My Track Car Gets a New Look // AERO KIT & WIDEBODY
HTML-код
- Опубликовано: 21 май 2020
- This marks one of the last things to ‘complete’ the MINI build. Since I upgraded the suspension, brakes, wheels, tires, transmission, and a bunch of aesthetics, I never got around to fixing the first thing you would notice on my car, the bumper covers. The previous owner never replaced them, and because they weren’t in great condition, I was able to scoop up my car at a lowered price. Well the box for the JCW Aero kit was never checked when it was purchased at the dealership. Doesn’t mean you can’t upgrade later..
If you are interested in any of the items found in this video have a look at the affiliate links below. By purchasing items below, it helps my channel operate and brings more awesome content your ways. Thank you all for your generous support!! 🖤
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
▶︎ ECSTuning - bit.ly/2RQWNSm
▶︎ Amazon US - amzn.to/2DUGfFs
▶︎ Amazon CA - amzn.to/2Go8QV2
▶︎ MINI Body Parts - bit.ly/36paaCa
▶︎ Brake Duct Kit - bit.ly/39jYReA
▶︎ Rear Diffuser Kit - bit.ly/2Sxaozo
▶︎ Fluid Film Rust Preventative - amzn.to/36pVL8A
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
In this video, I install the entire JCW Aero kit, including all of the add-ons that are found on the track-spec GP Aero kit, such the brake duct kit and rear diffuser kit. Not only does the JCW Aero kit look more aggressive and appealing, but the add-ons make it functional. The brake ducts direct the cool air from the front of the car to the hot brakes, and the rear diffuser attaches to the flat-bottom to increases downforce without adding drag. Not only that, but the wide body fender flares make an appearance again, and this time for good!!
It has been long awaited and feels the most complete in a long time. I’m so happy how it turned out. WHAT DO YOU THINK?
For the complete parts list for this build, check out the link found below. It includes all of the mechanical bits like the turbo and engine internals, along with the body parts found in this video. I genuinely hope this helps you guys out!
UPDATED JCW PARTS LIST & INFO - bit.ly/31PO8WK
I truly hope this video has helped you guys out! If it has, help me out by liking the video and stay staying up to date with my ▼
YT bit.ly/2YBd5nf
IG 📸 bit.ly/36quS3t
FB 💻 bit.ly/2E6VXfH
If you are interested in any of the items found in this video have a look at the affiliate links below. By purchasing items below, it helps my channel operate and brings more awesome content your ways, at NO ADDITIONAL COST TO YOU. Thank you all for your generous support!! 🖤❤️🤍 - Авто/Мото
Thank you to all of the people who were able to stop by to hangout while we watched the video! Let me know if you guys want to do this for some future videos ❤️
looking sweet Milan, i take it you are flipping the donor mini?
where did you find the valve cover it looks so cool
0⁰⁰⁰
I gotta say, you give some of the most clear explanations along with great video of what youre doing step by step.
I'm glad you appreciate that! 👊
Man, this is such a full send build. Hopefully, I run into you at the track someday.
Hope so! 👊
Hopefully not literally
For the door seal clips, I've found that if you rotate them 90 degrees with some needle nose pliers, you can lift the clips out without them breaking.
love it! please please please de-chrome. Will complete the look!
I feel it would look terrific if it was on a dark coloured mini. I have chrome in a bunch of places; handles, gas cap, headlight rings, taillight rings, belt line, side scuttle and badges. If my car was Red, or dark blue, or something other than a light colour, I'd be with you on that 100%.
Needs a blacked out roof ! Other than that keep up the good work loving it !
I contemplated it.. We'll see 🤷♂️
@@milanmastracci I actually dig the white roof. Most Minis I see have the black roofs, why be like everyone else?
Dude... that looks awesome.... excellent transformation and installation, congrats! ..... just waiting to see it on the track
Thanks Alex! I appreciate it 🙌 yeah that'll be exciting!!
such a transformation! great job committing to it man!
Brutal transformation !! I love it !!
MY GUY!! 💪
God damn that mini is looking better and better every video you upload!!!
🏁🏁many thanks🏁🏁
Another cracking video, great info as usual. And the car looks superb, admire your dedication to making it as clean as can possibly be. I have done a similar job to the front of my JCW with the subframe just need to move to the back now. Unfortunately over here in the Scottish highlands we have the same issue with salty winter roads. I think your car would look superb with a red roof to match the mirrors and vents.
Absolutely beautiful. Great job, sir.
My friend, the parts list and info spreadsheet you have for this is amazing. Thank you!
Glad it was helpful! Cheers 👊
Two years ago when I came across your channel I was so keen on modifying my 09 jcw. I happen to have a laser blue with the hypersport kit too. But the more pple change out their kits, the more unique it becomes, the more the value increases.🔥. Nice car man
I have another hyper sport kit too that I am looking to part ways with, but haven't had too many bites on it. It still seems the Aerosport kit is more desirable
outstanding!!!
Awesome video as always!
I finally got a tune on my Mini and damn these things are fun.
Thanks Furkan! Yes they are.. its the reason I keep modding mine 😉
Holy shiet, Fire vid bro!!!! You've gotten way better at the clarity and content of your videos.
I appreciate that!
Excellent video of the side skirt. I purchased a set for my Mini Roadster this video will help me do it myself.
good job, thanks for the information and video.
Looks awesome Milan!
Thank you!! 🙌
Nice! Looks like you found one of the newer front lips. Looks good. Oh and the GP diffuser looks so sick. Wish they had something similar for my clubman lol.
Yeah I did! Thank you ☺️ Yeah it would be awesome if the GP parts could bolt right up to the clubby
One day I will be there with my build. Love learning and watching brother
Right on Brian! 💪
The mini looks great Milan, just awesome 👍👍👍👍👍👍
Thank you thank you 🎉
love the new look
Thank you! Myself as well 🙌
This looks sick man!
Looks amazing!
Thanks buddy! 🙌
amazing work, milan! 👍
Thank you! Cheers!
YES FINALLY I LOVE THIS CAR
👏 Finally!!!
Looks good dude, I've dechromed mine and gone for black rims tho
Car looks damn good.
LOOKING CLEEAAANNNN
THANKS BROTHER! 🙌
Love it.
Thanks Dale!
I like that you chose a good looking kit that is also functional! People overlook functionality lol are you planning to add a GP2 belly pan/undertray?
That's the last piece I need, but I'm looking to install some chassis bracing on the front end before that.
Great vid, on the wheel specs you mentioned at the end....wondering what offset you went with?
Broooo that plate is sick 🤙
😂 I get a kick out of it every time I see it ahah
Completely stock I can fit a 235/40/17 tire on a 8 inch wide wheel with a 42 offset I believe. Only running was slightly on the rear when I had heavy passengers. But you could easily trim the tiny amount on the inner flare.
cool whip ma dude
Thanks man! I appreciate it 👊
Congratulations 🎉👏 after 3 years of hard work. I been here since day one I really like this Mini Monster project it looks so great 😍 🙌👌 I hope you make some videos in the 1/4 Mile gaping some V8's 🤟🤟!!!!
That'll be wicked!
Damn dude the mini looks handsome af. Been watching your vids for years and can't believe the mini is finally almost complete lol keep it up bud. Are you going to have a meetup for us guys in Ontario some day after the pandemic? Would be a sick time to show off the mini
Thanks Taylor! Yeah I think it could be fun. Let's just hope this entire Covid thing moves along quickly.. I'm ready for stuff to go back to normal
Very smart...
Hi, congrats about your video and mini also, you made a really great job!!
I really like the mini Keep it Aesthetic wide flares you put in on in your mini, what's size did you get and when can I get them?? thx
Nice work bruh
Thanks 💯
🏁many thanks🏁
question.what is the best CHIP.for the clubmasn S.2009 /6 speed?
to increase the bhp.....right now .the clubman can do 136mph tops
Very nice I like it 💯🏎🚙🚘👍🏾👌🏾
Looks sweet man 👍 lol live the Covid Hair 😝🤘
Thanks Kevin! Oh man the Covid hair is killing me ahah ✂️
Beat me to it haha
That looks NASTY! Well done dude, And a good Demo! UK
Good job buddy !! Looks awesome and I dont like minis too much hahhaha.
Thanks Diego!! 🙌
Where can I find that same aero package you got with the fender flares and everything else that came with it? Thanks
Regarding your wheel setup...., are you using spacers? Did you need to trim or modify the fender liners? I assume you needed to do a small amount for the lip you cut off that the liner sat on, but any additional to squeeze all that rubber under the fenders? Great job!
Looking good Milan. I don't think I've ever seen your hair that long though. :D
Me neither! Its been well over a decade since my hair has been this long 🙈
hey bro do you have a catch can on your car ? and can you tell me if it is better to put a catch can on the rear pcv hose or to the front pcv hose that goes to the turbo?? thanks in advance for the help
Love the channel! You have been an invaluable resource for my own mini woes and upgrades. Had an '08 MCS R56 N14 till I wrecked it. Now I have an '09 JCW R56 N14, and I love it even more.
Recently had to do some work on it and decided to put in a large intercooler, but it seems to be kicking out the bottom of the bumper facie making the panel gap pucker where the hood meets the top of the bumper as it meets the grill. It has the JCW aero kit but pre-2011 variant. did you have this problem at all and was it solvable?
Also, since my pre-2011 aero kit does not have the brake ducts, do you think I could just DIY mod it and get the ducts but just cut out the needed space in my lower grill?
I'm happy to hear that! Congrats on the new car 🙌
I do have this problem, however it hasn't bothered me enough to change it out since it is helping my intakes temps stay low. I don't see why you can't do that 👍
will be a good idea to buy a hair trimmer too ✌🏻
Definitely! ✂️
i have a pepper white r56 in stock form and have followed your videos for about a year now. nice work, but i have to say those flares take away from your car. your channel has been very helpful.
Do you have a link to the fender flares?
How did you paint the brake ducts red?
Good video.? Can I make these same changes on a Base mini 2 door.
You sure can!
hey bro quieck question what are the size of the rim and tires and what is the brand of the wheels
Hey my friend, do you have a turbo timer to run the car to cool down the turbo?
I do not, however the car comes stock with an auxiliary water pump to flow coolant through the turbo after the car has been turned off.
Do you recall the wheel offset?
Hey man what type of wheels are those and size
Good outfit!
Could you share the information about wide fender seller?
How about now a GP wing or even a challenge wing ?
Unless you have more adjusting to do nothing looks like it's lined up. At 9:49 the front splitter clearly doesn't line up with the fender and the back of the fender doesn't line up with the panel right next to it (right under that black duct). Plus you have a tremendous gap all around the front where the splitter meets the hood (the area under the headlights)
That is because of the fenders. They're aftermarket and the fitment isn't perfect. Trust me, it annoys me as well and I genuinely contemplated running the narrow body setup because it doesn't have any alignment issues. We'll see..
I think a red roof would set it off perfectly with the other red accents
Yeah I think you're right! 💪
What wheels r those, they look super good!
Check the end of the video, I go over them 👍
Just asking. Got the DDMWORKS air ram and box. Did you or have you had you plastic push pins pull out or brack on the hood. I had to get and put small screws with washers. #6 but think #8 would be better.
Hey Tara, I don't recall that being a problem with mine. I know the install for the duct that bolts to the hood was a pain to install, but I don't remember seeing any back out
Would you colour match your flares to the body colour?
I've contemplated it. I first want to ensure they last me before I paint them 👍
Hello, very good video, one question, what is the model of the mini?
It is an R56 John Cooper Works.
@@milanmastracci what year is?
I know this is an old video so I maynot get a response, but at the very beginning of the video you show off those wide fender flares and that is exactly what Im looking for, if anyone could please tell me where to get them I would greatly appreciate it, im tired of digging through all this universal crap, I just want some wider fender flares that can mount up like oem
Hi I am a fan of mini’s but i was wondering if I wanna do something like your’s, body and mechanic mods how much money should I expect to put in?
I will go over that in a later video 👍
What rims are those?
Is that white side skirt the black one that came on the car originally and did you just paint it? Where can I get the after market side skirt?
It is not the same as the black one on the car. That is another kind of side skirt all together.
@@milanmastracciThanks. Where can I buy the after market one?
What's the offset on your wheels?
Do you have the front bumper you removed still and if so could I buy it? I would cover shipping... Hit a coyote and got backed into and hard tracking down another hypersport aero front bumper.
Send me an email at milanmastracci@gmail.com or IG @milmast
Milan do you have any HD Photos so I can make the car my wallpaper?
Not yet, but I'll get some for sure!
Do a chrome delete 🙌🏻
Looks great just wrap the roof in red or black
I might do red 🤷♂️
That’s combination looks super🔥
2nd like👍
Hi Milan Are you going to put paint protection film on the mini ???
Hey! I'm not sure yet. I think I am going to do the bumper at least. I might swap out my hood for something a bit lighter with venting 🙈
milanmastracci nice!!!!
What’s the name of the outro song? It’s catchy lol
Hi, how much outstanding offset on your widebody
Are you asking how much wider are my fender flares? They are +25 and +30mms, which is why I can run the wider wheels and tires.
everyday he skirrt skirrt
Hi... Great Car. How much The Body Kit.. Listen and Shipping.. Germany??? Thanks.. 😔👍🙏👋
WEY2LOUD best tag I've seen
Thanks Luis! 😂
@@milanmastracci Lol no prob man, cheers from Miami
Hey Milan, is it just me or the black trim on the body kit doesnt match the widebody fenders?
You'd be right in saying that. The factory trim on the body kit is made out of plastic, and the flares are made from fibreglass. The colour is similar but not bang on. If the wide body setup works nicely this year, I'll probably get it all painted over the course of next winter 🤷♂️
Put some spacers on it
You should do a chrome delete, it makes the car look 10x more aggressive
What are those rims called. They really look cool on a mini 🔥
I mention the wheel setup in the video towards the end 👍
@@milanmastracci yes I know but don't know the correct spelling. Just wanna add it to my list of this I want to get lol..
sincere congratulations! I followed this project from the first episode and you did something wonderful! just one thing ..... mini and aggressive they cannot be in the same sentence come on .... always looking at you with those "big eyes" ... my Alfa Spider 939 designed by Pininfarina is aggressive ... I hope you agree with me, Greetings from Italy :)
Thank you so much Lorenzo! 🙌 I should have said, "For a mini, it is aggressive" 👍 I have an alignment booked for this week and should be able to beat on it after that 😂 Cheers!
Pleeeaae take your jcw to the dyno
I will 💪 gotta see what kind of numbers she's putting down!
Check your chocolate timing chain 🔗 then replace it, over, and over again.
Bro the under side of your car is immaculate!! 😍😍😍
Thank you 🙌 I've done a hell of a lot of work to get it to that point 👍
what size tires do you have on your mini?
I go over the wheel and tire setup at the end of the video 👍
I caught that
Outro song please ???
That panel gap between the bonnet and front bumper looks a bit big.
Very resourceful, Milan...if your were a surgeon, you'd be doing liver transplants! Love your channel...haven't heard as much from you lately. Your hair's getting long like the rest of us in this Covid mess!
Maybe one day if cars don't work out for me ahah So true! I need a cut so bad..
Hi Milan
Oh
is it after faster on your speed limited roads or did you only for shine 😂😂😂😂 you can take front lower rubber lip of Opel/Vauxhaul Vectra B fits like on every car and works aerodynamical amazing, if you fit anything it suspend in and flip out you getting for about 10€ 😆😆