Hi KETIV team, I have a problem I cant solve its similar to the part 1 model with the holes. Lets say I have holes and I want them to start at 1 inch from the left side and I have a fixed spacing between them Yet I want to keep atleast 2 inches from the right side without holes. using three parameters here (fixed spacing between holes and start point and end point) isnt possible... I hope you get what I mean ... its complicated...
Hi Rihab. I believe I understand your question. When trying to annotate a distance (START-MIDDLE-END), one of those parameters will end up being a driven parameter, which could possibly be the source of some of your issues. You can still make calls to the driven parameter in your ilogic like with regular parameters (ie "suppress feature if END distance is =/ 2" or so). Feel free to reach out to support@ketiv.com for more information though.
I'm attempting to use iLogic to get weights on a drawing. The drawing contains one assembly but I need multiple assemblies. How would I go about getting the total weights of the number of assemblies I need rather than just the weight of one assembly? Autodesk called me about this issue but they just told me to put multiple assemblies on the assembly file but turn off the visibility. This will make the files huge. That method is out of the question so I'm trying to figure out the iLogic. Any help would be appreciated.
Hi Antichris6999, The workflow provided by Autodesk would be the best, you can bring in those sub-assemblies and then create LOD's for each. Once you suppress these LOD's to your desired assembly you can extract the weights within the iProperties. I hope this helps out!
42:25 It's driving me crazy that you put a space between the first section and the first else if, but no space between the second section and second else if
We have longer and shorter content videos on iLogic, sorry you found this one too long. Feel free to use our timestamps in the description to skip to the parts you are most interested in.
Follow us!
Facebook ►► facebook.com/KETIVTech/
Twitter ►► twitter.com/KetivTech
LinkedIn ►► www.linkedin.com/company/ketiv-technologies-inc
Blog ►► ketiv.com/blog/subscribe/
The part was called "A Linkage to the Past". LOVE IT!
Glad you enjoyed this video! We hoped someone would notice the cheeky reference. #allnerdshere ;)
this is great you guys. looking forward for more
Thanks for watching! Make sure to subscribe and ring the bell!
I learned a lot from that video. Thank you
Glad it was helpful! KETIV | Marco
Thank you very much guys, that video is very helpful for learn to ilogic. I will look forward your videos.
You are welcome!
Superb explain 😎
Glad we could help!
How about customize parameters? If you have a Dresser which a model is compose of different parts?
Your "HoleSpacing" Equation should be (Length-(d16*2ul))/(NumOfHoles-1ul)
Thanks!
Cool !! keep doing
Thank you!
Hi KETIV team, I have a problem I cant solve
its similar to the part 1 model with the holes. Lets say I have holes and I want them to start at 1 inch from the left side and I have a fixed spacing between them
Yet I want to keep atleast 2 inches from the right side without holes.
using three parameters here (fixed spacing between holes and start point and end point) isnt possible...
I hope you get what I mean ... its complicated...
Hi Rihab. I believe I understand your question. When trying to annotate a distance (START-MIDDLE-END), one of those parameters will end up being a driven parameter, which could possibly be the source of some of your issues. You can still make calls to the driven parameter in your ilogic like with regular parameters (ie "suppress feature if END distance is =/ 2" or so). Feel free to reach out to support@ketiv.com for more information though.
I'm attempting to use iLogic to get weights on a drawing. The drawing contains one assembly but I need multiple assemblies. How would I go about getting the total weights of the number of assemblies I need rather than just the weight of one assembly? Autodesk called me about this issue but they just told me to put multiple assemblies on the assembly file but turn off the visibility. This will make the files huge. That method is out of the question so I'm trying to figure out the iLogic. Any help would be appreciated.
Hi Antichris6999,
The workflow provided by Autodesk would be the best, you can bring in those sub-assemblies and then create LOD's for each. Once you suppress these LOD's to your desired assembly you can extract the weights within the iProperties.
I hope this helps out!
What was the reason for creating the "Eric" User Parameter?
Todd Barnett In 2019 Eric Units are more popular compared to the imperial system
Can the User Parameter "Length" be a Model Parameter?
Todd Barnett ofcourse not
Is the iLogic code case sensitive?
Abbas, absolutely. That's definitely something you need to keep in mind when writing code for automation.
@@KETIVTechnologies Thanks!
Link to the Past 👀
42:25 It's driving me crazy that you put a space between the first section and the first else if, but no space between the second section and second else if
Thanks for catching that Calacene! We'll look out for that in the future.
you have issues
I don't know, I just find Solidworks easier to use, less complicated and more logical.
IKR
really too wordy. this could have probably been done in a relatively short period of time.
We have longer and shorter content videos on iLogic, sorry you found this one too long. Feel free to use our timestamps in the description to skip to the parts you are most interested in.
@@KETIVTechnologies It is not often that I complain. As a newbie, I was looking for a focused means of answering questions. I want to learn.