Dana 30 - DIY 1 ton OTK steering setup!
HTML-код
- Опубликовано: 15 апр 2021
- In this episode I try to explain what a 1-ton steering is, what the benefits are and what to think of when doing this on your Jeep.
How to ream the knuckles for a over the knuckle setup (OTK) and show you step-by-step how to make a one piece tie rod with 1-ton ends on a Dana 30 front axle.
This steering setup will apply on Jeep Wrangler TJ, YJ, Cherokee XJ and Grand Cherokee ZJ.
The 1-ton ends and tube I used was purchased from the Swedish company Mahlin Advanced mechanics and can be found here: advancedmechanics.se/allmanna...
#1tonsteering #dana30 #overtheknuckle - Авто/Мото
Very nice!!
Nice video, well done sir!
Thank you! 🙏🏻
Great vid sir. What was the name of that artist/song from the music you were reeming too? Amazing. Thanks
So what's the long term review of this setup? Happy with it?
Jag skulle säga kör på med musiken som du gjort hittills (Svar på han nedanför).
Kul med lite svenskar att kika på här på youtube 😍
Tack för kommentaren och kul att du följer 😄 ja det är högst en smaksak. Får helt enkelt ha lagom av allt så borde det bli bra 😄👍🏻
Excellent information. Buy a lift before you land up in surgery and can't go wheeling with your Jeep due to back problems.
Haha Thats a good advice 😅 I have an engine hoist but my garage is too small to fit it while The jeep is in there. A good reason to build a proper size garage though 👍🏻
Grymt bra video! Jag funderar på liknande mod på min. Brotchade du även pitmanarmen eller använde du original-kulleden där?
Tjena! I den ändan körde jag original p-ände 👍🏻
From Wish vehicle you us tie rod end or PN
Do have any problems with cleareance between tie rod and diff cover?
It was super tight But it cleared :)
@@reconjeepmods3774 Thanks. Do You remember backspacing of those wheels?
Borde man inte kunna köra med den långa leden i båda ändar så får man bättre frigång mot fälgen? 🤔🙂
Jo det borde man 😄 visserligen blir de isf gängade åt båda håll så när man vill justera toe så får man ta bort ena sidan och justera. Men annars funkar det 👍🏻
@@reconjeepmods3774 just det... Då får man bara hela varv som minsta justering... Kanske inte så smart som jag trodde 🤔😊
It may just be location and availability, but I can't see spending that much time and money on a Dana 30. I'd start with a 44 or 60 if I was going to do anything to it.
You are correct. 44s and 60s are very rare and expensive to find here in Sweden. The purpose with this XJ was 33s and light offroad. Thats Why I kept the turdy :)