I have decided that, after several months of interrupted videos, I will never buy anything from the company that pushes Grammarly. It is the most intrusive ad and interrupts even scientific lectures at crucial moments, thus disturbing one's concentration.
Can some one explain me why is that speaker magnet so strong in the center part expecialy like that aluminum shiny part in the center it behaves nearly identical to neo magnet I put small waster in the center of that thing it took a pry bar to remove small washer that thing in the center does not supose to have north ore south pole in it its adtracted to bouth . So what the hell is that thing exactly??
What is the best way to get the magnets off the speakers without breaking them? Wie kriegt man am besten die Magneten von den Lautsprechern ab ohne das diese kaputt gehen? Qual é a melhor maneira de retirar os ímãs dos alto-falantes sem quebrá-los? Как лучше всего снять магниты с динамиков, не сломав их?
@@slsandaofficial It wasn't really a question to be honest. I've recently separated about 100 magnets from speakers - I'm honestly not joking - I needed a LOT of magnets. At first I looked at RUclips vids that involved blow torches, I thought that sounded too difficult. Through trial and error I discovered it was GLUE that was holding them together - ok, there was magentic attraction also but if that's all there was then a 'thumb' would be fine. What I found is that in 'most' cases a hammer and centre-punch was adequate and maybe a chisel and hammer for the flat plate - No heat needed. Some were VERY VERY stubborn and I split quite a few. I got myself a blow-torch and that made life a lot easier. I would still say though that it is relatively easy to 'liberate' a magnet from a speaker - you just need to know how they are consructed in the first place, which makes them a whole lot easier to de-construct. My point being is that you DID NOT push those plates off with your thumb!! Like you made it look - Cheeky! BIG RESPECT to SL Sanda
@@fullstop6078 I salvage alot of speaker magnets and microwave magnets. I just use a hammer and an old chisel to knock out the metal plate/break the glues bond. I've never had an issue. They usually come apart relatively easily with a good whack. Just make sure the flat of the chisel is against the magnet and the bevel is pushing the plate away; this way you won't break, or crack the magnet.
Better weld the bolt and nuts for 90 degree fix. Sure no movement
I just grabbed an old speaker magnet and upgraded my welder. Great idea 💡 .😂almost should have been obvious
Dfghjk
Выглядит как грязные ногти. А наконечник на провод не судьба поставить? Дальше смотреть не буду.
I have decided that, after several months of interrupted videos, I will never buy anything from the company that pushes Grammarly. It is the most intrusive ad and interrupts even scientific lectures at crucial moments, thus disturbing one's concentration.
O
I like it
Pretty Dang Cool!
Good choice of hypnotic music...kept me watching to the end...plus I love magnets 👉👈
sehr gute idee danke😁😘☕
Nice 👍🏻👍🏻 🇮🇳 || Kuki
Excellent 👌 💡 idea
Can some one explain me why is that speaker magnet so strong in the center part expecialy like that aluminum shiny part in the center it behaves nearly identical to neo magnet I put small waster in the center of that thing it took a pry bar to remove small washer that thing in the center does not supose to have north ore south pole in it its adtracted to bouth .
So what the hell is that thing exactly??
Show
good ideas, but #3 is essentially the same as #1, and #3 is not a speaker magnet.
tonterias
Im too dumb to understand number 1
Ver y good idea !! 👍👍
Turn off background music 🎶🎵
What is the best way to get the magnets off the speakers without breaking them?
Wie kriegt man am besten die Magneten von den Lautsprechern ab ohne das diese kaputt gehen?
Qual é a melhor maneira de retirar os ímãs dos alto-falantes sem quebrá-los?
Как лучше всего снять магниты с динамиков, не сломав их?
Annoying music!!! Left 20 seconds in...
Iam weldar you work super sir 🙏🙏🙏👍👍👍👍👌👌👌👌
ایده فوق العاده عالی بود متشکرم.
Ok
Super
Nice ldea
Мда .....голова ....и руки. Откуда надо.,.!!!!! Маладец
The background music is annoying
#2 is a lot of work for an item that can be bought for $5.
:
I thought the same thing, but, it's still cool to see people make use of amazing talent, and ingenuity.
How the hell did you get that magnet separated from the metal speaker casing? - you can NEVER push them with your thumb!!
Great vid. Very impressive
Good question!
@@slsandaofficial It wasn't really a question to be honest. I've recently separated about 100 magnets from speakers - I'm honestly not joking - I needed a LOT of magnets. At first I looked at RUclips vids that involved blow torches, I thought that sounded too difficult. Through trial and error I discovered it was GLUE that was holding them together - ok, there was magentic attraction also but if that's all there was then a 'thumb' would be fine. What I found is that in 'most' cases a hammer and centre-punch was adequate and maybe a chisel and hammer for the flat plate - No heat needed.
Some were VERY VERY stubborn and I split quite a few. I got myself a blow-torch and that made life a lot easier.
I would still say though that it is relatively easy to 'liberate' a magnet from a speaker - you just need to know how they are consructed in the first place, which makes them a whole lot easier to de-construct.
My point being is that you DID NOT push those plates off with your thumb!! Like you made it look - Cheeky!
BIG RESPECT to SL Sanda
@@fullstop6078 I salvage alot of speaker magnets and microwave magnets.
I just use a hammer and an old chisel to knock out the metal plate/break the glues bond. I've never had an issue. They usually come apart relatively easily with a good whack. Just make sure the flat of the chisel is against the magnet and the bevel is pushing the plate away; this way you won't break, or crack the magnet.
@@elyanae9588 You know what, I reckon that's how I've broken some - the chisel wrong way round.
Great advice.Thank you
@@fullstop6078 it's easily done! But yes always make sure the bevel is pushing the metal plate away :) good luck!
nice
Самодельные магнитные уголки для сварки
👍great 💡idea
nice bro
thanks...very good
Nunca. Se. Vio. La. Coneccin. Del. Electrodo
utility square design
No pratical
Thanks
.
Ok felicitari
Hay quá
Niyamae.sri Lanka
DAMN that music!
ඒක පට්ට 👍👍👍
Recycikling
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Criatividade e vídeo postado e objetivo
These are all the best
O
I am imagining allot of little tiny pores of grinding wheel on it 🤭
Good
Thanks
BRAVO!!!Greetings from ROMANIA!!!!
@Comaritan Mugurel ìj8oniiìì9òóipoòòoòoioii
@Comaritan Mugurel ìj8oniiìì9òóipoòòoòoioii
Parabéns meu nobre 👏
Beautiful idea
Thank you! Cheers!
Parabéns
Awesome. I use to have a smaller one many years ago when i was still in the trade.
Are you sri lankan?
VERY GOOD IDEAS
Many many thanks
Whoo, Excelente gracias 👍🏻👍🏻👍🏻👍🏻
Awesome
Thank you ,your video clip very good idea.
Glad you liked it!
99
Nama ko mirip gan
Good idea
Many many thanks
Car. Air. Con. Magnet. 0peration.
Kool
supper...
Super
BOOOORING
Хрень полная... На 2 электроде нагревается и отваливается, а магнит разрушается. Проверено!
для руского человека все хрень .
Ok, façam isto e vejam a merda que vai dar!
😨 !! Nossaaa !! ! Vocé caíu como porco no lazo !! 😆😆😆 Ta legal !!
👍👍👍
🇧🇦❤️👍
🇪🇨
Superb brother
Thank you so much 😀
bulshit
Imaginea avatarului
..90000. ..
pavadas
This is hacks haa thu some nonsense
Joesphine Nirmala?