I have the WC88 and run it with my M7060 and I have nothing but good things to say about it too. I think they are the best made and best value on the market. Get you and dump trailer to go with it and you will like it even more!
I have a shell on my pickup. Line the bed with low cost poly tarp up to 6 inches above how high you want to fill it with chips. (duct tape to hold it) Tailgate shut and rear window open, aim the chipper in. You can fill the bed and most of the volume of the shell. To empty, drop the tailgate and pull the tarp out, pulling the tarp forward as it comes below the tailgate. If you do it often enough you can rig eye-bolts so you can pull the tarp in fast using paracord.
I own the same model and I’d highly recommend it. If you’re looking for a chipper do not buy one unless it has a hydraulic feed. It makes using one of these far less work.
correct, I have checked them a few times, and do not see a reason to flip them yet....I think as long as you do not get any rocks or grit in there in error you would have same experience
no not at all. Its a bit long for tight turns as it swings so just be mindful of that through the trees, but you can also fold the hopper in to make it shorter. No issue with weight, but I do have the front loader on at all times.....
That's wrong! The WC 46 can Take Up to 4" And the WC68 can Take Up to 6". There are other people who already proved it. In this Video the small tractor is limiting the Shipper. For 6 Inch logs you should have atleast a 50 HP tractor with Not less than 40 HP on the PTO
100% wrong, my 1025r 25 HP 18 at the PTO will cut 6" hardwood all day long without even a slight bog (just set the infeed speed properly) problem is the 3 point can barely lift it! Got to go an give it a 2 finger help to get it up! 40 HP LMFAO!
@@BaconRanch land pride and vermeers comes in orange,green,blue ,red,yellow and other different colors option to match the tractors wich like about land pride and vermeers
it is not meant to match anything, it is meant to be camo in the woods the color is GREAT who wants to look at a ugly bright green or orange or worse yellow item sitting in the yard!
Thanks for posting. Fedex actually delivered my WC68 about an hour ago and it's going to be a game changer on the property.
I have the same chipper and absolutely love it! I am more than happy with it, no complaints. EXCEEDS ALL MY EXPECTATIONS 👍
I have the WC88 and run it with my M7060 and I have nothing but good things to say about it too. I think they are the best made and best value on the market. Get you and dump trailer to go with it and you will like it even more!
I have a shell on my pickup.
Line the bed with low cost poly tarp up to 6 inches above how high you want to fill it with chips. (duct tape to hold it)
Tailgate shut and rear window open, aim the chipper in.
You can fill the bed and most of the volume of the shell.
To empty, drop the tailgate and pull the tarp out, pulling the tarp forward as it comes below the tailgate.
If you do it often enough you can rig eye-bolts so you can pull the tarp in fast using paracord.
I own the same model and I’d highly recommend it. If you’re looking for a chipper do not buy one unless it has a hydraulic feed. It makes using one of these far less work.
Beautiful trail and land ... Lush hardwood leaves.
thanks, we love it!
For those considering this chipper it would have been nice to see the process / sequence of attaching it to the tractor.
Good vid nice property
Nice one Mark.
Only problem I have owning the wc68 is that I run out of trees and debris.😅
This is true! Its a great machine!
So you say you did 500 yards of chips and never rotated the blades?
correct, I have checked them a few times, and do not see a reason to flip them yet....I think as long as you do not get any rocks or grit in there in error you would have same experience
Do you find this chipper to much weight for your Kubota b2650?I have the same tractor with the cab
no not at all. Its a bit long for tight turns as it swings so just be mindful of that through the trees, but you can also fold the hopper in to make it shorter. No issue with weight, but I do have the front loader on at all times.....
What was the shocking surprise?
click bait title tbh, but in hindsight I suppose that the blades do not need sharpening - yet.
What size logs will it take?
been a few months as its winter here, from what I recall max diameter is a healthy 4 inch
That's wrong! The WC 46 can Take Up to 4"
And the WC68 can Take Up to 6". There are other people who already proved it.
In this Video the small tractor is limiting the Shipper. For 6 Inch logs you should have atleast a 50 HP tractor with Not less than 40 HP on the PTO
100% wrong, my 1025r 25 HP 18 at the PTO will cut 6" hardwood all day long without even a slight bog (just set the infeed speed properly) problem is the 3 point can barely lift it! Got to go an give it a 2 finger help to get it up! 40 HP LMFAO!
nice if it was kubota orange match the tractor like the land pride ones
I agree, can not stand green and having multi color machines!
@@BaconRanch land pride and vermeers comes in orange,green,blue ,red,yellow and other different colors option to match the tractors wich like about land pride and vermeers
it is not meant to match anything, it is meant to be camo in the woods the color is GREAT who wants to look at a ugly bright green or orange or worse yellow item sitting in the yard!
@@BaconRanch if you mean because you hate John Deere you have bigger issues. LMFAO!