Cannondale Lefty Ocho Carbon Serviced || Lefty fork serviced ||
HTML-код
- Опубликовано: 15 окт 2024
- Cannondale Lefty Ocho Carbon Serviced || Lefty fork serviced || #cannondalelefty #leftyforkbike #mtb #lefty #bicycle #cycling
What oil do you use for lefty fork?
RSP Lefty Lube has been developed in collaboration with Cannondale for the care of Lefty suspension forks (from model 2013). Lefty Lube is an extremely friction-reducing lubricating oil, it improves performance and also increases the longevity of your Lefty suspension fork
What is the advantage of a Lefty fork?
Compared to a conventional fork of the same travel, the stiffer Lefty should provide more precision, control, and active suppleness in rough terrain, or under hard braking and cornering.
How to service Cannondale mountain bike lefty fork
Cannondale lefty bike fork
lefty fork service
lefty Ocho Carbon fork service
Song: Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/mortals
Watch: • Warriyo - Mortals (fea...
thanks for the video. Please help. Time 2:14 - how did you disconnect it? many thanks for your help. Lukas
Hi You are welcome 🙏
You mean disconnect damper ?
To remove damper you need a 14 mm long socket/box spanner, and open that from inside of stanchion tube.
@@nasa-biketech Thank you for answer. I loosened the screw (18mm spanner) - time 2:06....but can't get it off - exact time 2:14-2:16. Thanks
@@lukaskamenicky8787 you just need to pulled out that air cap assembly to remover it, it can might be hard sometimes.
@@nasa-biketech ufff i got it. thanks :)
any technique to do it? My air cap is also very hard to pull off
Hi Nasa, can you tell me what kind of fork oil i can use (viscosity), i know that you prefer grease instead of oil but i would like to try Oil service with SKF dust seal. Thanks!!!!
Thanks for the video!
Which size (diameter) is the Long Socket you use @2:21 to unscrew?
I used the Lefty Ocho service kit and put also the oil in my Lefty and now it is leaking…. I think i have to put the SKF sealing Ring into my fork
Hi
That is 14 mm long box spanner. That I used to unscrew.
@@nasa-biketech
Do you prefer using grease or oil for the Ocho? I think oil will have less Friction and be smoother to the fork. I think the skf Seal will Not leak… i will have to try it
@@SRR-wu2yw We Prefer using Grease instead of because of oil will be more chances to dry soon or maybe leak from dust wiper seal , you can use fork grease, e,g, Sram Butter/ RSP Fork grease, or any good quality fork grease for better performance .
Any experience with SKF seal? I would like to switch to that.
Is that the lower leg that shows paint rubbing off? Should that get replaced?
It's always better to replace of the rubbing surface noticable when you feel by hand.
🙌💥
Получается они вечные?
Yes ofcourse
А протёртый до алюминия анод ни о чё не говорит? Вилка уже по ноге труп.
@@GeraRuckus ну так там подшипники скольжения, анода важна безусловно, но подшипники как ходили, так и будут ходить
@@AMdvij не скольжения, а качения. Так если покрытие стёрлось, значит там башинг есть на конце штанины, и эта вилка уже как новая не заработает.
@@GeraRuckus Ну это понятно, плюша такого не будет, но работа все равно останется и будет лучше, чем у обычной