@gadget addict i was thingking the same thing. and i'm also surprise that you are here too. i regularly watched your vid on facebook. i'm from PH by the way :D
I love the fact that you include trial by error bits to your videos. It's an honest representation that achieving anything worthwhile in life comes through learning and being prepared to make mistakes.
I gotta say, the cinematography on the final reveal of this project, is by a country mile, the best of all the video's I've seen thus far! Very cool man :)
I cannot stress enough how true this is for me as well!! Very effective reveal due to the great production value and the troublesome journey towards the final result. The video editing and composition are of the same craftsmanship as the shown content. I am hooked by this video and already conditioned myself to get shivers only by hearing the reveal soundtrack. Really pleasing experience!
That bending of the side panels is so subtle and precise. It's amazing what you achieved with BRASS at home, without industrial presses and ovens. Hats off.
Omg....I'm speechless. I love the look of this playstation it looks so high-end all of your dimensions and specifications in order to make everything the same size and to fit right in to place love it great work
@@adityacrobat There would likely be no difference as the brass isn't in contact with any heatsinks. It's like sticking some aluminium on the back of a laptop and then expecting better cooling, you'd get better cooling from just removing the side panel.
Looks absolutely amazing. My only concern would be thermals/heat dissipation. Would love to see some thermal testing done on this. I feel like it may hold the heat, but I'm no expert when it comes to thermals within different metals.
I would imagine you would get better heat disbursement as the brass will heat up more evenly allowing a wider area to dissipate the heat off. That’s why on expensive cars you will see the header/exhaust manifold wrapped in gold foil.
Brass is mostly copper and used specifically for thermal conductivity :) Even a lot of your steel pots and pans have a layer of copper in the bottom to help evenly spread out the heat along the surface.
Honestly, I was expecting a brass vinyl wrap for most of this with some brass accents. I did not expect that... Holy crap. Seriously impressive. You have my respect for sure!
@@taza99 Ice, because it's the "polar" opposite! Okay sorry bad joke, but ice would keep it nice and cool (if you ignore the fact that it would kill the board :P)
Very unlikely. Guy can put this together from scratch do you really think he even needs to bring it in? On top he already voided the warrantee by opening it.
@@AllenHanPR actually opening a product doesn’t void the warranty unless you’re the one that broke the part. Most people wouldn’t actually have the time or money to actually fight them on that and that’s why they still use warranty void if broken stickers
@@AngelGonzalez-rs9fs Warranties these days don't even cover electronics like laptops without opening or voiding it. A fragile screen suddenly looking like a cracked screen when powered on a month after purchase means you can pay them about $450 plus shipping to have it repaired or use an external monitor.
Lol I actually loved the sponsor part. Kiwi Co is 100% worth my time. Setting up kids to be future innovators is always interesting and important in my opinion.
I think this is the first time I've seen you document the failures that you face in your process - for long, I thought you dream up random things and make it perfectly first time around. You are human after all.
Yeah i actually like that the failures are shown, because there's a lot to learn from them, like how the centre became a hotspot and burnt through the mdf
You know its wild. Videos from this channel will pop up on my recommends and even if I see the video title and think "why?" By the time the first minute has passed I'm like "well it is interesting though..." Easily one of the most original channels on this platform. Never change man.
I think someone needs to confiscate this dudes brass, before he can make a brass exoskeleton to become his final form, Brass Man and trys to terraform the planet until everything is nothing but brass.
Definitely a stunning console matt. I got put on to you by a friend who showed me a video of the one you completely transformed into something that not only looked beautiful but looked like an item of furniture. Top marks to you mate 👌👍🏼👍🏼
LTT makes a Gold Controller using Super expensive equipment and a team of professionals.... DIY Perks makes a brass PS5 himself with a Jigsaw and a Blowtorch.... Awesome work!
@@PandaMane BUT they could've cast gold OR gold plated instead of making it solid gold. The point is, LTT did it for being flashy, DIY Perks did it because he probably had brass laying around and to make it look better and suit his general workspace theme
Damn, imagine his grandkids walking up into his house's attic and seeing a beautifully patinated ps5 just hanging out among all the other cool stuff. Chef's Kiss 👌
@@hrodvithit Thought that too, put when you think about it, you really have no need to touch it. If you want to press the startup button you can use a pen to press it.
@Hashir Easa Well, Hi, can we please ignore those silly mistakes on social media from unknown strangers and just understand their perspectives for a better view? Thanks, have a great day. ❤️
I think staining or giving the center cover some colour would make it even more better ( kind of like how titanium items can have a purple/blue/pink kind of colour by heating or some chemicals).
As I said it in your "4K home cinema" video, this was marvelous. The editing, the way it was narrated, the ideas you came up with, everithing. This video make me feel incredible, i don´t know if it was motivacion, fascination, but it was awesome. You have so much talent man, I´m glad I know your channel. Until your next video, bye!.
@@UNIX32 You never know with corps like Sony. They might try to spin it as him making money off of a video telling others how to do this, not making matters better by his channel name being "Do it yourself perks". But lets hope not!
Dude, I LOVE that he's such a genius and shows himself messing up the process over and over, its so refreshing and humanizing and just all around the basis of why i think this guy has the best youtube channel on the platform.
This man's videos has popped up on my feed several time. And this video has caused me to subscribe. He has the soft soothing voice of the documentary commentators and the DIY skills that I want to learn!
This is absolutely unbelievable!!! My mind is blown 🤯🤯🤯 I feel like a jerk suggesting you punch the PlayStation logo on it though I have no doubt you have the skill/ability to do it!!!
I know this is a little after the fact (just recently found your channel and I'm binging the videos lol) but I'd love to see this PS5 with some internal LEDs! I think having that glow coming out of the gaps between the brass would look really pretty.
I thought he was going to say at the beginning: "It after all is just plastic, and feels mass produced. Which, is a surprise because nobody can get their hands on one"
My friend bought one from Swedish cdon right before Christmas and got it not long after when they all where sold out everywhere else I got my series x at the same place. Just don't give up took us about 3h each day for 2 days of searching
I feel like it would’ve been easier to cast a mould from the original parts and then melt the metal to liquid and pour it into casts. Then clean the plates up by sanding down any spills or errors.
@@logan2906 Are you stupid? Brass will help conduct heat _away_ from the circuitry - the insulating properties of plastic are far worse for cooling. By your logic all of Apple's aluminum-cased electronics should be frying themselves in droves.
Brother Matt , I must say you've got a very special and positive energy about you man. Really likable , can feel your personality through the video. This craftsmanship is actually amazing . This video and your recent one of the wood x Carbon fiber PS5 are just insane bro. I'd love to pay you to come and customize my PS5 too haha. I'm in the UK . Godspeed
@@trevorandrew8726 which is why you'd move the drive. By extending the internal ribbon cables you could route the drive somewhere totally different like a slim pedestal base or even as an external unit you could hide away. Then slap on the symmetrical panels from the digital edition and you're off to a winner. I may even try it myself when the next revision comes out and you can grab these units for cheap.
i swear, your level of commitment is off the charts..... brass is HARD to deal with, and you pulled it off perfectly. even after what seemed like one disaster after another. amazing job!!
The BBC need to pick up a show for Matt to demonstrate his phenomenal abilities. “All the Perks.” BBC, there’s your working title, let’s commission it.
They wouldn't do it, because it encourages you do 'do it yourself', which means not buy mass produced shit, hurting big business, so it would be 'left wing'. Shame really as it could be fun....
@@Merahki3863 maybe if it were 2005, id argue the fact that he wouldnt be cancelled based on ratings is the most stable, id also argue a better way for him to expose himself to different audiences is to do collabs on youtube, how awesome would that be, but yes im all for any way for our guy to get some shine 🙌
@@ibrahimeditz4692 Mate, I am not being rude. Most of what Matt does is crazy and he pulls it off every time. He is a genius! A mad Emmett Brown style genius!
And DIY Perks still manages to make slicker and better thought-out stuff than Linus' team. That's what happens when you don't make your videos on a conveyor belt.
Matt, you're taking brass to a whole new level. Soldering those stand-offs on to mount the side panels was brilliant. Keep killing it! - Brad
Cool seeing you here brad since im a fan of both channels
How does this only have 1 other reply
Another reply
@@foreverstream nothing really needs to be said
CAN U GIMME A SHOUTOUTTTTTTTTTTTTTTTTTT
Literally the best recommendation the RUclips algorithm has ever given to me, this guy’s video production and skill is incredible!
yooo watch his pc table video it's really good
it's called "building an invisible pc"
Same xD
Yaaah bruh, RUclips algorithm usually blows. Fund this guy like a week a go, and I agree, this is the best
LTT with the gold Xbox controller and now you're bringing us the brass PS5 👍
Both are a little crazy but the process is great to watch.
Unlike the gold controller though, this project could actually be attempted by us mere paesants :)
@@patrik5123 the Golden controller also comes with serious issues when it comes to usability. This widely avoids such issues.
what's next, titanium nintendo switch?
I was thinking of diamond, but ill keep it in the metal elements
it actually looks crap, i much prefer the original design.
@gadget addict i was thingking the same thing. and i'm also surprise that you are here too. i regularly watched your vid on facebook. i'm from PH by the way :D
I love the fact that you include trial by error bits to your videos. It's an honest representation that achieving anything worthwhile in life comes through learning and being prepared to make mistakes.
Well he filmed it and it increases the watch time so might as well not waste it
@@VRTX-lh5qzit doesn’t increase watch time at all, put some though into why and come back to me
This guys voice us so calming. He sounds like a documentary commentator
That’s what I was thinking
Yeah, but the kind that isn't boring. This documentary is the kind that you are able to keep 100% attention on.
How its made
@@laomd exactly. That is why it felt very nostalgic.
Ikr
As an engineer and fabricator who retrained to become an undertaker 15 years ago this video gets my engineering blood pumping and makes me smile
Bro I feel ya
@@philmoregain I was about to make the same joke lol
I love it that you included the messed up parts, makes the process SOO much more relatable.
Please always do that going forward, whenever possible.
I gotta say, the cinematography on the final reveal of this project, is by a country mile, the best of all the video's I've seen thus far! Very cool man :)
I cannot stress enough how true this is for me as well!! Very effective reveal due to the great production value and the troublesome journey towards the final result. The video editing and composition are of the same craftsmanship as the shown content.
I am hooked by this video and already conditioned myself to get shivers only by hearing the reveal soundtrack. Really pleasing experience!
The youtuber nobody can hate. What a brilliant person.
Agreed!!
Well you can definitely hate how creative and talented he is
And yet, at the moment of this comment, this video has 530 thumbs down.
Sony disagreed. :(
I like his projects. But i don't like his artificial overly nice personality. If everything is amazing, nothing is amazing
Wow, amazing craftsmanship!
Aye Hugh jeffreys love ur vids
I agree
Yessir
Ooof these 2 tech channels are very lit
This is a Hugh Jeffrey's comment.
That bending of the side panels is so subtle and precise. It's amazing what you achieved with BRASS at home, without industrial presses and ovens. Hats off.
Hi Mikeius:)
Sheeesh
Absolutely beautiful work he has done but tbh brass is not steel it can be bended better with hand than machine
Omg....I'm speechless. I love the look of this playstation it looks so high-end all of your dimensions and specifications in order to make everything the same size and to fit right in to place love it great work
That looks absolutely spectacular, definitely a show piece for years to come! How are the thermals? :P
It would definitely be better, as brass is a better heat conductor than plastic.
I suppose brass conducts and spreads heat much better than plastic...
*_Omg moment 👍❤️_*
@@adityacrobat There would likely be no difference as the brass isn't in contact with any heatsinks. It's like sticking some aluminium on the back of a laptop and then expecting better cooling, you'd get better cooling from just removing the side panel.
@@Varangian_af_Scaniae probably better than you can leech subscribers by being an ass
Props for showing your failures and struggles. So many channels keep that stuff hidden.
I love how he explains how he does everything, like we're gonna do this
believe it or not there are people who can follow what he’s saying. Crazy, I know.
The most crazy thing is he actually got a ps5
He didn't explain how to take the wifi antenna outside.
@@fatkid5600 yaass 😂😂
He's got me seriously considering it 😂. I'd love to do it in aluminum tho.
Looks absolutely amazing. My only concern would be thermals/heat dissipation. Would love to see some thermal testing done on this. I feel like it may hold the heat, but I'm no expert when it comes to thermals within different metals.
I would imagine you would get better heat disbursement as the brass will heat up more evenly allowing a wider area to dissipate the heat off. That’s why on expensive cars you will see the header/exhaust manifold wrapped in gold foil.
It would actually dissipate heat better than plastic..
@@kt_gam1ng347 that makes sense. I just kind of figured it would hold it in more. Like I mentioned I know nothing about thermals lol 😆
the brass (metal) would act like a giant heat sink, unlike plastic which has nearly no heat dissipation properties.
Brass is mostly copper and used specifically for thermal conductivity :)
Even a lot of your steel pots and pans have a layer of copper in the bottom to help evenly spread out the heat along the surface.
Honestly, I was expecting a brass vinyl wrap for most of this with some brass accents. I did not expect that...
Holy crap.
Seriously impressive. You have my respect for sure!
dude... I liked the video immediately and yes I would love to see what the polar opposite of this looks like! Can't wait 😉
Same dude!
Concrete?
@@taza99 Ice, because it's the "polar" opposite! Okay sorry bad joke, but ice would keep it nice and cool (if you ignore the fact that it would kill the board :P)
@@WillFaustCuber the board would be hydrated though
Vantablack or Black 3.0?
I've loved literally every project you've ever done, but this is just INCREDIBLE. Job well done man!
I love how he always has the calmest voice I have ever heard, no matter how big of a mess he makes or how sideways things can go.
"It feels mass produced, which isn't a surprise because it is"
*checks stock* Not so sure about that.
this shti made me laugh
Still millions were produced
mass production and over sale aren't same thing, they made millions, but didn't sold nearly as much
@@normanpang9376 no actually only 17 were ever made
They definitely mass produce the shell, its just the parts inside that are hard to get bc of silicon shortages
The amount of dedication this guy has is amazing it’s actually inspiring in a way he made a lot of mistakes but always finds a way to fix it
@Aditya Agarwal *is supposed to do*
@@MufarowasheMadzimure gau
@@hashthehaunter1197 ?
@@MufarowasheMadzimure gay
@@hashthehaunter1197 how am I gay?
Sony's service is going to flip out when this thing comes in for warranty
Very unlikely. Guy can put this together from scratch do you really think he even needs to bring it in? On top he already voided the warrantee by opening it.
@@AllenHanPR actually opening a product doesn’t void the warranty unless you’re the one that broke the part. Most people wouldn’t actually have the time or money to actually fight them on that and that’s why they still use warranty void if broken stickers
@@AngelGonzalez-rs9fs Warranties these days don't even cover electronics like laptops without opening or voiding it. A fragile screen suddenly looking like a cracked screen when powered on a month after purchase means you can pay them about $450 plus shipping to have it repaired or use an external monitor.
who cares, the money he will make from this video, he can buy 10 replacements.
The true beauty of this metal can not be catched by the eye of an camera, but this is some serious precious art you have created!
You know a channel is god-tier quality when you don't even skip the sponsored part.
Lol I actually loved the sponsor part. Kiwi Co is 100% worth my time. Setting up kids to be future innovators is always interesting and important in my opinion.
that toy was really interesting, specially cause you can buy more things than it shows
you know the channel is a bad-tier quality when you skip most of the video just to see a "high-end PlayStation 5" covered in brass
i skipped it right away because I've seen the kiwico ads waaayyy too many times
Meanwhile I used SponsorBlock.
I think this is the first time I've seen you document the failures that you face in your process - for long, I thought you dream up random things and make it perfectly first time around. You are human after all.
Yeah i actually like that the failures are shown, because there's a lot to learn from them, like how the centre became a hotspot and burnt through the mdf
You know its wild. Videos from this channel will pop up on my recommends and even if I see the video title and think "why?" By the time the first minute has passed I'm like "well it is interesting though..." Easily one of the most original channels on this platform. Never change man.
Wow… it looks really nice. Stunning PS5👍🏻🤤
This is a beautiful work, you are amazing! 🔥🔥🔥
just like u ;)
@@Wcocoon did you just flirt with an actual company 💀
@@bryanespino6882 yes he did and he’s proud
@@thechickenofdoom5837 let him bombard his proudness. He actually flirted with a company
@@Wcocoon U and ur 5 likes weird bruh
Linus: builds the cleanest anything
DIY Perks: does it better
Linus is a wannabe.
Linus who? Isn't he in a meseum yet?
Pair this with the 1,5kilo XBOX controller Linus made...
I think someone needs to confiscate this dudes brass, before he can make a brass exoskeleton to become his final form, Brass Man and trys to terraform the planet until everything is nothing but brass.
before he creates his stand, star brass, and steals everyones hands
What a brasshole
@@joshuaewalker I can't believe you have the brass to say that!
I'm just imagining his buttery smooth voice booming out of this golden shining mech
@@donkmeister what the brass is brassening here
Definitely a stunning console matt.
I got put on to you by a friend who showed me a video of the one you completely transformed into something that not only looked beautiful but looked like an item of furniture. Top marks to you mate 👌👍🏼👍🏼
This went from feeling mass produced, to feeling brass produced.
It still looks like total brass
Bruh, that's the good one
This guy never disappoints his diy projects are the stuff of dreams
LTT makes a Gold Controller using Super expensive equipment and a team of professionals.... DIY Perks makes a brass PS5 himself with a Jigsaw and a Blowtorch.... Awesome work!
Keeping in mind that Brass is significantly more affordable and practical, and looks nicer
Not that I could do it myself, but making a jig to put a few curves in a brass sheet is much more simple than re-creating the curves of a controller.
@@PandaMane BUT they could've cast gold OR gold plated instead of making it solid gold. The point is, LTT did it for being flashy, DIY Perks did it because he probably had brass laying around and to make it look better and suit his general workspace theme
@@PandaMane you really think putting a controller shell into some plaster to make a mold is difficult?
Now time for completely transparent PS5
Glass PS5 when?
me waiting for the transparent pcb 😈
😂
o yeeeeeea
Damn, imagine his grandkids walking up into his house's attic and seeing a beautifully patinated ps5 just hanging out among all the other cool stuff. Chef's Kiss 👌
It’s Not paint
@@LumenChaser pat·i·nat·ed
/ˈpadəˌnādəd,ˈpatnˌādəd/
adjective
(of a metal) having a green or brown film produced by oxidation.
Shit, your grandkids gonna be the first generation to have a ps5, we don't have them now
among????
sus
🤌
This guy's voice sounds just like the voice from how it's made.
And boy does it make watching so much better
I'm curious to see how this would look in a few months, the brass is going to patina over time. It might look even better!
that is exactly what i think about
He can gold plate it
I'd go insane if I had this, from all the lil fingerprints thatd end up all over it.
@@hrodvithit Thought that too, put when you think about it, you really have no need to touch it. If you want to press the startup button you can use a pen to press it.
It would look pretty indeed. But the problem is, carrying it would make your hands dirty or whatever its contained in
Honestly, this looks actually really cool. It looks a lot like my trumpet.
Sony should hire you to build these brass PS5 to sell as a limited edition consoles to commemorate certain sales milestones.
they would cost a fortune after market, true collectors item.
tru
Stonks $$$$$$$$$
Or Sony can do it themselves and it will be much better quality and cheaper?
Normal PS5s are already limited edition themselves 😂😂😂
LTT: Liquid cooling a PS5
DIY Perks: Let's do something beautiful
They blew their budget on that golden controler ;)
Both project are totally different thought...
What if we were to combine the ideas, to create the ultimate PS5 😈
LTT: Gold Xbox controller
DIY Perks: Gold(looking) PS5
@Hashir Easa Well, Hi, can we please ignore those silly mistakes on social media from unknown strangers and just understand their perspectives for a better view? Thanks, have a great day. ❤️
I didn't realise Theon Greyjoy was so handy on the tools.
I was more thinking Ramsay Bolton
Laughed out loud at this one
omfg i thought the exact same thing. its the bulging eyes
Don't you mean...reek?
My wife saw me watching this and she says "Was that Theon Grayjoy from GOT?" HAHAHA
I think staining or giving the center cover some colour would make it even more better ( kind of like how titanium items can have a purple/blue/pink kind of colour by heating or some chemicals).
Archeologists: This particular site was home to the brass shaman of the ancients.
This thing will be worshipped as a technological relic for thousands of years after the nuclear war
I swear his channel is just one of those where you hope he never stops making videos.
This man really loves his DIY projects..
No shit
Can't blame him for that😅
I mean, he’s going on 3 million subscribers. He gets paid massively for each project.
i appreciate you showing the failures, it keeps the reality apparent that this isnt easy to do.
Something: * exists *
DIY Perks: where's the *b r a s s*
DIY Perks: Discovers brass
Aluminium Prices: 📉
Wood Prices: 📉
Yeppy
this guy is so wholesome i do not skip his ads, he places them perfectly within it.
same wtf
+1
As I said it in your "4K home cinema" video, this was marvelous. The editing, the way it was narrated, the ideas you came up with, everithing. This video make me feel incredible, i don´t know if it was motivacion, fascination, but it was awesome. You have so much talent man, I´m glad I know your channel.
Until your next video, bye!.
At 14:47 you sound like David Attenborough and I think that's amazing. Smooth voice like hot chocolate.
dbrand: *possibly sued by SONY for selling custom sidepanels*
DIY Perks: “Brrrrr time for brass hahaha”
He is OK to do this, because he is only doing it to his own PlayStation. He will only get sued if he mass produces it and makes money.
@@UNIX32 You never know with corps like Sony. They might try to spin it as him making money off of a video telling others how to do this, not making matters better by his channel name being "Do it yourself perks". But lets hope not!
True.
Well, he's not selling them so its completely legal.
Oh also dbrand:
Go ahead, sue us
@@soulextracter how about we fuck over sony by not buying their shit for once
Matt: Sends Playstation in for warranty repair...
Sony: What happened here?!
😂😂😂
'Since when we made this special edition? I can't remember approving this... "
😁made me spit my soup all around (i really imagined a technician at sony to ask like this)
I think they'd be impressed and take a bunch of pictures.
Sony send Matt a brand new plastic PS5 and start advertising "One off PS5 Gold Edition" $100,000
Wife: I want us to have a baby
Matt: For that, we will need a sheet of brass...
BAHAHA x'D
And of course, you guessed it: LEDs. Nice!
Haha! Made my day xD
Brass and LED lingerie is already a thing. O.o
@@AlexHG88 wow really he made ur dag? , I wish I have one of those instead of a day,
😅, jk
The sheer level of finesse of this video is just amazing. What a great video. 🔥
Dude, I LOVE that he's such a genius and shows himself messing up the process over and over, its so refreshing and humanizing and just all around the basis of why i think this guy has the best youtube channel on the platform.
Messing is actually the german word for brass :)
This man's videos has popped up on my feed several time. And this video has caused me to subscribe. He has the soft soothing voice of the documentary commentators and the DIY skills that I want to learn!
It has everything.
This is impressive! Nice work.
Yo
Heyo
hi!
@@zz-tv1zi ç
Yo
This is absolutely unbelievable!!! My mind is blown 🤯🤯🤯 I feel like a jerk suggesting you punch the PlayStation logo on it though I have no doubt you have the skill/ability to do it!!!
this guy makes my soul gain peace
Using plaster of Paris to reverse engineer a mould was brilliant, gives me a better idea of how I can do projects.
Is it possible to do the same with sand though? Or will it not be stiff enough?
I was expecting some kind of press, perhaps heated, or something but this was a much more elegant solution!
The amount of work put in to these projects blows my mind every single time.
I know this is a little after the fact (just recently found your channel and I'm binging the videos lol) but I'd love to see this PS5 with some internal LEDs! I think having that glow coming out of the gaps between the brass would look really pretty.
Maybe ease up on your parents electricity bill
@@MGrey-qb5xz what a wild and completely unprompted thing to say in a reply to a comment I made 5 months ago lol.
@@WisdomCritFail first time on the internet or feeling self conscious ?
@@MGrey-qb5xz mate his channel is older than yours
@@Raj-187-c sure
If C3PO and Playstation had a baby, this PS5 would be it.
Give the baby to Creepio.
Every video this man makes shows his incredible patience. I could never be so patient with filing, sanding, bending, etc.
I thought he was going to say at the beginning:
"It after all is just plastic, and feels mass produced. Which, is a surprise because nobody can get their hands on one"
My friend bought one from Swedish cdon right before Christmas and got it not long after when they all where sold out everywhere else I got my series x at the same place. Just don't give up took us about 3h each day for 2 days of searching
@᥇ ꪶ and scalpers
That was only at it's release you can easily get one now
@@bitchboi2689 yeah not gonna be that easy unless you buy from a scalper. normal stores are still all sold out
@@lapismage1897 Oh I thought they were back my bad
I feel like it would’ve been easier to cast a mould from the original parts and then melt the metal to liquid and pour it into casts. Then clean the plates up by sanding down any spills or errors.
You never failed to amaze us viewers. Fr tho.
Splish splash
This guy is just so pleasant, I watched that whole ad and didn't even mind
lmao
I thought your pfp was a chocolate bar
@@brrttaa that sounds delicious
Spectacular!!! 🤩 But as a mom of three, I can almost already see all the tiny fingerprints on this piece of art 😂
and eventually the stains hahahah
Haha Dad of only one, I completely agree.
:D your kids make it even more art then
A true work of art. Waiting for you to give us more stuff to see since the last one is two months old already. Hope you're well!
The hardest part of this whole project is actually buying a PS5
@@gillas7434 do want a cookie?
@@gillas7434 you are the problem
@@gillas7434 me too, made huuge profit
@@gillas7434 why and how if one doesn't mind sharing appease curiosity
and thats the problem
- Was it gorgeous?
- Yes
- What did it take?
- A wifi antenna had to be put outside at the back to keep the signal strong
(j4f, he made a masterpiece)
Good thing Ethernet is an option
Lmao
@@logan2906 The internals still have tons of plastic around them, its not like the brass is literally touching the motherboard or anything.
@@logan2906 Are you stupid? Brass will help conduct heat _away_ from the circuitry - the insulating properties of plastic are far worse for cooling. By your logic all of Apple's aluminum-cased electronics should be frying themselves in droves.
Be fair to Will, guys, he predates electrical generators.
Stunning and clean, though anyone else interested in seeing a thermal camera comparison between the stock plastic VS the gorgeous natural heatsync
This is absolutely a work of art. You sir are brilliant!!!
Brother Matt , I must say you've got a very special and positive energy about you man. Really likable , can feel your personality through the video. This craftsmanship is actually amazing .
This video and your recent one of the wood x Carbon fiber PS5 are just insane bro. I'd love to pay you to come and customize my PS5 too haha. I'm in the UK . Godspeed
Agree 😃his delivery as a whole is very pleasant. The ps5 looks sooooooooo goooood 🤩
So how much brass you want?
Mat: Yes.
"Sorry, I can't play tonight, I'm polishing my Playstation"
Your comment deserves more likes.
@@nicholasespinoza9610 likes*
Man of culture polish his Playstation
Phrasing.
Anyone who had an original PS3 can relate. That thing was a fingerprint magnet!
Love the work. I wonder what it would look like if you did warm white leds shining up the inside of the panels.
You can tell this man knows beauty as he’s using the symmetrical digital version for the project. Truly a work of art
Disc version would be a complete pain in the ass for that side panel too
@@trevorandrew8726 which is why you'd move the drive. By extending the internal ribbon cables you could route the drive somewhere totally different like a slim pedestal base or even as an external unit you could hide away. Then slap on the symmetrical panels from the digital edition and you're off to a winner.
I may even try it myself when the next revision comes out and you can grab these units for cheap.
Hey, look at that... A PS5 that is actually worth the prices that scalpers are asking for on EBay.
@@riggyh1058 I smell suffering
@@gameseeker6307 what?
actually no, brass is signifficantly cheap, coming at 2-3£ per kilo
🤣🤣🤣🤣🤣
@@veluta2549 that lol is a mask for pain
i swear, your level of commitment is off the charts..... brass is HARD to deal with, and you pulled it off perfectly. even after what seemed like one disaster after another. amazing job!!
Wow that is amazing creative with a hint of original we need more people like this no joke
The BBC need to pick up a show for Matt to demonstrate his phenomenal abilities. “All the Perks.” BBC, there’s your working title, let’s commission it.
It would be *hilarious* to watch him and Furze try to build things together, like a Maker remake of 'The Odd Couple'. :grin:
He already has a show on youtube that would get more views than anything they could put on BBC, cool story though
@@MattB90 stable income though and exposure to different audiences could boost his channel
They wouldn't do it, because it encourages you do 'do it yourself', which means not buy mass produced shit, hurting big business, so it would be 'left wing'.
Shame really as it could be fun....
@@Merahki3863 maybe if it were 2005, id argue the fact that he wouldnt be cancelled based on ratings is the most stable, id also argue a better way for him to expose himself to different audiences is to do collabs on youtube, how awesome would that be, but yes im all for any way for our guy to get some shine 🙌
the first time I saw your RUclips channel was fixing that headphones jack 6 years ago, and your channel keeps running on unique ideas
This is one of the highest quality channels on RUclips.
there are extraordinary channels on yt (like JAnderson who did likw 12-hour witcher documentary).
I was imagining you were just going to improve the thermals and components at first when I saw the title. This is gorgeous!
That is stunning, I would say a piece worthy of being displayed in an art gallery
Call Linus and tell him you have the next project for when he melts down that Xbox Controller.
LinusTechTips: builds a controller out of gold....
DIY Perk: hold my brass xb
Also DIY: Brass go brrrrrrr :p
I can't wait for the imminent collab. As hinted in WAN Show
Beatiful console, it looks so elegant. Love ur videos, they are just so relaxing
you know something is perfectly built, when the builder gave you a super close up look.
You mad man! Beautiful job though! 😃👍
Said the man who did the 30 minute review of action cam!))
Fuduejisissususuusussiisisisus
u mad man! no need to say that!
pog
@@ibrahimeditz4692 Mate, I am not being rude. Most of what Matt does is crazy and he pulls it off every time. He is a genius! A mad Emmett Brown style genius!
Ayyyyy finally something else I can't have
:( ❤️
Absolutely stunning. Human creativity and ingenuity never ceases to amaze me.
A thing of beauty is a joy forever. He recreated this quote through his craftsmanship.
Diy: “desk” pc
Linus: “desk” pc
Linus: “gold xbox controller”
Diy: “brass playstation “
Linus gonna watercool Ps5, so we can expect DIY Perks to tower heatsink this puppy. 😁
I can't help thinking that they should team-up. Or, eventually, do a crossover: that would be interesting!
@@wisdoom9153 who's Bryan?
And DIY Perks still manages to make slicker and better thought-out stuff than Linus' team. That's what happens when you don't make your videos on a conveyor belt.
Next watercooled PS5 from Linus and DIY Perks.
Matt and Brass, an incredible love story.
Hahahahahaha
Is that how you got your scars
Souldering your cheeks by accident
Organically metallic… amazing!!