Scorpion exhaust installation on Yamaha Tracer 900 2019 original vs. Scorpion pure sound

Поделиться
HTML-код
  • Опубликовано: 25 ноя 2024

Комментарии • 63

  • @letitrest4662
    @letitrest4662 2 года назад +7

    An honest opinion. I've been riding for forty-two years. My current ride is a 2013 Yamaha Fjr1300a. My last trip was 7835 miles. I appreciate the quiet, on a long trip, of the stock exhaust on my FJR. It's been my observance that sound level has a lot to do with fatigue. Having no droning exhaust sound works. I've logged up to 952 miles in a day. The quieter the better. I use a set of Bose Noise Canceling ear buds. At 65 mph, and the windshield positioned correctly, the noise inside my Shoei GT Air, is nearly dead quiet. I plug my ear buds into my Galaxy phone, and use Pandora, or Audible for a book, or stored music. Great entertainment and no droning exhaust noise to wear you down, and take away the bliss.

    • @dogsnmotorcycles
      @dogsnmotorcycles Год назад

      I totally agree with you. I've had my fj-09 for 7 years with the stock exhaust, but my biggest problem with it, was its ugliness. I finally changed it to a slip on that's similar to this one, but I also bought the stage 2 baffle. It sounds a little louder than stock, but at highway speeds, I can barely hear it. The after market muffler just looks better to me.

  • @bambamcanuto9532
    @bambamcanuto9532 10 месяцев назад +3

    Where do you get the middle pipe? Part number?

  • @stuarthall2523
    @stuarthall2523 4 года назад +3

    Good job. Sounds mint without the baffle in. 👍

  • @kingkrimson8771
    @kingkrimson8771 4 года назад +4

    Nice work on the cutting/grinding and the exhaust sounds good but if I decide to change the stock exhaust on my Tracer I think I will install Akrapovic full system

  • @LtShifty
    @LtShifty 4 года назад +3

    Dude I'm scared for you with that grinder! Awesome video though 😁

  • @twowheelsquirrel
    @twowheelsquirrel Год назад +1

    Only my opinion but.. I'd have cut into the CAT and cut off further down from the O2 sensor making a more secure join and then there's room for a clamp too

  • @valentinoschrysopoulos7046
    @valentinoschrysopoulos7046 5 месяцев назад +1

    Hey brother, that's a good job!
    I'm thinking to do exactly the same in my 2017 tracer, can I please ask you where can I find the link pipe (that looks like S) you add after you cut the manufacturer silencer?
    Thanks in advance.

    • @steveb12600
      @steveb12600 2 месяца назад

      I want to know also !!!

  • @MrJulianbowden
    @MrJulianbowden 3 года назад +7

    20 mins watching you undo the header bolts and 4 seconds of fitting the can !!

  • @bastiendr
    @bastiendr 4 года назад +2

    Hey, nice work here.
    You made soldering and spring for pipe connection and scorpion part?

  • @BigRy2023
    @BigRy2023 4 месяца назад

    Baffle out all the way 💥😁👌

  • @MA-jk2yc
    @MA-jk2yc 5 месяцев назад

    Is the linkpipe also only availble?
    Than i can mount the exhaust scorpion from my street tripple

  • @bambamcanuto9532
    @bambamcanuto9532 10 месяцев назад

    What’s the part number or model number of the scorpion exhaust? Where can I purchased? Info?

  • @josefelipe025
    @josefelipe025 2 года назад

    Nice job and excelent sound, please you can send me the scorpion link pipe connector? Thanks

  • @RicardoTheCraneOperator
    @RicardoTheCraneOperator 8 месяцев назад

    Cool 👍

  • @barnyboysdad
    @barnyboysdad 2 года назад

    the best part of this video is when that damn annoying background music stops ,as far as an exhaust note goes ,that's debatable I've got the same bike but fitted a delkevic sports system and its sound is waaay better than the scorpion note sorry man but that's just the way it goes, anyhoo happy New year to you and your bike, cheers 🍻 Robbie

  • @erickfimbres4989
    @erickfimbres4989 2 месяца назад

    All waiting the inf on mid pipe

  • @tracer1127
    @tracer1127 4 года назад +2

    Hi, thanks for showing us how to fit the pipe. Is there any difference with the power delivery of the bike afterwards and does the bike still run as smoothly etc ? Am thinking of fitting this to my own Tracer. Thanks.

    • @Modelar4ever
      @Modelar4ever  4 года назад

      Run like a champ 😊

    • @tracer1127
      @tracer1127 4 года назад +1

      I fitted the pipe to my bike. Easy to fit. Love it. No baffles.

    • @cruisingthethaiway6881
      @cruisingthethaiway6881 3 года назад

      It runs better without restrictions. See my video of easy way to modify the stock muffler

    • @IndieKeeko
      @IndieKeeko Год назад

      ​@@cruisingthethaiway6881put a link to your video

  • @alexspino9780
    @alexspino9780 3 года назад

    how can i do this mood? what should i buy?

  • @samisbk9975
    @samisbk9975 4 года назад

    Did you weld the new part with the stock pipe

  • @josefelipe025
    @josefelipe025 2 года назад +1

    where did you buy the mid pipe?

    • @Bujjja
      @Bujjja 6 месяцев назад

      Reply

  • @billhamilton7524
    @billhamilton7524 4 года назад +2

    doesnt the throttle work,??

    • @Modelar4ever
      @Modelar4ever  4 года назад

      It does. Why :)?

    • @billhamilton7524
      @billhamilton7524 4 года назад +3

      @@Modelar4ever oh just cause you didnt rev it up much,,was hard to tell how it sounded other than at an idle,,,i like how easy the baffle came out,,,i think i like it better in ,,,,but i think you revved it up more with it out than in ,,did you notice any throttle response or change in how it runs ,thanks for sharing

  • @rotterdamrider2332
    @rotterdamrider2332 2 года назад

    Why is he jerking on a connector in the begin the movie?
    It doesnt show hes disconnecting it.
    And why unscrew the side bolt 2x in the video.

  • @garyflynn2651
    @garyflynn2651 4 года назад

    did you weld the link pipe on? did you have to get your ecu flashed

    • @Modelar4ever
      @Modelar4ever  4 года назад

      You do not need to weld it, but I did. No need for ecu flash, because the pipes stay original.

  • @JoaoMendes-sg6hl
    @JoaoMendes-sg6hl 4 года назад

    good job. it got a spectacular sound. where did you buy the parts? slip on and the pipe? how much it cost? good curves

    • @Modelar4ever
      @Modelar4ever  4 года назад

      I bought it directly from Scorpion.

    • @josefelipe025
      @josefelipe025 2 года назад

      Scorpions doesn't sell that, the mid pipe

    • @josefelipe025
      @josefelipe025 2 года назад

      @@Modelar4ever Scorpions doesn't sell that, the mid pipe

  • @dogsnmotorcycles
    @dogsnmotorcycles Год назад

    Nice video, except for the constant music.

  • @speedjunkie69
    @speedjunkie69 3 года назад

    Did you flash the ecu after installing?

    • @Modelar4ever
      @Modelar4ever  3 года назад +1

      No, no need, because the pipes are original. This is only slip on.

  • @user-fl6ui1pr9l
    @user-fl6ui1pr9l 4 года назад

    Quality video! is this exhaust ec approved??

    • @Modelar4ever
      @Modelar4ever  4 года назад +1

      Yes for European market.

    • @MrDaveH4
      @MrDaveH4 4 года назад +2

      I have the same system for my FZ6 S2 and it is louder but road legal with the DB killer in and will pass an MOT here in the UK, with it out it sounds like a beast.
      Love this video as Tracer 900 is going to be my next bike.

    • @marekmarecki3670
      @marekmarecki3670 3 года назад +2

      @@MrDaveH4 I've sold my FZ6 S2 (great bike) and getting tracer 👍

    • @Amarwa
      @Amarwa 2 года назад +1

      @@marekmarecki3670 will sell my fz6 S2 for a tracer 900 also

  • @wheelie-gonzales
    @wheelie-gonzales 4 года назад

    hi, were did you get the crash cage??

  • @KairyuRider
    @KairyuRider 3 года назад

    Did you notice any change in fuel Economy?

    • @Modelar4ever
      @Modelar4ever  3 года назад +1

      No I did't.

    • @KairyuRider
      @KairyuRider 3 года назад +1

      @@Modelar4ever thanks, that possibly my biggest concern is dusting and doing a slip on. But I’ll keep the cat.
      All the best

  • @steveking4204
    @steveking4204 4 года назад +1

    Could have bought the full system, save yourself a lot of work... and if u sell, just pop the stock one back on.

    • @pejapl13
      @pejapl13 4 года назад +1

      It's either "save yourself a lot of work" or "save yourself a lot of money" Not everyone has £1000 to buy a full system

    • @stevenking6550
      @stevenking6550 4 года назад

      @@pejapl13 1k for a scorpion.. £550 full system..

    • @pejapl13
      @pejapl13 4 года назад

      @@stevenking6550 never said for a scorpion, I meant an Akrapovic, I should have mentioned that

    • @steveking4204
      @steveking4204 4 года назад +1

      @@pejapl13 good grief... the video states and shows a Scorpion... who ever mention Akra... my Akra Titanium cost 718 NEW.. you need to shop around pal.

    • @pejapl13
      @pejapl13 4 года назад

      @@steveking4204 Thats why I said "I SHOULD HAVE MENTIONED THAT'

  • @archico01
    @archico01 3 года назад

    RIP back pressure

  • @roguedrifter6259
    @roguedrifter6259 4 года назад

    Which Scorpion slip-on model was used? Looks and sounds great.

  • @briansheridan7216
    @briansheridan7216 7 месяцев назад

    No eye protection, no hearing protection, no gloves, when he gets injured, it will be someone else's fault.

  • @tomg6284
    @tomg6284 4 месяца назад

    Music so bad had to leave..
    Shit can the music and repost.

  • @Julius.esteve.aqui.32201
    @Julius.esteve.aqui.32201 3 года назад

    Not speak inglsh

  • @letitrest4662
    @letitrest4662 2 года назад

    Narration............. Not techno-shite.