Great project but when you added iodine solution to the mixture the graphite layer began to destroying, it was much better that add the iodine solution to titanium dioxide before put the glasses together and also this method help to better control for adding iodine solution and it's needed amount, Thank you again for sharing this great DIY project :)
I'm not trying to be negative about this but, I'm paying .17cents a piece for solar cells already made. Just wire them together and solder. Can't beat that price and convenience.
platinized glass would work as well- right? platinic acid decomposes into platinum at high temperature- 500*C at most, but works to some extent at just 200/300*C as well
Ya lo hice, sólo que el voltaje creado es del orden de medio voltio y perdura mientras no se seque el electrolito, secado este finalmente esta celdilla dejará de funcionar...saludos desde México a 3 abril 2020.
@@cosmefulanito5933 no es una batería, es una celula solar de verdad, pero el electrolito no se puede dejar a secar. Lo mejor sería cerrarla con silicona por los lados
After watching ur video, i am tempted to do this at home. May i ask where do you buy the materials? What are the quantities and concentration of the chemical? And also what is the concentration of nitric acid.if the concentration is greater 3 percent, the buyer has to hold a home office license which I don't have
Hello sir! Great video indeed! But actually I have been given a project in which i have to make a solar cell and then to use it in a circuit like on a breadboard to show that it's working properly. But i don't know how to use a DIY solar cell in a circuit. Can u help me in this regard? And can I make a solar panel from this DIY solar cell? Kindly give me suggestion. Thanking you!
better you use a small screen printing stencil for apply layer on glass...you can make any size stencil..easily using nylon bolting cloth and any frame
Can you help me , please ! IHave a 22 Wh portable Generator (powerstation ) and i want to charge it with a Foldable 5V 14W and 2,33A solar panel , i understand that if i buy a 5 -15 volt step up convertor will work , what do you thynk , will start ? I thank you in advanced
Boosting the voltage directly from solar panel with a converter may not be a good idea, you can use multiple solar panels or omit the buck regulator in the foldable panel( inside it contains 5v buck converter ) to reach 15v
@@bamethyst2148 I am asking if it can be done on a larger scale like solar panels but home made. It's not the same thing buddy. The solar panels bought cost a larger fee for the convenience of a company making it for you. I was seeing if this process here can be used on a larger scale and work efficient. I do hope your sarcasm wasn't based on a negitive mindset, but a joke for fun and not an insult
This is scientifically true. The original inventor actually received a Nobel Prize for this. Thank heavens its not made of razor blades!
Jesus loves you!
no he didn't get Nobel prize
Great project but when you added iodine solution to the mixture the graphite layer began to destroying, it was much better that add the iodine solution to titanium dioxide before put the glasses together and also this method help to better control for adding iodine solution and it's needed amount, Thank you again for sharing this great DIY project :)
You said Awesome
@@Lazydayyt ❤️🙏🏻🙏🏻🙏🏻
એજરૂરકા.મકરેગા
@@zalamanish8896 pafsdjbvdfcdgjhsfkb
@@Lazydayyt jggb cnn g bn blurb ggn
Finally one youtuber who doesn't use copper and nichrome or blades to make solar cells lol 😆
He did in another video….
Why copper is not a good option?
I'm not trying to be negative about this but, I'm paying .17cents a piece for solar cells already made. Just wire them together and solder. Can't beat that price and convenience.
where can i buy these cells? and how can i know the output power???
@@ebraamnageh435 here for that as well
Where?
platinized glass would work as well- right?
platinic acid decomposes into platinum at high temperature- 500*C at most, but works to some extent at just 200/300*C as well
I think candle flame doesn't gives graphite....it gives soot (carbon black*)
You're the smartest person in all these comments.:)
Your tutorial is amazing, so does the background music. What's the music's name?
What is the use of dye !
For light absorption !
Or as impurity (doping )?
Pretty sure it's for Doping.
@@Victor-056 for light absorption black colour absorb 40-30% of light that hit on them
@@rameshtonjam4300 Can't it be both?
If I'm upscaling this using, the conducive glass from a broken lcd TV, what's the ratio for titanium dioxide and iodine?
Ya lo hice, sólo que el voltaje creado es del orden de medio voltio y perdura mientras no se seque el electrolito, secado este finalmente esta celdilla dejará de funcionar...saludos desde México a 3 abril 2020.
Kiubole
Porque es una batería, no una celda solar.
@@cosmefulanito5933 no es una batería, es una celula solar de verdad, pero el electrolito no se puede dejar a secar. Lo mejor sería cerrarla con silicona por los lados
Where i can get conductiv glass
From a broken LCD screen tv or smartphone
Have you tried the internet?
oh my gosh, an excellent project I really have to make it. can you make multiple ones and connect them together as a panel?
Yes
what is a concentration and volume of TiO2 and nitric acid used?
After watching ur video, i am tempted to do this at home.
May i ask where do you buy the materials? What are the quantities and concentration of the chemical?
And also what is the concentration of nitric acid.if the concentration is greater 3 percent, the buyer has to hold a home office license which I don't have
To make a solar panel we need silicon too but where in the video did you use silicon?
there are other semiconducting elements than silicon
Is the udolin solution same a the fruit sqizzed?
You can find this in a pharmacy
What is the use of dye.
Is the is important.
Or we can use any other dye or colour.
Craft Master it’s for cleaning any impurities and no you can’t use any other dye
can you use something else instead of titaniumdioxid and tincture iodine
🤔 um, how many voltages it create?
0.7v under uv light.
Amps...its the Thing !
How do i get conductive glass?
sold on ebay,indiamart ,amazon etc.
@@Lazydayyt Do they have to be that small? How about 40x50 mm?
@@Lazydayyt Ok, thanks :D But they will give more power, if bigger?
From where we will get nitric acid
Hello sir! Great video indeed!
But actually I have been given a project in which i have to make a solar cell and then to use it in a circuit like on a breadboard to show that it's working properly. But i don't know how to use a DIY solar cell in a circuit. Can u help me in this regard? And can I make a solar panel from this DIY solar cell?
Kindly give me suggestion.
Thanking you!
Just wanted to know is this experiment safe? Because of the acids,thats why.
Nice project and I have the same multimeter.
Some of this commentary is completely useless.
Hussein K. M. So is yours
Btw conductive glass is silicon glass
How would you safely dry this at 60c?
i dont understand the graphit layer part
Can we use Hydrochloric acid instead of sulfuric acid? Pls answer fast and true I have a project to be done
Pls what is the make ingredients since I can't get the titanium oxide and the acid
Sorry I meant lodine solution
What is the Conc. of hno3
Could we use artificial dye?
Yes
can i use any fruit juice to dye it
Red/blue only
What does the pomegranate juice do
It's giving less dc power ⚡ I need 3.6 v cell how to make
@Nothing Is impossible ok
How to connect each other solar cell
better you use a small screen printing stencil for apply layer on glass...you can make any size stencil..easily using nylon bolting cloth and any frame
Pls this 360wv is how many volts or watts?
Hi. Where can i buy iodide electrolyte? Send link please
You go to any medical center and ask for iodine solution, It's used widely.
What is the substrate made up of?
Is it 36, watt or 360watts?
Good video .. saving money on energy is always good
Cool nice project keep em coming:)
How can I replicate this in a ussualy size
Good job, thanks for sharing.
I like to make them but how much those chamical ?
Hello
Q
How do you print that solar cell sheet?
You can find best solutions on Avasva website.
Shantelle Adeline Thanks for advise
are you fake commentor ?
Can you help me , please ! IHave a 22 Wh portable Generator (powerstation ) and i want to charge it with a Foldable 5V 14W and 2,33A solar panel , i understand that if i buy a
5 -15 volt step up convertor will work , what do you thynk , will start ? I thank you in advanced
What is the charging voltage of the power station?
@@Lazydayyt 13 -25 V -max 3A ( so is writen )
Boosting the voltage directly from solar panel with a converter may not be a good idea, you can use multiple solar panels or omit the buck regulator in the foldable panel( inside it contains 5v buck converter ) to reach 15v
@@Lazydayyt how can i omit the buck regulator , were i fiind it
Because is in one pice , were to cut to fiind this regulator
Wie viel Ampere wird erzeugt
And what’s the physics behind this, seems interesting.
Photoelectric phenomenon
Super 👍🤗
Where you get the graphite layer sheet pls ans
no
those ingredients cannot be easily produce inside your house. what an effing DIY at home.
Can you tell how much watt is this???
I did it with very thorough instructions from Avasva projects.
Can u share link plz
@@crazytillu3612 check on google my friend
Why do I think it seems like bs propaganda...
Can we scale it to industrial size?
Recycle old LCD TVs to get two massive sheets of conducive glass.
from where can we get there items
This is not the same multimeter wire connected to the thing you made
WOW IT'S AMAZING &
BEAUTIFUL 😍
LOVE IT💖
THANKS
BLESSINGS🥰🤗
Sir ye konsa powder hai
This is a battery, not a solar cell.
Where can i buy this one?
What is the name of the tape
Hmm dodgy that the voltmeter wires go out of screen and then back in
Hello
No this is real, ThioSoi2 did this with raspberry and toothpaste.
Does it work?
It's a good video .
Where to get nitric acid and other things
conductive glass is supposed to already have a titanium oxide coating that is conductive
no. What makes glass conductive is Oxide coating of Tin.
Ini baru solar cell sungguhan, yg lain hoak semuanya.
Apa bener gan sdh coba bisa?
Aku jg lg cari tutorial yg real bisa bukan hoax
Why don't solar cell makers talk??? I can't see the screen!
Graphite forms at 3000degree c
All that work and you can't even get 1V? I'm very sceptical about this.
Nice
Really good
Ok... How the ballz you learn how to do this?
السلامة السلامة علكم هل يوجد فرع او وكيل لي هذا الشركة او رقم تلفوان لتوصل
ini beli dimana gan
30 sec in and already I realized this ain't no DIY🤣🤣🤣
Next video: How to make industrial grade titanium dioxide and nitric acid, amd do graphite plating at home
Why did you dye it?
So dose it work
this is true even thoisoi has did it
Interesting video
Why. How. What?
I try this at home...
Now my home become electric power plant...
Company name
wtf pvt lmt .
🤣🤣🤣🤣🤣🤣
😂😂 lol
Nice project
This does work
Would you consider this being done to a larger scale?
@@mobiletainment5471 you mean like on the roofs of houses? I sure hope that gets invented soon.
@@bamethyst2148 I feel like it already is, but it's not ideal for the elites.
Either way, this is pretty neat.
@@mobiletainment5471 that was sarcasm
@@bamethyst2148 I am asking if it can be done on a larger scale like solar panels but home made. It's not the same thing buddy. The solar panels bought cost a larger fee for the convenience of a company making it for you. I was seeing if this process here can be used on a larger scale and work efficient. I do hope your sarcasm wasn't based on a negitive mindset, but a joke for fun and not an insult
Nice,,
Where does one get the silicon?
I'll buy it from you to see if it's work
Super électrique
Can it turn on led
barely
good video
It’s cool but who has nitric acid at their house :(
Sadly true
Conductive glass is costly
mantap bosss
Terima kasih
A yes I would have hn03 at home
Cool
I would like to see this on a square of 125x125mm
Yes.Thank you for commenting
Çok şükür ki internette gerçek bir solar hücre yapımı gördüm. Bu konudaki videolar hep uydurma.
Don't try