@@Darkness_295 TN High court directed Tamilnadu govt to close the ghat during night time from today onwards inorder to prevent the death of wild animals
The tyre burst because owner of vehicle was using Remoulded tyres and not cold remould it looks like hot remould tyre and that to on left rear side. If you want to use remould tyres in the rear part use it on rear right side, then you will be successful or you will always have tyre bursting and driver will get frustrated and not drive this vehicle.
I imagine the issue is not the side but the drive axle. For every turn that the driver reverses the wheel outside the turn slips and heats up the tire. The best tires should be used on the traction wheels, I think.
@@marcelinhom.1401 Exactly my point so when he reverses the tyres bearing the load at the rear need to be LUG tyres and if you observe all long distance vehicles in India have best set of tyres on the rear left side due to the load factor as well as the left side has to go off the road when the road is narrow as in India we have right hand drive. So had the tyres been new he would not have been in this mess and the tyres even though would have slipped wouldn't have burst.
Drive shaft should be put added to the last axle as well and differntial lock also should be included in these tin can trucks. And instead of a 4 wheeled back axle, they should have a 2 wheeled axle with turnable rear axle like Scania and Volvo multi axle bus. That would help the drivers a lot in this country. Will India implement this? Absolutely not. All money and common sense is lost in corruption
Drive shaft should be put added to the last axle as well and differntial lock also should be included in these tin can trucks. And instead of a 4 wheeled back axle, they should have a 2 wheeled axle with turnable rear axle like Scania and Volvo multi axle bus. That would help the drivers a lot in this country. Will India implement this? Absolutely not. All money and common sense is lost in corruption
What an idiotic way to allow 12 wheelers on hills... They aren't meant for bumpy inclined roads. They should instead load into 6 wheelers with 2 axles. Or if that's hard to implement at least provide the drive shaft to the last axle and have differential lock. What a stupid nation we live in. Truck drivers suffer the most in India's dumb governance.
The tires got too hot at the beginning of the video and also due to the excess load the tire must have burst later.
Today onwards evening 6.pm to morning 6.am..all vehicles have no permission to travel in this road
@@Darkness_295 TN High court directed Tamilnadu govt to close the ghat during night time from today onwards inorder to prevent the death of wild animals
The tyre burst because owner of vehicle was using Remoulded tyres and not cold remould it looks like hot remould tyre and that to on left rear side. If you want to use remould tyres in the rear part use it on rear right side, then you will be successful or you will always have tyre bursting and driver will get frustrated and not drive this vehicle.
I imagine the issue is not the side but the drive axle. For every turn that the driver reverses the wheel outside the turn slips and heats up the tire. The best tires should be used on the traction wheels, I think.
@@marcelinhom.1401 Exactly my point so when he reverses the tyres bearing the load at the rear need to be LUG tyres and if you observe all long distance vehicles in India have best set of tyres on the rear left side due to the load factor as well as the left side has to go off the road when the road is narrow as in India we have right hand drive. So had the tyres been new he would not have been in this mess and the tyres even though would have slipped wouldn't have burst.
Drive shaft should be put added to the last axle as well and differntial lock also should be included in these tin can trucks. And instead of a 4 wheeled back axle, they should have a 2 wheeled axle with turnable rear axle like Scania and Volvo multi axle bus. That would help the drivers a lot in this country. Will India implement this? Absolutely not. All money and common sense is lost in corruption
Drive shaft should be put added to the last axle as well and differntial lock also should be included in these tin can trucks. And instead of a 4 wheeled back axle, they should have a 2 wheeled axle with turnable rear axle like Scania and Volvo multi axle bus. That would help the drivers a lot in this country. Will India implement this? Absolutely not. All money and common sense is lost in corruption
,i am first
See nobody cares
@@urimai_kural Brother, then why do you respond!
This comment "I am first" you should tell after writing your exams. At least keep your parents happy jerk
What an idiotic way to allow 12 wheelers on hills... They aren't meant for bumpy inclined roads. They should instead load into 6 wheelers with 2 axles. Or if that's hard to implement at least provide the drive shaft to the last axle and have differential lock. What a stupid nation we live in. Truck drivers suffer the most in India's dumb governance.
No use ts timing rules