What level of Embrillance software are you using? I am struggling trying to do a split large design with a different brand of software. I need a simple way to achieve a split design for 14 x 14 mighty hoop. I have the same embroidery machine as you do, you made it look easy.
I delayed this process because I thought it was way too difficult. It was super simple using Embrilliance. I believe you can do it with Essential. Follow the steps as shown inn the many RUclips videos… check multi-hoop or repostional hoop for the hoop size. I have a few modules. Essentials, Enthusiast, Merrowly, and Stitch A Artist 1. However, I’m almost sure I have read this can be accomplished using Essentials.
I have the mighty and a brother 1055x. I have followed this video but when i get to the 1st split screen, It gives me an error message saying “this embroidery frame cannot be used”. I researched and found that I needed to buy enthusiasts. I did and got the same results. I have $400 invested in this with no results. Can you advise me what is wrong?
Oh no! Couple things come to mind. -Check to make sure you have the latest update for the software. -I had to make sure that there “B-Arm” was attached to use the 14 x 14 jumbo hoop. -You might try a different design (one you’re already familiar with) just to make sure it’s not this actual design with an issue. -You might want to reach out to the Customer Support team at Embrilliance (they are a great resource)!
I needed this, thank you!!!
You're so welcome! Thanks much for watching!
I saw something this big on someone’s jacket and was wondering what size hoop was used and this might be it!!! Thanks for sharing
My pleasure… thanks much for watching!
What level of Embrillance software are you using? I am struggling trying to do a split large design with a different brand of software. I need a simple way to achieve a split design for
14 x 14 mighty hoop. I have the same embroidery machine as you do, you made it look easy.
I delayed this process because I thought it was way too difficult. It was super simple using Embrilliance.
I believe you can do it with Essential. Follow the steps as shown inn the many RUclips videos… check multi-hoop or repostional hoop for the hoop size.
I have a few modules. Essentials, Enthusiast, Merrowly, and Stitch A Artist 1. However, I’m almost sure I have read this can be accomplished using Essentials.
Thank you for your prompt reply. I downloaded a trial version of Embrillance Essentials and it looks like it may solve my problems. Thank you again!!
@@josephabate1179 Good luck! Please leave me an update. This will help others with the same question.
I have the mighty and a brother 1055x. I have followed this video but when i get to the 1st split screen, It gives me an error message saying “this embroidery frame cannot be used”. I researched and found that I needed to buy enthusiasts. I did and got the same results. I have $400 invested in this with no results. Can you advise me what is wrong?
Oh no! Couple things come to mind.
-Check to make sure you have the latest update for the software.
-I had to make sure that there “B-Arm” was attached to use the 14 x 14 jumbo hoop.
-You might try a different design (one you’re already familiar with) just to make sure it’s not this actual design with an issue.
-You might want to reach out to the Customer Support team at Embrilliance (they are a great resource)!