✅ HOW TO SUPPORT MY CHANNEL SUBSCRIBE : ruclips.net/user/mwawoodworks JOIN my Patreon community: patreon.com/MWAWoodworks GET project plans: bit.ly/download-project-plans ✅ TOOLS AND SUPPLIES IN THIS VIDEO: ►Spectape Two Sided Tape - amzn.to/3IxTMma ►True Position Cabinet Hardware Jig - amzn.to/3KDHjjK ►Kreg Shelf Pin Jig (new model) - amzn.to/3kwugpG ►Bangood Pocket Hole Jig - amzn.to/3Zonuki ►Kreg Pocket Hole Jig (new model) - amzn.to/41qvovu ►Castle TSM 12 Pocket Hole Cutter - castleusa.com/products/tsm-12-benchtop-pocket-cutter-machine.html ►Festool LR32 System - amzn.to/3KxTmPw *As an Amazon Associate I earn from qualifying purchases
I feel like that cat that ate the canary, a (not so local) cabinet shop was WAY over stock on 1/2" UV Birch and I bought 30 sheets for $22 a sheet, per SHEET (yes 4x8). I'm gonna feel like a monster when I use that for underlayment.
I just watched 3 or 4 videos and have to say I really enjoy like how you keep things moving along. You share a lot of info and a relatively short span of time. No fluff, dumb, dry humor that is painful to watch or loud obnoxious music playing over your speaking. Thank you and you've got another subscriber.
Thanks, I picked up a bunch of tips! For laying out drawer slides, plywood is a great idea. But if you start from the lowest slide and cut pieces to stack up to all your slide install lines you can use the same pieces of plywood to lay out the drawer slides in more than one cabinet instead of cutting up a piece of plywood for each one. If you start from the top and cut it down to size as you go you lose the width of the kerf and can't reuse. Even if you are only making one, you can still do all the slides on one side at the same time instead of switching back and forth and there's no running to the saw every few minutes. It'll save a lot of time- efficiency in all things comes from doing repetitive tasks as many times as possible without moving.
Fantastic video. Definitely one of the best cabinet Q&A type videos I've seen. I love that in several sections you offered an affordable jig/tool and an upgrade option, especially for things like pocket holes and shelf pins where the affordable option remains useful even after you upgrade.
At 70 years old I am planning to redo our 50 year old kitchen and my intention is to build the cabinets myself. I really enjoy your videos, very informative and educational. I do though have a question. In the background of many scenes of this video there is a three door wall cabinet. The doors have a wider gap between the center and right door than the center and left door. Is there a reason for this?
Superb video. Not a lot new to me bit all in one place - materials, tools, methods. Clear, well-spoken. And I can translate to millimetres in my head (UK, started from age 4 with £, shillings, pence, ha'pennies and miles, yards, feet, inches, and tons, cwt, pounds, ounces, and gallons, quarts and UK pints at 20 floz. Age 15, we went decimal and did science to university). It's a useful and fun discipline to beat folk with calculators!
And experience is just how many times somones gone wrong and fixed it. So someone much better than you has already solved the problem. You just need to find the internet article.
I did not know that pre finished plywood was still paintable. I have been looking for pre finished on one side for my kitchen because i planned on painting them. You just saved me a huge headache!
love building with prefinished c2 maple plywood :). Local distributor has it for $105 / sheet, and it is definitely my go to when building new cabinets for customers don't care what the material is.
06:00 I'm a drummer, and I also happen to be Italian. We use the metric system here so I was spacing out while you were laying out (eheh) the standard measures... But man those drums in the background music sound amazing! Aaand nice tips too lol
I really enjoy your videos. I bought your plans for the drill charging station, and it has really improved my shop organization. You inspired an Ephinay when you explained why you use pre-finished plywood. I find myself not wanting to finish shop projects, but it makes so much more sense to use pre-finished plywood because you don't have to sand or set up to spray the project. Thank you for your videos. They are very helpful for me.
Here's something I've been thinking about: I have some kitchen cabinets I'm building that will all be drawer units. In this instance, do the bottoms need to be solid panels, or will stretchers like those typically used for the tops be sufficient? It's a span of three 24" cabinet boxes that will be screwed together. I could save some money by using stretchers instead of solid panels.
Excellent video! I am just starting on my first cabinet building project. First run is a cabinet to mount my drill press. Then on to replacing all my kitchen cabinets. Not certain if I am crazy for tackling this or nor.
Wow this whole time I assumed painting on pre finished wouldn't yield the best results. Thanks for making that clear! You're the best man, wishing you continued success on your channel! 👊
Awesome!!! I also use your cabinet plans I purchased a while ago as a great go to reference when I work build cabinets myself. 👍🏽 Thanks for your content and instructional style.
Yeah that Rockler drawer slide jig is the biggest piece of junk I’ve ever bought, fully 3/16” off 90 degrees from the face over its length. I had it for too long before trying it and couldn’t return it, it’s the only tool I’ve ever just tossed in the garbage unused. The method you show is by far the best, even though I don’t really have that much scrap hat large sitting around 🙂
One of the first tools I bought after my table saw was the castle. The pockets don’t look like amateur hour, they look machined and precise (which they are).
I think one of the biggest things for me was realizing the OUTSIDE dimensions of a face frame carcass don’t matter. It’s the face frame itself, and the INTERIOR dimensions (stretchers, bottom/tops) that are most important to get right. And bc of the variability of plywood thickness, the exterior carcass size doesn’t matter
Love pocket holes for construction. My Kreg jig is made completely of aircraft aluminum with steal inserts. it is one of the first ones that the company made and is about 30 years old and it is still being used although I have a newer jig now. I like the box you have for the jig. Thanks for this video...
very nicely done vid. thank you. one question about drilling shelf pin holes with a router.... what bits are you using? i know end mills are horrible for drilling and ive burnt up quite a few that way on the cnc.
I'm a newbie wanting to build my own kitchen cabinets and my preference is to use a separate kick plate. If I'm using a separate kick plate, do I subtract the height of the kick plate from the standard height of the base kitchen cabinet? For example, if the height of my kick plate is 3.5 inches, the height of my base cabinet will be 31 inches (34.5 inches - 3.5 inches). Is this correct?
Excellent video. Love your content. One question I have is how wide do you make your drawers, particularly when using side mount slides. Do you subtract just the width of the slides from the carcass?
Thanks for the videos. I really enjoy your style of teaching! I have purchased the plans and am in the process of building some cabinets for my shop. I see that you used prefinished plywood for your boxes. Do you use any kind of finish on the face frames and drawers on your shop furniture? If I am using unfinished plywood and will be using Hickory for the frame, should I be using a finish? or is it not necessary since it is "just shop" furniture? Thanks again!
Enjoyed the video. Thank you! One ? - I've recently tried pocket hole assembly of drawer boxes and can't find a screw head that works with 1/2" Baltic without protruding past the primary surface. Is that why you are using 5/8?
Was considering using one side finished plywood. Do you sand the finish and primer before painting the pre finished or just prime and paint without sanding?
Yeah you just have to be careful with bit breakage. A big issue with the foreman because it still uses the same drill bit as a regular kreg jig but not really designed for that much efficiency like the Castle machines which use routers instead.
GREAT video, so helpful......thanks for making it!!! I'm working with prefinished plywood for the first time right now. Is there a good way to apply finish (and what kind to use) to the exposed cut edges or should they just be left unfinished? Never knew you could paint it either so thanks for sharing how to do that. When you use the double sided tape for drawer slides, etc. do you just leave it on the project or take off after the holes are drilled and before installation? Thanks so much if you can answer these questions!
In professional world, we would use spray lacquer or whatever spray clear it was. Just make sure that it matches the color fairly well. Just spray that on the exposed edge of the drawer boxes facing up. Other than that, I can't think of any spot where you would have visible plywood end grain.
@@SawdustmakerLori No prob. I personally would test it out on a scrap, give it like an hour to dry, then see if you like it or if it matches well enough to be passable. It won't be perfect match, but that is the easiest way to handle that issue that I know of.
Funny for aligning drawer slides on the sides of the cabinets I've been using the same approach for year. But with the price of plywood, I've gone to keeping smaller scraps, and join joining them together with Domino for new cabinets.
Excellent video. I sure wish I'd seen it 3 months ago:-) BTW, how do you record audio in your shop with no echo? I can't seem to find the right formula.
I watched your cabinet video (fantastic) and am using that info to build my miter saw bench. This video answered some questions but I still have one more. Concerning the 1/4" plywood back panel, Is it for squaring the cabinet or just so it looks finished from the inside? I'm thinking it isn't necessary for a shop miter saw station when all the cabinets will have drawers so the back of the cabinet isn't visible.
@@MWAWoodworks awesome, thanks. I can save my extra sheet of quarter inch birch ply for more drawer bottoms and french cleat holders. I really appreciate the quick response since I'm starting to cut the carcasses tomorrow morning. You're the best.
Some great tips. I can't access your plans on your website as according to my antivirus software your website has malware. Just thought you should know so you could fix it.
What brand of side mount soft close drawer slides do you use? For the most part, I have had bad luck with all that I have used. I realize a precise installation is key to them, but still...
Great info on some good tips and tricks. I enjoy cabinet making, and some of these tips will only make building them that much faster and easier. Thanks
This video solves a lot of problems and will save me sooo much time in building cabinets. Building them upside down is a simple solution to a difficult procedure. why in the hell didn't think of that. If we really want to punish Putin we make him install drawer glides for eternity without watching this video!!!!. Thanks a Bunch young man.
Do you have a video on how you paint these with the Sherwin Williams paint products? And do you seal the edges of the face to face frames on the doors or leave them clean? And are the faces pre-finished 1/4” ply too?
Thinking of building a coffee bar for my kitchen about 56"x24"x34", single doors on the ends and drawers in the middle. Should I build it in one piece with 3\4 ply or would it be too heavy to move from garage to kitchen or just make it in 3 pieces?
I did the same thing for a kitchen island build and built it all as one unit. I was able to carry it with the help of one other person . Took off doors and drawers to move it.
✅ HOW TO SUPPORT MY CHANNEL
SUBSCRIBE : ruclips.net/user/mwawoodworks
JOIN my Patreon community: patreon.com/MWAWoodworks
GET project plans: bit.ly/download-project-plans
✅ TOOLS AND SUPPLIES IN THIS VIDEO:
►Spectape Two Sided Tape - amzn.to/3IxTMma
►True Position Cabinet Hardware Jig - amzn.to/3KDHjjK
►Kreg Shelf Pin Jig (new model) - amzn.to/3kwugpG
►Bangood Pocket Hole Jig - amzn.to/3Zonuki
►Kreg Pocket Hole Jig (new model) - amzn.to/41qvovu
►Castle TSM 12 Pocket Hole Cutter - castleusa.com/products/tsm-12-benchtop-pocket-cutter-machine.html
►Festool LR32 System - amzn.to/3KxTmPw
*As an Amazon Associate I earn from qualifying purchases
Just another great video that makes me feel like I can build my own cabinets
I feel like that cat that ate the canary, a (not so local) cabinet shop was WAY over stock on 1/2" UV Birch and I bought 30 sheets for $22 a sheet, per SHEET (yes 4x8). I'm gonna feel like a monster when I use that for underlayment.
I just watched 3 or 4 videos and have to say I really enjoy like how you keep things moving along. You share a lot of info and a relatively short span of time. No fluff, dumb, dry humor that is painful to watch or loud obnoxious music playing over your speaking. Thank you and you've got another subscriber.
I agree with you 100%. Too many youtubers THINK they are funny making their videos less appealing.
Thanks, I picked up a bunch of tips! For laying out drawer slides, plywood is a great idea. But if you start from the lowest slide and cut pieces to stack up to all your slide install lines you can use the same pieces of plywood to lay out the drawer slides in more than one cabinet instead of cutting up a piece of plywood for each one. If you start from the top and cut it down to size as you go you lose the width of the kerf and can't reuse. Even if you are only making one, you can still do all the slides on one side at the same time instead of switching back and forth and there's no running to the saw every few minutes. It'll save a lot of time- efficiency in all things comes from doing repetitive tasks as many times as possible without moving.
Fantastic video. Definitely one of the best cabinet Q&A type videos I've seen.
I love that in several sections you offered an affordable jig/tool and an upgrade option, especially for things like pocket holes and shelf pins where the affordable option remains useful even after you upgrade.
Thanks for your support!
I’ve been making cabinets for 30+ years and I learned a ton from this video. Thank you.
How is that poss?
I love your no BS and high info style of teaching/explaining. Nice video, please keep it up!
Thanks for your support John!
At 70 years old I am planning to redo our 50 year old kitchen and my intention is to build the cabinets myself. I really enjoy your videos, very informative and educational. I do though have a question. In the background of many scenes of this video there is a three door wall cabinet. The doors have a wider gap between the center and right door than the center and left door. Is there a reason for this?
Superb video. Not a lot new to me bit all in one place - materials, tools, methods. Clear, well-spoken. And I can translate to millimetres in my head (UK, started from age 4 with £, shillings, pence, ha'pennies and miles, yards, feet, inches, and tons, cwt, pounds, ounces, and gallons, quarts and UK pints at 20 floz. Age 15, we went decimal and did science to university). It's a useful and fun discipline to beat folk with calculators!
Golden Rule - There is no substitute for experience.
For sure!
That’s was a bunch of good info!
Would like to add, no fear. Cut, and then decide to proceed with what you got or to try again.
And experience is just how many times somones gone wrong and fixed it.
So someone much better than you has already solved the problem. You just need to find the internet article.
That’s assuming you have it on your first attempt…I’d counter by saying “planning & prep” is the golden rule.
I did not know that pre finished plywood was still paintable. I have been looking for pre finished on one side for my kitchen because i planned on painting them. You just saved me a huge headache!
Yes if you scuff sand it and prime it you can definitely paint it.
saved this vid -to review as i did project
great tips that i used.
and i really liked the way you presented
the whole process.
love building with prefinished c2 maple plywood :). Local distributor has it for $105 / sheet, and it is definitely my go to when building new cabinets for customers don't care what the material is.
06:00 I'm a drummer, and I also happen to be Italian. We use the metric system here so I was spacing out while you were laying out (eheh) the standard measures... But man those drums in the background music sound amazing!
Aaand nice tips too lol
I really enjoy your videos. I bought your plans for the drill charging station, and it has really improved my shop organization. You inspired an Ephinay when you explained why you use pre-finished plywood. I find myself not wanting to finish shop projects, but it makes so much more sense to use pre-finished plywood because you don't have to sand or set up to spray the project. Thank you for your videos. They are very helpful for me.
Love it!
Just make friends with some painters.
If you have good trade skills, there is a whole underground economy of labor trades amongst the working man.
Hands down, one of the most informative Q&A video. Thx
Thanks for the video… i woodwork but haven’t made kitchen grade cabinets. Appreciate the full breakdown 🫡
A lot of very useful information. Thank you very much for sharing.
I love that kreg box! Nice an simple
Really, really useful video. I'm just about to embark on my most ambitious woodwork job ever - building my own kitchen. Your video is a great help.
You're a good teacher.
Right!?
This was Fantastic info! Thank u for taking the time.
Here's something I've been thinking about: I have some kitchen cabinets I'm building that will all be drawer units. In this instance, do the bottoms need to be solid panels, or will stretchers like those typically used for the tops be sufficient? It's a span of three 24" cabinet boxes that will be screwed together. I could save some money by using stretchers instead of solid panels.
Outstanding presentation of information thank you!
Awesome video very helpful thank you
Thanks!
Excellent video! I am just starting on my first cabinet building project. First run is a cabinet to mount my drill press. Then on to replacing all my kitchen cabinets. Not certain if I am crazy for tackling this or nor.
Hahaha no way to learn like jumping in!
So many good tips. Thank you
Wow this whole time I assumed painting on pre finished wouldn't yield the best results. Thanks for making that clear! You're the best man, wishing you continued success on your channel! 👊
Thanks Charles!
Thanks for all the great info!
Thanks for the video!
You're welcome!
Fantastic video. Really breaks things down into manageable, easy to understand bites.
This is very useful video and really appreciate your animations showing various size calculations. Thank you!
Ha thanks!
I didn’t know you were in the Nashville area! We are in MJ. Found your tips to be super helpful! Thanks for another great video 👍
I am indeed!
Super Video, Greetings from Vienna.
Awesome!!! I also use your cabinet plans I purchased a while ago as a great go to reference when I work build cabinets myself. 👍🏽
Thanks for your content and instructional style.
👊
Yeah that Rockler drawer slide jig is the biggest piece of junk I’ve ever bought, fully 3/16” off 90 degrees from the face over its length. I had it for too long before trying it and couldn’t return it, it’s the only tool I’ve ever just tossed in the garbage unused. The method you show is by far the best, even though I don’t really have that much scrap hat large sitting around 🙂
Thanks Mate, excellent video - very helpful. *highfive* from Australia
Thank you sir!
One of the first tools I bought after my table saw was the castle. The pockets don’t look like amateur hour, they look machined and precise (which they are).
🙌
I think one of the biggest things for me was realizing the OUTSIDE dimensions of a face frame carcass don’t matter. It’s the face frame itself, and the INTERIOR dimensions (stretchers, bottom/tops) that are most important to get right. And bc of the variability of plywood thickness, the exterior carcass size doesn’t matter
Yeah for sure in order to get your drawers sized right!
Love pocket holes for construction. My Kreg jig is made completely of aircraft aluminum with steal inserts. it is one of the first ones that the company made and is about 30 years old and it is still being used although I have a newer jig now. I like the box you have for the jig. Thanks for this video...
I would suggest putting the wood measurements in millimeters (MM) to make things easier, but anyway, very cool video!
Thank you. One day I will make some cabinets in MM but today it's too expensive to design in both measurements.
Great video. I would love to watch you install some hinges.
UV Coated is your second guess. UV light is used to cure the coating making it more durable and scratch resistant. Great videos keep them coming.
Great video! Simplifying some seemingly complex issues.
Thanks Ted! Glad to help out.
Great video! Very informative! 👊🏼
Thanks!
Great video. Thanks
You're welcome 🤗
Good info.
Great information! Thanks for sharing!
You're welcome Dennis!
The right tools make a tremendous difference!
Excellent video. Thank you!
You're welcome 😊
Helpful video. Thanks for sharing.
very nicely done vid. thank you. one question about drilling shelf pin holes with a router.... what bits are you using? i know end mills are horrible for drilling and ive burnt up quite a few that way on the cnc.
The LR 32 system comes with it's own bits that are a hybrid of a drill bit and router bit to make clean holes on both sides of the cut
I'm a newbie wanting to build my own kitchen cabinets and my preference is to use a separate kick plate. If I'm using a separate kick plate, do I subtract the height of the kick plate from the standard height of the base kitchen cabinet? For example, if the height of my kick plate is 3.5 inches, the height of my base cabinet will be 31 inches (34.5 inches - 3.5 inches). Is this correct?
Excellent video. Love your content. One question I have is how wide do you make your drawers, particularly when using side mount slides. Do you subtract just the width of the slides from the carcass?
Correct. For full extension side mounts, subtract 1 inch from the width of the opening.
great video, thanks, man!
I love prefinshed plywood
Yeah it's a game changer
If you're going to do production cabs you May want to invest in a machine to drill for adjustable shelves
Great advice! Exactly what I used to use to coach new programmers and engineers in CPU design. Keep it up!
Thanks for the videos. I really enjoy your style of teaching! I have purchased the plans and am in the process of building some cabinets for my shop. I see that you used prefinished plywood for your boxes. Do you use any kind of finish on the face frames and drawers on your shop furniture? If I am using unfinished plywood and will be using Hickory for the frame, should I be using a finish? or is it not necessary since it is "just shop" furniture? Thanks again!
I think you can do whatever you want. I like mine unfinished for my shop.
Enjoyed the video. Thank you! One ? - I've recently tried pocket hole assembly of drawer boxes and can't find a screw head that works with 1/2" Baltic without protruding past the primary surface. Is that why you are using 5/8?
Yeah pocket screws aren't really a good option for 1/2. You can do it but you need a special adapter
Could you make a video on table saw setup please
Question about the pocket hole jig from Enjoywood. Do the kreg drilling bits fit on it or that one use metric size bits?
It uses the same size bits and same size screws
Are you still using Nashville plywood since they moved?
“One day you might use it for something” hahahaha ok I’m not the only one
Great tutorial. Whats your opinion on plywood thickness for face frame cabinets. 1/2 or 3/4 for sides and 1/4 or 1/2 for the back?
I use 3/4 for the carcass and 1/4 for the back
Was considering using one side finished plywood. Do you sand the finish and primer before painting the pre finished or just prime and paint without sanding?
prime and paint without sanding
UVlight is used during the finishing process so the plywood can be stacked at the end of the finishing process
Yeah I've since done some research of Columbia Forrest Products process and learned the same thing
Lots of excellent tips there, Matt! Thanks a bunch! 😃
Stay safe there with your family! 🖖😊
Thank you!
Great video, thanks man
Thank you Zach!
A good compromise for the castle pocket hole machine is the Kreg Foreman. Very fast and easy to use for around $300.
Yeah you just have to be careful with bit breakage. A big issue with the foreman because it still uses the same drill bit as a regular kreg jig but not really designed for that much efficiency like the Castle machines which use routers instead.
Great info! Thanks
Thank you!
Hi what’s the model of the small drill your using to place the screws in, thanks great video’s helps out lots
Very good but you did not cover undermount for slides spacing versus side mount spacing four box sizes of drawers
UV Plywood uses a UV resistant coating to protect it from fading.
Depending on which true position jig they have a shelf pin jig included also
Thats true they do have an attachment for shelf pins!
GREAT video, so helpful......thanks for making it!!! I'm working with prefinished plywood for the first time right now. Is there a good way to apply finish (and what kind to use) to the exposed cut edges or should they just be left unfinished? Never knew you could paint it either so thanks for sharing how to do that. When you use the double sided tape for drawer slides, etc. do you just leave it on the project or take off after the holes are drilled and before installation? Thanks so much if you can answer these questions!
In professional world, we would use spray lacquer or whatever spray clear it was. Just make sure that it matches the color fairly well.
Just spray that on the exposed edge of the drawer boxes facing up. Other than that, I can't think of any spot where you would have visible plywood end grain.
@@jeffshackleford3152 Thanks so much for taking the time to reply Jeff! You're the only one I received an answer from so appreciate it!!!
@@SawdustmakerLori No prob.
I personally would test it out on a scrap, give it like an hour to dry, then see if you like it or if it matches well enough to be passable.
It won't be perfect match, but that is the easiest way to handle that issue that I know of.
@@jeffshackleford3152 Great advice.....I'll do that. Thanks again and have a great upcoming week!
@@SawdustmakerLori Iron on edge banding is also easy to get the hang of. Watco satin matches well.
Funny for aligning drawer slides on the sides of the cabinets I've been using the same approach for year. But with the price of plywood, I've gone to keeping smaller scraps, and join joining them together with Domino for new cabinets.
Excellent video. I sure wish I'd seen it 3 months ago:-) BTW, how do you record audio in your shop with no echo? I can't seem to find the right formula.
I watched your cabinet video (fantastic) and am using that info to build my miter saw bench. This video answered some questions but I still have one more. Concerning the 1/4" plywood back panel, Is it for squaring the cabinet or just so it looks finished from the inside? I'm thinking it isn't necessary for a shop miter saw station when all the cabinets will have drawers so the back of the cabinet isn't visible.
You don't have to include the 1/4 backs, just the nailers and stretchers are important for structure
@@MWAWoodworks awesome, thanks. I can save my extra sheet of quarter inch birch ply for more drawer bottoms and french cleat holders. I really appreciate the quick response since I'm starting to cut the carcasses tomorrow morning. You're the best.
Some great tips. I can't access your plans on your website as according to my antivirus software your website has malware. Just thought you should know so you could fix it.
Thanks for the notice, but it doesn't have any malware! You can also go to shopmwawoodworks.com and buy them there as well.
What brand of side mount soft close drawer slides do you use? For the most part, I have had bad luck with all that I have used. I realize a precise installation is key to them, but still...
I don't have a brand that I favor on side mounts. I get whatever home depot or Amazon sells. I find all side mount slides to be virtually the same.
What kind of router bit do you use when doing shelf pin holes?
I use the ones that come with the festool lr32 system. 5mm
Nashville, TN..... I'm just up the road in Clarksville.
👋
How do you determine the size of the face frame openings for drawers? Is it standardized, custom or both?
I usually make my face frames with a 1/4" or 1/8" overhang on the inside of the cabinet
Great info on some good tips and tricks. I enjoy cabinet making, and some of these tips will only make building them that much faster and easier. Thanks
Glad it was helpful!
The cabinet man is back
🙌👊
Great vid! I’m a SpecTape man from way back! Thanks for sharing. Scott
What is the plywood core you use? My local supplier has mdf next to the outer veneer layer. Is that okay for a kitchen?
You missed one:
Attaching cabinet doors. How do you attach cabinet doors and ensure they are straight, they close well and are spaced correctly?
This video solves a lot of problems and will save me sooo much time in building cabinets. Building them upside down is a simple solution to a difficult procedure. why in the hell didn't think of that. If we really want to punish Putin we make him install drawer glides for eternity without watching this video!!!!. Thanks a Bunch young man.
😀
Do you have a video on how you paint these with the Sherwin Williams paint products? And do you seal the edges of the face to face frames on the doors or leave them clean? And are the faces pre-finished 1/4” ply too?
I do have a video on my painting process
Can you leave a link for the video you have on how you paint pre finished plywood? I am curious if you need to sand first.
Do i have to put a base on the cabnet
What do you mean like a toe kick?
Yes
You can also build a separate base and set the cabinets on them
Thinking of building a coffee bar for my kitchen about 56"x24"x34", single doors on the ends and drawers in the middle.
Should I build it in one piece with 3\4 ply or would it be too heavy to move from garage to kitchen or just make it in 3 pieces?
I did the same thing for a kitchen island build and built it all as one unit. I was able to carry it with the help of one other person . Took off doors and drawers to move it.
@MWAWoodworks thanks I figured it would be OK but it will be my first time making something that big in one go
That ply would be over $150 per sheet here in the uk!
YIKES!
Were can i get the router bit for the 1/4 in panel that is not a 1/4 in in thickness
amzn.to/3sj7lxn
Thank you!
You're welcome
Great video, thanks
I’m also near Nashville! Where do you usually get your hardwoods from?
Mimms lumber
I am building this project and have purchased the plans. One thing missing is the hardwood (Maple) Optimized. Do you have this that you could share?
I do not. Not really possible since hardwood boards are not sold in a standard size like plywood.