No need to disassemble the gear for that leak. The input seal is easily changed on the truck. The torsion bar o-ring that leaks in then worm shaft is also easy. JB weld the end of the input shaft closed. It’s a TRW approved repair.
Great video. Mine is leaking from the top of the input shaft. Can the harbor freight o ring be replaced without removing steering box from truck? There are no other leaks. Thanks!
@dubba85 can one really arc weld just the very tip in the center? Mine leaks from there and I have JB welded it and even melted plastic into it. It holds for a month then leaks again.
I hoping to see a rebuild.. what the heck.. You could have shown the video as you were taking it apart so it could show the Good, the bad and the ugly. Then showing to put it back together..
You have to buy tool J-37464. You can Google it and purchase it online. Also Google " TRW Steering Gear Service Manual " and it will tell you with diagrams how to take worm gear out the top of steering gear. I used the tool, but using a ratchet wrench to pull was too hard so I used a hammer to tap the end of the tool counter clockwise and it loosend . I was very happy. Take the appropriate size punch to tap out pin, have to tap really hard and it will slowly come out. Be safe, all the best.
Also when you get the pin out, remember the orientation of the shaft before pulling it out. There is a single ball in it that will fall out so pull shaft out in a container. That ball can only fit in the hole with the slot above it
The Warrior i guess that it is the part that is held together with the pin, that you say not to take apart. The o ring you sanded down. Anyway thanks for the fast reply. I appreciate it and the video man!
turboryan hello, if it’s leaking out the tip top of the steering gear then you must knock out the pin in the neck and replace that o ring. It’s not in the seal kit but it’s at harbor freight tool in the seal kits they have. Good luck and thanks.
Great video! The shaft that the pitman arm connects to is called the sector shaft btw.
Thanks for the reply.
Sorry it took so long.
Keep up the good work!
No need to disassemble the gear for that leak. The input seal is easily changed on the truck. The torsion bar o-ring that leaks in then worm shaft is also easy. JB weld the end of the input shaft closed. It’s a TRW approved repair.
Really? I hv jb welded and still leaks at tip.
Can the tip be welded as well?
@@halfmoon5022 yes some people weld it off. That works better actually and you’ll be good forever. 👌👌
@jayebzzz338 Ok. I will weld it tomorrow. Thank you.
@@jayebzzz338 I welded it up. No more leak! Disconnected the batteries naturally, then sanded it down a bit with sand paper just to clean it up.
No you can’t, it has to all come apart. Sorry but I know it seems easy but it’s not. Good luck brother.
If having issues steering could this be a sign that a rebuild is needed?
Great video.
Mine is leaking from the top of the input shaft. Can the harbor freight o ring be replaced without removing steering box from truck? There are no other leaks. Thanks!
Brian Salty , I don’t think you can. I found it to be easier to take it off first. Thanks for the comment, glad I could help.
I've welded several up so they will never leak I feel bad for who ever has to rebuild them in the future
@dubba85 can one really arc weld just the very tip in the center? Mine leaks from there and I have JB welded it and even melted plastic into it. It holds for a month then leaks again.
Hello! Please tell me, why there is an oil leak between the central rod and the splined sleeve? freightliner cascadia dd15.
Sounds like you have a bad O-Ring.
I hoping to see a rebuild.. what the heck.. You could have shown the video as you were taking it apart so it could show the Good, the bad and the ugly. Then showing to put it back together..
It just magically got put together but no idea how. SMH
How did you get the steering shaft off the top cap you didn't show us
There is a pin that holds it in. Have to take a small punch and knock it out. Hopefully I’m answering your question.
Tengo una caja de internacional, se le puede cambiar solo el retenedor de el eje de entrada sin desarmar ???
i have mine leak from the valve housing. any idea why?
My gear box leaking around were the four bolts are. Is it a o-ring or a gasket I need to replace?
Kenji Smith , o ring there. Thanks for watching.
Can I just remove the top without taking the whole gear box off?
Kenji Smith no you can’t, I has to all come apart. Sorry but it seems easy but it Like a puzzle. All O,rings.
Que se explique en español
Yo no hablo espanol.
How do you get the worm gear out of that top housing
Never mind i see the pin.
Got the pin out, still cant get the top housing around the splines.
You have to buy tool J-37464. You can Google it and purchase it online. Also Google " TRW Steering Gear Service Manual " and it will tell you with diagrams how to take worm gear out the top of steering gear. I used the tool, but using a ratchet wrench to pull was too hard so I used a hammer to tap the end of the tool counter clockwise and it loosend . I was very happy. Take the appropriate size punch to tap out pin, have to tap really hard and it will slowly come out. Be safe, all the best.
Also when you get the pin out, remember the orientation of the shaft before pulling it out. There is a single ball in it that will fall out so pull shaft out in a container. That ball can only fit in the hole with the slot above it
I have a similar box... and it's leaking from the center of the input shaft... What seal is in there?
It’s a o ring, I had to get it from harbor freight. In a o ring kit.
The Warrior i guess that it is the part that is held together with the pin, that you say not to take apart. The o ring you sanded down. Anyway thanks for the fast reply. I appreciate it and the video man!
turboryan hello, if it’s leaking out the tip top of the steering gear then you must knock out the pin in the neck and replace that o ring. It’s not in the seal kit but it’s at harbor freight tool in the seal kits they have. Good luck and thanks.
I wonder if it worked?
DePuncakes it did. I was successful.
THAT NOT REBULIT,
Come on dude this videos whack you should’ve showed as you break down the gear box
Tu video no me ayudó en nada