I paid a guy to do the programming for $200. I simply could not figure it out. I have the same cm-dc3. Car would go into run position but wouldn’t crank. It was the tach that caused it to not start. I know now the tach has to be programmed first before anything. This was so much easier in the video compared to when I was doing the install lol
I have a question i have the compustar t12 with the drone and the Cm900as my installer didn't do a good job installing the alarm and had the antenna disconnected i cant auto start my car it tries but doesn't crank by the way my car is a manual ive tried different thing before it didnt even try to start it used to give me a error now it tries i did reserve mode it stays on then shuts off but when i try to autostart nothing happens is there a wire or program sequence im missing
Hey man, I got an 02 Nissan Xterra with an FH- X720BT pioneer. The radio is getting power but it’s actually turning. Everything is plugged in and works, except the radio
I am trying to install the same module (CM-DC3) on a 2019 Sienna Push to Start. I got everything connected as far as the T-Harness. When I turn the vehicle on, I get a 1 red led flashing on led#1. I can't get the green led and I have tried so many things. Btw, I have installed these systems on 4 other vehicles so I have an idea of how the process is supposed to go. I reflashed the module but I still get the 1 red led flashing. Checked all the connections but can't figure out what the issue is. Let me know if you can help me
What's up brother. I have the cs7900 system. Do they have a part or something to install for the antigrind feature like how the Viper systems have? Couple times I put my keys in the ignition and accidentally cranked it and it grinded the starter.
20511024671 - Remote start failed on 20511024671, Tach Sensing Failure. - I get this error each time I try to remote start in weather 50 degrees or colder, any suggestions? 2000 integra manual. Thanks !
Great video brother keep making more doing a really good job.
Thanks brotha🤜🏽🤛🏾💯💯
I paid a guy to do the programming for $200. I simply could not figure it out. I have the same cm-dc3. Car would go into run position but wouldn’t crank. It was the tach that caused it to not start. I know now the tach has to be programmed first before anything. This was so much easier in the video compared to when I was doing the install lol
I am definitely here for the security installs … that’s my area for most improvement.
yesssssir i got you bro
So I did these steps and I’m still getting a tach sensing error with no start… any ideas what could be causing that? 2019 Nissan Sentra keyless start
I have a question i have the compustar t12 with the drone and the Cm900as my installer didn't do a good job installing the alarm and had the antenna disconnected i cant auto start my car it tries but doesn't crank by the way my car is a manual ive tried different thing before it didnt even try to start it used to give me a error now it tries i did reserve mode it stays on then shuts off but when i try to autostart nothing happens is there a wire or program sequence im missing
Hey man, I got an 02 Nissan Xterra with an FH- X720BT pioneer. The radio is getting power but it’s actually turning. Everything is plugged in and works, except the radio
I have the same DC3 install in a 2014 toyota corolla it start the car but won't open or closed the doors from a R5 remote any suggestions?
I am trying to install the same module (CM-DC3) on a 2019 Sienna Push to Start. I got everything connected as far as the T-Harness. When I turn the vehicle on, I get a 1 red led flashing on led#1. I can't get the green led and I have tried so many things. Btw, I have installed these systems on 4 other vehicles so I have an idea of how the process is supposed to go. I reflashed the module but I still get the 1 red led flashing. Checked all the connections but can't figure out what the issue is. Let me know if you can help me
How do I program tach after the alarm has been installed t12 with drone and cm900as 2006 manual transmission acura tl
What's up brother. I have the cs7900 system. Do they have a part or something to install for the antigrind feature like how the Viper systems have? Couple times I put my keys in the ignition and accidentally cranked it and it grinded the starter.
I want to learn, will you teach me?
Where is that box located??
20511024671 - Remote start failed on 20511024671, Tach Sensing Failure. - I get this error each time I try to remote start in weather 50 degrees or colder, any suggestions? 2000 integra manual. Thanks !