I miss being street sweeper. sigh... but man your setup was exactly how I dream build back then. Congrads on going Scale. I've never seen anyone rocking it for some reason.
Hey Colton was your biggest issue with fitment on the work Kiwamis that it would hit the coilover? I like the way the car looks with an 18x9.5 +38 but want to make sure I don’t run into clearance issues.
@@ColtonRichter what about with the scale coilovers I have a similar ride height on my Godspeed coilovers but I want to run a 18x9.5 +38 is that possible?
I have a Mazda 6 2012 Cv axle new both sides Inner outer tie rods both sides Adjusted upper control arm Send to alignment twice After install my rev 9 coils overs My steering wheel not return to center And wobble at lower speeds Any idea what can be?
Hey, if take that box out from under the car and still have the stock air filter will it still hetnrn air to keep it cool? And I don't have to do emissions where I live, so could I cut out both resonators? Or just the second one? And do you have a muffler? Or is it straight piped from the 2nd resinstor?
1. You won't notice a difference in the air temperature 2. I'm running an aftermarket catback 3. There's only one resonator, keep it and delete your muffler
Hey Colton, for the rear shock did you have to get a longer bolt for where it bolts into the rear control arm/brake assembly? I’m installing coil overs into mine
Hi ! This look so awesome! By the way I saw your modified swaybar on the rear where did you find it? I have a Mazda 5 2012 and can't find one anywhere.... love your channel my friend don't stop!!
I high key love the white rims. It's a nice color contrast to the dark Grey. However those new ones did look pretty slick. Hopefully you'll be able to figure out a way to make the new ones work with that lowered ride hight
Hey Colton, for the rear spring, did the adjustable part come with a rubber or rubber coating? As I’ve installed my coilovers and the rear ones are creaking from prongs, suspecting it’s the metal on metal
@@ColtonRichter perfect so it wouldn’t be the metal part on the height adjuster for the rear spring rubbing on the arm? I tried moving the spring around but it’s snug and doesn’t move
Would you sale your old set of shocks to me? Lmk thanks. I was told my back camber arms are bad. Toed in to much and it eats my tires up on the inside edge only.
@@ColtonRichter I don't make alot and I have to drop it off next week to get a new clutch put in. I have an 86,000 mile engine, 23,000 transmission. New struts and springs(stock), new rotors and pads(did them in april), used(almost new) headlights and the rims that came one the car are 17" rims from a 2008 Honda Accord ex. And I put brand new tires on in august
I miss being street sweeper. sigh... but man your setup was exactly how I dream build back then. Congrads on going Scale. I've never seen anyone rocking it for some reason.
Cheers! ✌🏻
Look nice
That’s how I want my mazda3 hatchback
Loooooooowwwwwww
Same bro same
i just bought a mazda 3 last weekend and i’m thinking about lowering it since the driver side strut doesn’t work
Dump it
That's low brother 😮😮😮
I pity your front bumper 😢
😂
Hey Colton was your biggest issue with fitment on the work Kiwamis that it would hit the coilover? I like the way the car looks with an 18x9.5 +38 but want to make sure I don’t run into clearance issues.
Yeah with a BC coilover I just needed to run a 3mm spacer to clear so (35 offset)
@@ColtonRichter what about with the scale coilovers I have a similar ride height on my Godspeed coilovers but I want to run a 18x9.5 +38 is that possible?
I have a Mazda 6 2012
Cv axle new both sides
Inner outer tie rods both sides
Adjusted upper control arm
Send to alignment twice
After install my rev 9 coils overs
My steering wheel not return to center
And wobble at lower speeds
Any idea what can be?
DM me!
Hey, if take that box out from under the car and still have the stock air filter will it still hetnrn air to keep it cool? And I don't have to do emissions where I live, so could I cut out both resonators? Or just the second one? And do you have a muffler? Or is it straight piped from the 2nd resinstor?
1. You won't notice a difference in the air temperature
2. I'm running an aftermarket catback
3. There's only one resonator, keep it and delete your muffler
Love the build I was wondering what lights you have they look sweet
ruclips.net/video/iiTg5s5Ql84/видео.htmlsi=7jkj5EWkbv5mFhMI
Thanks
Hey Colton, for the rear shock did you have to get a longer bolt for where it bolts into the rear control arm/brake assembly? I’m installing coil overs into mine
Only for 2nd gen installing 1st gen shocks into it
@@ColtonRichter perfect thank you! Got mine installed but making creaking noises, I asked other questions sorry haha
Hi !
This look so awesome!
By the way I saw your modified swaybar on the rear where did you find it?
I have a Mazda 5 2012 and can't find one anywhere....
love your channel my friend don't stop!!
Lots available, just have a Google search mate
I high key love the white rims. It's a nice color contrast to the dark Grey. However those new ones did look pretty slick. Hopefully you'll be able to figure out a way to make the new ones work with that lowered ride hight
It'll take awhile to get used to but the new ones will look great when fitted 💪🏻
@@ColtonRichter OH absolutely, I have no doubt about that! Once you get it dialed in, it'll be perfect.
Hey Colton, for the rear spring, did the adjustable part come with a rubber or rubber coating? As I’ve installed my coilovers and the rear ones are creaking from prongs, suspecting it’s the metal on metal
Could be anything from swaybar bushings to LCA bushings, trailing arms
@@ColtonRichter perfect so it wouldn’t be the metal part on the height adjuster for the rear spring rubbing on the arm? I tried moving the spring around but it’s snug and doesn’t move
I'm planning to set up my mazda 3 2008. What is your recommended spoiler, the OEM or the ducktail?
Both are OEM, whatever you prefer
What size rim and tire did you use
18x9.5 et38 225 40 18
What are those brake lights on the bottom you got on your whip bro? I wanna get me sum for my car.
Bumper reflector lights
@@ColtonRichter did you get them on Amazon?
eBay I think
Bro you make me miss my Mazda 3
Get another
@@ColtonRichter plan on it. Just saving up money
Absolutely awesome.😊😊😊
Thanks a lot 😊
DUDE if I’m honest, I was giggling hard seeing her that low! Damn it looks killer 😍
We went low but never this low 🫡
Hey are you selling your bc coils?
Sold
Sorry
😂
Looks dope
tis low but i'd always go stiffer in the rear wiht fwd platforms
Rear end is a lot lighter since FWD, so with these specific rates it tends to be a lot stiffer anyway.
Next video - "How to fit a wide arch body kit" 😂 love it bro looks so sweet 🙌
😂
Fireeee
My mazda 3 is horrible in the rain the ass end gets really lose when driveing in the rain. Like it will spin you around if your not careful!
Sounds like ya need som work
Would you sale your old set of shocks to me? Lmk thanks. I was told my back camber arms are bad. Toed in to much and it eats my tires up on the inside edge only.
Sold
Damnnn
Daaaamnnn looks cleaaaaan. Wanna lower my Hatch now 🥲
Dumpppppppp
Surly you send thos old ass bc’s over here to nz 😂💚
Sollllld
I want to dump my speed😩
Keepcit drivable tho haha
I wish i had the $$ to make mine look like yours
Doesn't need to cost a whole lot!
@@ColtonRichter I don't make alot and I have to drop it off next week to get a new clutch put in. I have an 86,000 mile engine, 23,000 transmission. New struts and springs(stock), new rotors and pads(did them in april), used(almost new) headlights and the rims that came one the car are 17" rims from a 2008 Honda Accord ex. And I put brand new tires on in august
@@ColtonRichter I might just paint the rims. I sent you a picture of my car on FB messenger
@@ColtonRichter I was thinking of putting Mazda CX-9 Rims on mine like you use to have. They look really nice on the car
The mazda parts are pretty cheap
Super low bro.
Low low