I'm half way to making a grappling rig with some 300lb braid I got from China. Some of the guys around here pull in 4 to 5 hundred leads in a session plus anything else that can be salvaged. Not only are they getting free leads by the hundred but are doing us all a great service in the process.
Hi Graeme/ Mike, Just a short message today if i can manage to keep it short. Ha Ha. Been Sea Fishing last 2 days up Fife coast. Weather been horendous but hey ho still enjoyed it. I met many people also pretty new to this Sport and mentioned your You Tube Videos. Every one of them said that they watch your Channel and all of them were so keen to learn more. We shared what knowledge we have together and everyone i met said they love your Videos. It just shows you that even small Fishing marks up here in Scotland have fans of you both even though their not subscribed. My goodness guys your fan base must be enormous and im not surprised. The best Fishing Channel on the Planet. Hope you are both well and looking forward to Christmas. This is just a wee message of appreciation for all you do. I would love to meet you both one day. My Best Regards. Steve.
Hi Stevie, What a pleasure it is to hear a comment like that! Great to see your out there enjoying it - that's the main part, enjoying fishing! It's also great to see there are TAFishing fans up in Scotland who enjoy the videos! - Mike
Hi , great update thanks. I use wheel balance Lead weights for my molds, a lot of impurities but free unlimited lifetime supply of lead i take from neighborhood garages. Your videos are INSPIRATION keep it coming pls. SAS.
thank you for this video very interesting how you do this, but I have a tip that may be of use to you,, I make my own lead bullets for my gun,, so I melt a lot of lead in one hit,, in your video you "clean off the cr*p" from your melted lead,, and that fine for just a fishing weight,, but if you really wont to make your weight's cast so much easer try this tip out as well,, just before you cast your lead weight add a small knob of bee's wax to your melted lead,, the bee's wax will burst into flame's but just stir it into your melted lead until it stop's burning,, (them scrape the cr*p off your melted lead),, by doing this it will really clean out the "cr*p" that is left in your melted lead so do this often,, then cast your weight's,, what you will get is a really clean and shiny cast weight,, cleaning up your melted lead in bullet casting is a must,, or your just wasting your time casting bullet's!,, any kind of wax will work (up to a point!),, I use a bullet lube in a wax form,, or just bee's wax,, candle wax works as well!,, PS,, how come I cant shoot fish?,, the water stop's my bullet's dead in there track's!
Awsome vid again !!! , talk about catering for us the everyday joe !!! . I really hope you know how much you are appreciated and don't stop doing vids . I am first one to say people like you are the real ones company's should be sponsoring !!! . But on the down side then would it take away the rawness off your vids by having to constantly promote someone ( I don't know that's another debate ) . All I can say is thank you and keep them coming ! . Andy
+Andy Watts Yeah...know exactly what you mean.Would be nice for Mike to get something for all the work that goes in,however any big sponsorship would probably shackle us to their product ramming only,and the Show would lose the cutting edge.All the time we can afford to fund it ourselves we will .It would need a mighty big sponsorship deal to get us to sign up,as we're happy doing what we do at the moment.Its fun,(albeit a load of work) but well worth it for the huge following we have.
+TAFishing I hope that the show goes from strength to strength . My out take is in our day and age when the power of the Internet is key , (if I had a company ) is look at your shows which are quality ! You guys who are quality ! The followers you have quality ! Not to mention the views quality ! . People don't get to see the big sponsored anglers . We get too see you , too see your shows too have you learning people weather it's course game or sea !!!!! . So if see it I'm not just getting you in the sponsorship I'm in fact getting a whole business a market . Not to mention which ever company could bring a T A range of stock out !!! . Of course with royalties etc to yourselfs . The question is could it work ? . And I believe in you guys as I'm sure the other watchers do , so yes it could ! . So I believe one day the big companies will come knocking and I believe with all your dedication you deserve it as much if not more than a lot of others . All the best Andy .
another great video would be very nice if you could do a tutorial video on river float fishing as I'm always beach fishing and wanna know abit about river and Lake fishing
+Cruchies Games&More the channel is fulll with various fishing style including a very nice vid on river float fishing with graeme, was a great help for me
+saskaleb I know he has some really useful videos on float fishing but I would like to see a video on how to tie your gear e.g float and hook also how and where to cast on a windy day or strong current
Graeme do you make your own coarse fishing leads. Is it worth it? Do you think the bright lead colour would spook the fish? I've been thinking about making my own as the Wye is very snaggy and I do lose few leads and feeders. Regards Stewart
+Stewart Duncan I have used nuts and bolts as weights when lake fishing,tying a swivel in,but never made my own coarse fishing weights.Everything sea fishing is heavier which is why I make my own sea leads.I guess you could try pretty much anything for a weight,but its easier in stillwaters than rivers
Hey guys, been a while eh! Do you even remember who i am? Haha, been here for ages and was just curious whether you guys know if you can get small lead moulds? Some that are 2-5oz? Thanks! Barney.
+Barney Richardson Yeah we remember you...It's Barney,and he's ..BAAAAAACK !!! Try a sea fishing shop as they are more likely to stock moulds than freshwater shops.
Haha! Yes!! I have been here watching all your shows still. Just don't comment on every video like i used too aha! Oh okay, next time i go down to the sea or whatever i'll have a better look, thanks :D
+FNMasterChannel Cod,Pollock, Whiting, Skate (too many kinds to list), Smooth hounds, Huss, Sole, Gurnard, Pouting, I caught 20+ mackrel just a week ago, Turbot and Brill
+Apple Flavoured Gameplay They vary but they don't cost too much, the screen itself is just a large sheet of green material - you will need chromakey in your editing software to edit out the 'green' part of the screen.
+Bruce Wayne Probably too light.You want a dense metal.I have used old spark plugs,nuts and bolts as weights when shore fishing.Obviously used as they are,don't try and melt them down !!!
I'm half way to making a grappling rig with some 300lb braid I got from China. Some of the guys around here pull in 4 to 5 hundred leads in a session plus anything else that can be salvaged. Not only are they getting free leads by the hundred but are doing us all a great service in the process.
Classic how to video like the early days. Always love these. Especially as the floods mean no fishing for a while.
That ceiling in your work shop is better than the one in my living room !
Hi Graeme/ Mike,
Just a short message today if i can manage to keep it short. Ha Ha.
Been Sea Fishing last 2 days up Fife coast. Weather been horendous but hey ho still enjoyed it.
I met many people also pretty new to this Sport and mentioned your You Tube Videos.
Every one of them said that they watch your Channel and all of them were so keen to learn more. We shared what knowledge we have together and everyone i met said they love your Videos.
It just shows you that even small Fishing marks up here in Scotland have fans of you both even though their not subscribed.
My goodness guys your fan base must be enormous and im not surprised. The best Fishing Channel on the Planet.
Hope you are both well and looking forward to Christmas.
This is just a wee message of appreciation for all you do. I would love to meet you both one day.
My Best Regards.
Steve.
Hi Stevie,
What a pleasure it is to hear a comment like that! Great to see your out there enjoying it - that's the main part, enjoying fishing! It's also great to see there are TAFishing fans up in Scotland who enjoy the videos! - Mike
TAFishing Thanks Mike. Your both very special people in my book.
Steve.
Hi , great update thanks. I use wheel balance Lead weights for my molds, a lot of impurities but free unlimited lifetime supply of lead i take from neighborhood garages. Your videos are INSPIRATION keep it coming pls. SAS.
Good video as always Graeme
Great video!
Where can I get molds for breakaway surf sinkers. They don't seem to sell them here in the states.
thank you for this video very interesting how you do this, but I have a tip that may be of use to you,, I make my own lead bullets for my gun,, so I melt a lot of lead in one hit,, in your video you "clean off the cr*p" from your melted lead,, and that fine for just a fishing weight,, but if you really wont to make your weight's cast so much easer try this tip out as well,, just before you cast your lead weight add a small knob of bee's wax to your melted lead,, the bee's wax will burst into flame's but just stir it into your melted lead until it stop's burning,, (them scrape the cr*p off your melted lead),, by doing this it will really clean out the "cr*p" that is left in your melted lead so do this often,, then cast your weight's,, what you will get is a really clean and shiny cast weight,, cleaning up your melted lead in bullet casting is a must,, or your just wasting your time casting bullet's!,, any kind of wax will work (up to a point!),, I use a bullet lube in a wax form,, or just bee's wax,, candle wax works as well!,,
PS,, how come I cant shoot fish?,, the water stop's my bullet's dead in there track's!
For the grip weight or claw weight. How do you get the holes in the mold case to put wires in? Very unique
Some mold cases already come with the wire slot drilled in them.
@@TAFishing any website/ reference I can find them?
Top man great leads
Awsome vid again !!! , talk about catering for us the everyday joe !!! . I really hope you know how much you are appreciated and don't stop doing vids . I am first one to say people like you are the real ones company's should be sponsoring !!! . But on the down side then would it take away the rawness off your vids by having to constantly promote someone ( I don't know that's another debate ) . All I can say is thank you and keep them coming ! . Andy
+Andy Watts Yeah...know exactly what you mean.Would be nice for Mike to get something for all the work that goes in,however any big sponsorship would probably shackle us to their product ramming only,and the Show would lose the cutting edge.All the time we can afford to fund it ourselves we will .It would need a mighty big sponsorship deal to get us to sign up,as we're happy doing what we do at the moment.Its fun,(albeit a load of work) but well worth it for the huge following we have.
+TAFishing I hope that the show goes from strength to strength . My out take is in our day and age when the power of the Internet is key , (if I had a company ) is look at your shows which are quality ! You guys who are quality ! The followers you have quality ! Not to mention the views quality ! . People don't get to see the big sponsored anglers . We get too see you , too see your shows too have you learning people weather it's course game or sea !!!!! . So if see it I'm not just getting you in the sponsorship I'm in fact getting a whole business a market . Not to mention which ever company could bring a T A range of stock out !!! . Of course with royalties etc to yourselfs . The question is could it work ? . And I believe in you guys as I'm sure the other watchers do , so yes it could ! . So I believe one day the big companies will come knocking and I believe with all your dedication you deserve it as much if not more than a lot of others . All the best Andy .
another great video would be very nice if you could do a tutorial video on river float fishing as I'm always beach fishing and wanna know abit about river and Lake fishing
+Cruchies Games&More the channel is fulll with various fishing style including a very nice vid on river float fishing with graeme, was a great help for me
+saskaleb I know he has some really useful videos on float fishing but I would like to see a video on how to tie your gear e.g float and hook also how and where to cast on a windy day or strong current
On the river mersey we have to use big gripper leads
you should visit flaxlands fishery its great you can catch carp all day long!
Thanks for the vid :)
Great vid do you know any good carp vid and stay awesome 😄
Graeme do you make your own coarse fishing leads. Is it worth it? Do you think the bright lead colour would spook the fish? I've been thinking about making my own as the Wye is very snaggy and I do lose few leads and feeders. Regards Stewart
+Stewart Duncan I have used nuts and bolts as weights when lake fishing,tying a swivel in,but never made my own coarse fishing weights.Everything sea fishing is heavier which is why I make my own sea leads.I guess you could try pretty much anything for a weight,but its easier in stillwaters than rivers
You can use spark plugs for rock fishing ;)
arcanekrusader right on, I've used them in the past myself
Hey guys, been a while eh! Do you even remember who i am? Haha, been here for ages and was just curious whether you guys know if you can get small lead moulds? Some that are 2-5oz? Thanks! Barney.
+Barney Richardson Yeah we remember you...It's Barney,and he's ..BAAAAAACK !!! Try a sea fishing shop as they are more likely to stock moulds than freshwater shops.
Haha! Yes!! I have been here watching all your shows still. Just don't comment on every video like i used too aha! Oh okay, next time i go down to the sea or whatever i'll have a better look, thanks :D
Greamy show the fishing trophys and books ,on the walls
Have you got a link where I can buy them grip sinker? Or even how to make that mould
Just try local tackle shops,they should be able to source them.
@@TAFishing they don’t have them in Australia most of them are from overseas
hi. where do you buy those moulds?
Try ordering at your local tackle shop.They may have a catalogue.
is it possible to make impact leads??
I guess,but I have never tried.Maybe someone else has some tips
is this just a updated version of the old video about melting lead?
+FNMasterChannel No, Graeme makes a different type of grip lead to the other ones that he has made, watch it to find out what he does- Mike
TAFishing What fish are active in the winter to fish in the UK seas?
+FNMasterChannel Cod and Whiting
+FNMasterChannel Cod,Pollock, Whiting, Skate (too many kinds to list), Smooth hounds, Huss, Sole, Gurnard, Pouting, I caught 20+ mackrel just a week ago, Turbot and Brill
David Storton have you caught horse mackerel?
How much is a greenscreen I might get one
+Apple Flavoured Gameplay They vary but they don't cost too much, the screen itself is just a large sheet of green material - you will need chromakey in your editing software to edit out the 'green' part of the screen.
+TAFishing hi Mike, i frankly liked better the intros shot in the pool room, maybe a question of habits :)
Graeme has turned into one of the Teenage Mutant Ninja Turtles lol
Take a spoon and an old dish and scoop the bad stuff in the disn
could I use aluminum?
+Bruce Wayne
Probably too light.You want a dense metal.I have used old spark plugs,nuts and bolts as weights when shore fishing.Obviously used as they are,don't try and melt them down !!!
First