How To Install The Graco Airless Finishing Kit
HTML-код
- Опубликовано: 1 авг 2024
- In this video we show you how to install the Graco Airless Finishing Kit which will turn your Graco Airless sprayer into a Fine Finish machine!
We go over all the components in the box, what features the kit will give you and why someone would consider adding this kit to their Graco sprayer.
Graco Finishing Kit: spraywell.com/graco-19b968-ai...
keywords:
Graco, Graco Paint Sprayer, Graco Finishing Kit Хобби
Great information
A little silicone paste makes it easy to slide the priming hose slide onto the barb, and won't degrade the hose. FYI, as petroleum based grease will degrade rubber and some plastics.
great and accurate advise. thanks
very nice
I can spray very fine fishing just with the sprayer using a 210 tip.
Can this be use on the graco 210es
Where can I purchase the kit. What’s the part number
Can one install the "Finishing Kit" on a Magnum X5?
I was trying to figure out the same thing. You probably can. Instead of threading the suction pipe from the hopper into the pump, just use a small section of the suction hose from the X5 to slide over the metal pipe that comes out of the hopper and clamp down onto that. I have not tried it but I don't see why that wouldn't work. The X5 uses a barb instead of threads to connect the suction hose.
Why bother? The kit cost as much as the X5….No offense but that’s a homeowner grade disposable machine.
@@DownloaderVideo I ALREADY HAVE THE X5
It doesn't take 1 or 2 gallons to get paint through the line to the gun on a 50 ft hose. That's grossly over stated. It's only about 1/4 th of a gallon.
It’s about half a gallon. Don’t forget once that gallon gets to the bottom and below the siphon filter