HOW TO replace or clean REAR BRAKE pads and discs on Peugeot Rifter, Citroen Berlingo III and more
HTML-код
- Опубликовано: 22 июл 2024
- Detailed tutorial about how to replace or clean rear brake pads and discs.
Rear discs (268 mm) - OEM: 1609582880 or 3642786
Rear pads - OEM: 1609000680 or INNER: 9819426180 OUTER: 9819426280
The procedure is the same for the Peugeot Rifter, as well as the Citroen Berlingo III, Opel (Vauxhall) Combo, Toyota Proace City Verso and Fiat Doblo. The car model in the video is Peugeot Rifter GT Line Long (L2), 1.5 BlueHDi 96KW / 130k, manual transmission M6.
0:00 Introduction (turn on subtitles in your language at the bottom right)
0:29 Do not disconnect the connector
01:01 Electronic parking brake (EPB) How to service?
01:35 Cleaning the brakes
05:21 Check the cuff
07:10 Graphite vaseline
07:16 Threadlocker
08:19 Outer and inner (piston)
10:26
#PSA #stellantis #peugeotrifter #rifter #howto #EPB #electronic #parking #brake #pads #discs #rotors #caliper #handbrake #rear #squeale #noise #piston #citroenberlingo #opelcombo #toyotaproacecityverso #fiatdoblo #replacement #repair #release #manually #DIY #carsandrepairs #tutorial #instruction @carsandrepairs 
Авто/Мото
Thanks for profesional and simple presentation of thr rear brake work Very good job
Thnak you very much for your support!
Thank you for this video. No need to use a scanner to service the rear brake pad, didn't know that :D
Diesel filter replacement, brake fluid replacement, oil filter replacement
THANK YOU VERY MUCH 👍🤝
Dzięki za kolejny film 👍, może nagrałbyś jak wymienić płyn hamulcowy
Super Vidéo, quelle clarté et quelles belles prises de vue!!! Merci mile fois.
Nous sommes heureux que la vidéo vous ait aidé :)
Great video bro! you saved my life!
We are glad that our video helped you. We will be grateful for every share of our RUclips channel on your social networks!
very good video, you helped me a lot, thank you very much✌🏻
Welcome! We are glad that our videos help you. We will be grateful for every share of our RUclips channel on your social networks!
Great video. Thanks for the tools shown. Many car manufacturers strongly recommend that you do not lubricate the wheel bolts.
It's graphite vaseline for high temperatures - no problem.
I think that the lubricant reduces the friction force and the bolt may come out spontaneously.
I also saw the instructions for the "Ate" caliper. It says that you should not lubricate the guides. It depends on the design. This is a long-standing dispute. Thanks again for your work. I recently purchased a Rifter. There is very little information about the repair. Your videos are very useful.
Tell me, have you encountered the loss of antifreeze yet?
Thanks for all these videos. Awensome work.
It would be great to add video how to make car quiter. For example by installing soundproof mat.
Thank you very much for the recognition! :) And thanks for the video tip!
Dziękuję za informację i pomoc
You cannot apply grease on wheel hub because it is a friction joint. Hub must be mirror clean with lateral runout max 0,01 mm. Disc must have lateral runout max 0,04 mm. 6mm screw in disc 10Nm. Brake caliper support 100 Nm. Brake caliper 30 Nm, Electro motor housing on caliper InHeX 2x 10Nm. While pressing piston bleed out fluid throw bleeding screw. Not back in system
Спасибо за ролик !👍 Всё понятно и доступно 🤝
Я рад!
Como haces siempre compañero, videos increíbles. Un saludo.
¡Muchas gracias por tu apoyo!
Excellent video. Can you do video how to change engine coolant. Please please
Vídeo muito bom,obrigado pela partilha.
You are welcome! :)
Great Video, Does this work in the same way on the Peugeot 208 and Opel Corsa 2020 and later models?
Thank you for the vid. When you are counter-clockwise turning the piston against the new pads, you are also moving the brake disc freely. Do you have to keep turning counter-clockwise till the piston is pushing against the pads and the disc is fixed? Or do you have to stop before, so the disc can rotate freely?
З новим роком!
Thanks! The same for you! 🥳
Teşekkürler 🤗
Rica ederim!
Hi great videos excellent. Can you do one for coolant change . 😊
Hello,before you start do you turn the handbrake on or off inside the car ?
Hi my Peugeot partner 2020 signal auto P won’t start engine it’s electronic parking could you advise
We can also put 9V or 12V at the motor, in a direction goes out, by inverting the poles, can be pressed. But, to avoid electrical issues, better like you do, if possible...
Its also the same on the 5008 2 l HDI ! i did mine half a year ago.
Thank you for the information!
Hello friend, very good video, I wanted to ask you a question, in my case I changed the discs and rear pads of my rifter myself, but I used a piston repositioner instead of how you have done it, as a recommendation for the future, do you think What should I do like you did or like I did? Do you know if the way I did it can cause a problem with the electric brake? Greetings and thank you.
Thanks for the question. I think it doesn't matter which way it is done, but my way it can be done without special tools.
Thank you for this awesome video 👍
Could you please answer an important question for me? Was your EPB released at the time of disassembly? My EPB was released as i removed my brakes. After removing the EPB-Motor I turned the EPB screw a bit to completelly free the brake pads. Should I adjust something when I reattach my EPB-Motor or will the EPB-System adjust it itself?
I also have this question, EPB released before starting or disasemble with EPB still engaged?? Can this go very wrong? I know other manufacturers require to be hooked up to PC to re calibrate. Thanks and great video.
@@rickyhill5263 I don't know if you still need this information, but I have already done everything and can say that the EPB adjusts fully automatically without having to readjust the screw 🙂
Я так долго искал такое видео чтобы посмотреть как поменять на своем опеле glx задние тормоза и колодки,но не чего не нашол, но теперь спустя неделю вот оно.
Teşekkürler
Welcome!
Como cambiar el aceite de caja de velocidad gracias
J’ai repoussé le piston avec un repousse piston sans tourner la vis torx derrière quel cause ?
How do we replace the fuel filter without losing a tank of fuel.
Fuel filter replacement video tutorial: ruclips.net/video/ZGCccwISJ_0/видео.html
merci 2024-03-06
Welcome!
Nice garage pinching money job
Thanks!