Fix buzzing on an open string // becoming a luthier part 2
HTML-код
- Опубликовано: 10 июл 2024
- I built the guitar in the video from scratch. It was my second build. To see full build videos of both of the guitars I've made, click the links below.
1st build: • Full Guitar Build Vide...
2nd build: • Full guitar build vide...
#lutherie #guitarrepair #guitarbuilder #cmrwoodworks
////////////////////////social links///////////////
My DIY & Cooking channel : goo.gl/QPEUpP
INSTAGRAM : goo.gl/QhsLBT
FACEBOOK: goo.gl/XH4kT5 
Хобби
That paper thing you did was a life saver for my guitar.
did you leave the paper on instead of doing the glue/baking soda thing?
@@deemika im thinking the same thing
That’s really an interesting way to repair the buzzing. So cool.
Exactly what I was looking for! Simple and incredibly effective, thanks for sharing, you ROCK!
Sure thing!
Outta three videos we watched to fix a guitar buzz this one was the only one that worked!
Awesome!
Keep going man. Your are doing great.
Thanks!
well done!
Nice fix
You can use bone dust and super glue as well. I've had to do that before when I did my first nut. Great video.
Thanks! Yeah, one of the videos I saw while researching used bone dust.
I love this hack! Could be a proper trade secret!
Solved my Yamaha guitar’s fret buzz issue.
And it makes sense - i’ve been playing a lot on the guitar since I bought it, replaced many strings, and never thought the nit could actually wear out. Been watching several videos on fret buzz and repairs to it - but this was the most cost effective and easiest repair.
The piece of paper used for fault finding was also awesome & innovative. Learnt a lot in your video. I’d add one mor thing - that the slot being filed should have a slight incline and not be made perfectly parallel with the neck- will keep nuisance breakage of strings at bay and also contribute to even less fret buzz
Thanks for the comment! And the tip!
the guitar sounds real good,,,well done,
Thanks!
I tried this on my buzzing high E string. Complete fix! Buzz eliminated…..THANK YOU!
It’s weird that so many out of the shop guitars have problems with their nuts. I bought and Ibanez recently and it got that problem too, at the open b string. I’ll try that paper trick now.
Thanks for the "paper", it removed the buzzing on the open A of my guitar.👏 I'm afraid to do the "baking soda" thing on my Suhr Modern. Haha. the paper will do. Thanks mate.🙏
Glad it helped!
Wow thanks so much. I tried the paper thing and it works so ima try the soda & superglue this week.
Nice!
I used to put spare string fragments (like a piece of the high e) in the nut of an old strat. I had used a hacksaw to slot it, and went a little too deep.
I was like 12 and the internet was made of trees back then
I put on new strings and my low E buzzes so I'm going to try what you did. Thanks for sharing.
Hope it works out!
did it work?
@@ZEUZ119 Yes it did, thanks.
@@davidclark9086 thank you for letting us know
Thanks, I have one guitar with one string that won't stop buzzing even after someone else took a look, will give it a try
Hope it works out!
thx bravo
Really good! Where is your place?
Great video, I think that I saw the same Dan Earlwine video. I thought I might have to try it on strings 3 & 4 of my second build, but so far managed to avoid it.
It was actually a pretty easy fix. Much easier and less of a hassle than I had drummed up in my mind. Thanks for watching!
I think that the problem with buzzing nut strings may not be the depth of the nut slot, but actually that the nut slot doesn't have a slight upward slope. If the slot is horizontal (or even sloping down - towards the frets), the string will be loose in the slot and vibrate against the bottom of the slot. I had this issue on my recent build and I solved it by just sloping the slot a little. I think you baking soda trick may have done this, but on future builds perhaps try for a slope?
Thanks for the feedback! When I filed the slots, I did try to file them about the same angle as the headstock, but it is likely that I didn’t do it enough since I was also trying to avoid hitting the headstock. What you said absolutely makes sense. I hadn’t thought about what would happen if the slots were too flat. I’ll surely be thinking about that when I file the next nut. Thanks for watching and taking the time to comment! I’m enjoying seeing your progress over on Instagram!
@@CMRWoodworks Thanks Chris. I might ask this question elsewhere - as I think we're both trying to figure it out!
Absolutely, lol
Hi Chris, which nut files are you using? Great vid!
I‘m just using some cheap ones I found on Amazon. They were 20-something for the set, I think. Came with 3 double sided files. They have worked just fine for me.
Those are temporary solutions. The way to fix it permanently is to install a new nut that is properly cut.
I agree. Although it looks daunting, making a new nut is easier than it looks, even from oversize blanks. If he can build a guitar, making a nut should be easy.
I'd just shimmy underneath the nut. Cut a thinner piece of balsa wood to size of the bottom of the nut, glue and then sand down.
I’m just using the paper for now.
Cool guitar.Thank you for this, but I don't think I have the confidence to try it.
Just use super glue. Why do you need baking soda?
I honestly don’t know! I just tried what I’ve seen done by master luthiers and it works.
It hardens the glue faster
Makes a stronger bond than just super glue, i use it to patch holes in bounce houses for my company
White baking soda as a color match, you can also save different colored sawdust to color match and fill in gaps or holes
Also, your grooves are too deep. Half of the string must be OVER the bridge or nut.
You know, I actually just learned that by watching a video earlier in the week. It’s funny I don’t recall ever hearing that anywhere else. Thanks for the reminder! I gotta go back and fix it.