Evening Walt, Donny Walker brought that fuel line problem up on one of his videos and also the case cracking on a 592 where the dog is mounted, Husqvarna is going to or has beefed the case up on them under warranty just something to be aware of if your not already.
We will c. Haven't seen a service bulletin yet. I'll report to my channel when there is an official response. But to the line. It is both too long and the material too soft. Choose to cut it until there is a better part. Might use some yellow line until husqvarna does something official.
Bought a 592xp brand new and that same fuel line was kinked, primer bulb would not fill up. Just rotated the line around until finding a spot it wouldn’t kink. All Good now!
The very second you noticed that kinked primer hose I knew it was going to be fixed before the end of the video🤣🤣. That 585 is no slouch but cutting hardwood logs I had to opt for the 592. Smoothest big saw I have ever owned.
Congratulations on your 585 purchase Walt! 10 years ago you needed a nice low hour Stihl 064 ;) The 585 I picked up back in August had the same fuel line issue, but so don't the 592s (plus some). I had hoped the 585 would have been lighter, more like a 064. I agree the 585 is getting very little attention compared to the 592 which is too bad. Buy what you want, something you can enjoy while working hard. I suspect since you have run both the 592 & 585 you don't need me to tell ya you made a good choice :) I am glad you have it on your channel and am looking forward to seeing you put some time on it. 👍
Yeah I have run them both :) And a lot of the competitions saws as well. Honestly prolly like you I really don't need another saw or another anything actually. SO find things of interest to mess with. :) This saw was interesting for a lot of esoteric reasons :) SO I bought it. Now glad I did :)
@@afleetcommand yesterday I was milling a reject ash log on my landing with my MS880 and got to thinking "I have put alot more hours on this saw than I thought I would, the 881 and 3120 both interest me" :) Enjoy life!
Keep up with the nice footwork Walt! Hope to see your videos for years to come and don't want to learn that you got knocked by a rolling log!! Stay well sir and enjoy that new work toy.
Wow! Cool saw Walt. I would match that up with the 550 for liming , and fell and buck with the 585. I'm seventy now so I drop start my big saws. Old truck driver, shoulders both shot. You are the first to showcase the 585 that I have seen. I got a Dolmar 7900 for my big saw and it is great but I like the 365. Got an 8 pin and a ported muffler, she cuts. How long will it take to get the taste of the blue saw out of your mouth. Fun to watch you and learn but not for me. Tell me about that G 888 hey? We know. Love your videos brother.
Agree. I'd modify that somewhat in my opinion, the 550 and its Rev Boost is great for limbing, but the 545 is better for felling and limbing...545 revs plenty fast, runs cooler, and pulls easier to start. Husqvarna makes great saws at 50cc and 72cc plus, but the 400 and 500 Stihl are also great in their displacement class.
Just bought one yesterday. Do you have a recommendation on what oil and at what ratio to run in it? I've been running lucas semi synthetic at 40 to 1 in my 372s but don't know how these new saws are. I've heard their picky.
I was in the local Husqvarna dealer the other day and they had the display out with many saws including the 592xp but curiously no 585xp … I asked the woman behind the counter how much the 585xp was and she looked into her computer screen, click click click and then after a minute proceeded to tell me no such model exists ! Well , cross that dealer off my paper route 😎😝😀
Husqvarna took the 372 back to the market because their was a demand for a carb tuneable saw along side the auto-tunes and in their marketing strategy thats why the 585 is alongside the 592 because a lot of people like to tune their carbs as opposed to auto-tune freedom of choice and thats the way it should be IMHO and thats why I bought a 585 a few months ago and its never missed a beat the funny thing is the fuel lines were spot on for size and I havent heard any complaints yet in the u.k about them.
Just curious why you chose a 585 over 592? Availability or rather not autotune, price would like to know your thoughts. Lots of interesting content on your channel 👍😎
Walt . the more of your videos that i watch , the more i find it quite irritating that no shops here in my area will carry any Husky saws bigger than the 460... you've shown several saws that i would love to pick up, including this one. i have been looking for a saw in the 90 cc class to run a 32inch bar.
Sorry to hear that, for me this saw might be the answer to all those out there who either see Autotune as a tie to a dealer, whether it is or not :) Have a LOT on the plate to explore with this saw. :)
New to your channel. Do u port saws. I have a 562 I wanna work it. I use it for my tree business. And also have a 372 and a 540 top handle. That I’m Looking to get ported. Do you do that and how much
Walt, has ANYONE besides Bob ever talked about putting a 385-390 oil pump on a 372xp. I’m thinking that doing so will solve some oiling problems on a 32” bar even if I need to do a better job of keeping an eye out on the oil level.😊
What do you think of the 585 vs the 390? Do you think they will eventually replace the 390 with the 585 since they’re somewhat similar? Do you have a favorite between the two
It's annoying how the Husqvarna light/Sugihara .050" bars have .058" tips, I keep throwing chains while lopping up tops because of the slop in the tip.
For you? Not cheap enough to justify going 585 v 592. Anyone younger and with less injury history than me, the 592 is the way to go. My reasons are counter intuitive, it's an 86cc saw not a 92. Easier to pull over. Makes good enough power to do what I need, and the really the big difference in parts between the 585 and 592 is cylinder BORE ( same casting ) therefore smaller piston and carb w/o Autotune module. The bigger 592 cylinder will bolt on and I bet someone takes a 585 carb and bolts that on a 592 at some point, everyone wanting to do something unique. :) My goal for that saw is to last past the time I can run it. And its beefy built. Heavy as a result but I like it. :) As LONG as you are hunting the Ported saw option, your heart will be wanting the 592.
@@afleetcommand I want a 592 yes....but... since I have gotten into the ported saws and I have a couple of ported 372s I don't know that I will pay the money for a 592 because I probably won't use it much simply due to the weight difference and we are cutting primarily pine now since going to work contracting for Woodgrain Inc. I like to play with the 395 clone now and then just for fun like in the video the other day. But it was really working me hard for no good reason in this pine... The 372s that Aaron Lynch ported for me will actually best that 395 pretty good right now. I am going to muffler mod the 395 and maybe try to improve the squish and those 2 things in combination with further break in may put it back above the ported saws but I'm sure not enough to justify carrying the weight. Aaron has a good recipe on those 372s. I'm talking super nasty power without burning much more gas. Thanks for the insight!
Bob's feed back is closer to what we see here. Same with the dealer I work with locally. We see this frequently enough for it to be a trend. But I knew this for a while now. I just clipped mine and will prolly use the yellow line. Husqvarna as of this date hasn't put out a service bulletin.
Pretty sad that kinked hose made it's way past manufacturers quality and the dealer if it was preped by them, when you said you would run it for now I let out a laugh 😆 and said yeah I bet he does, Did the service shop say if this is somthing common they are seeing or just kinda a fluke? Anyways another great video 👍👍 with lots of great info.
Yeah common both with 592 & 585. Being a primer line some just run it. But mine was SO kinked, it wouldn't draw the fuel. Actually a "yellow" fuel line would be a better fix. I figured get it out and see if folks and dealers get an updated line from Husqvarna. For me it's more than the length.. The line is too soft a material as well.
@@afleetcommand because of the manual carb. You’re always saying how much you like auto tune and not having to adjust on the carb when running your 562’s and 565
Auto tunes with CST does give u starts, suspect this will get all but the carb mixture settings. That would be stuff like hours run, percentage in the three modes ( idle low and high throttle setting ) etc. I wonder if u get the errors and I don't see how as most are a code based on not just RPM but mixture settings
Donny Walker just did a video on the primer bulb line issue. He advised routing it differently.
I completely and totally agree about the pull start.
Evening Walt, Donny Walker brought that fuel line problem up on one of his videos and also the case cracking on a 592 where the dog is mounted, Husqvarna is going to or has beefed the case up on them under warranty just something to be aware of if your not already.
We will c. Haven't seen a service bulletin yet. I'll report to my channel when there is an official response. But to the line. It is both too long and the material too soft. Choose to cut it until there is a better part. Might use some yellow line until husqvarna does something official.
Bought a 592xp brand new and that same fuel line was kinked, primer bulb would not fill up. Just rotated the line around until finding a spot it wouldn’t kink. All Good now!
Looks like a great saw. Can’t wait to see how you like it.
The very second you noticed that kinked primer hose I knew it was going to be fixed before the end of the video🤣🤣. That 585 is no slouch but cutting hardwood logs I had to opt for the 592. Smoothest big saw I have ever owned.
Congratulations on your 585 purchase Walt! 10 years ago you needed a nice low hour Stihl 064 ;) The 585 I picked up back in August had the same fuel line issue, but so don't the 592s (plus some). I had hoped the 585 would have been lighter, more like a 064. I agree the 585 is getting very little attention compared to the 592 which is too bad. Buy what you want, something you can enjoy while working hard. I suspect since you have run both the 592 & 585 you don't need me to tell ya you made a good choice :) I am glad you have it on your channel and am looking forward to seeing you put some time on it. 👍
Yeah I have run them both :) And a lot of the competitions saws as well. Honestly prolly like you I really don't need another saw or another anything actually. SO find things of interest to mess with. :) This saw was interesting for a lot of esoteric reasons :) SO I bought it. Now glad I did :)
@@afleetcommand yesterday I was milling a reject ash log on my landing with my MS880 and got to thinking "I have put alot more hours on this saw than I thought I would, the 881 and 3120 both interest me" :) Enjoy life!
Have a sneaking suspicion u may see something along those line beginning of next year.
@@afleetcommand I love my 3120 as long as I’m bucking or milling…felling it’s a bit much! Esp. 42”…
Keep up with the nice footwork Walt! Hope to see your videos for years to come and don't want to learn that you got knocked by a rolling log!! Stay well sir and enjoy that new work toy.
Wow! Cool saw Walt. I would match that up with the 550 for liming , and fell and buck with the 585. I'm seventy now so I drop start my big saws. Old truck driver, shoulders both shot. You are the first to showcase the 585 that I have seen. I got a Dolmar 7900 for my big saw and it is great but I like the 365. Got an 8 pin and a ported muffler, she cuts. How long will it take to get the taste of the blue saw out of your mouth. Fun to watch you and learn but not for me. Tell me about that G 888 hey? We know. Love your videos brother.
Agree. I'd modify that somewhat in my opinion, the 550 and its Rev Boost is great for limbing, but the 545 is better for felling and limbing...545 revs plenty fast, runs cooler, and pulls easier to start. Husqvarna makes great saws at 50cc and 72cc plus, but the 400 and 500 Stihl are also great in their displacement class.
Beautiful!!!! 🎉🫵🤙👌🤩mate Merry Christmas and a happy New Year to you and Bob awesome shows 👌👌👍👍🤠
Congrats on the 585! Tinman will be happy for you also! Enjoy Walt
Thanks for sharing with us. Nice comparison s. Stay well.
Just bought one yesterday. Do you have a recommendation on what oil and at what ratio to run in it? I've been running lucas semi synthetic at 40 to 1 in my 372s but don't know how these new saws are. I've heard their picky.
Some of the earlier Stihl M-tronics were picky Husqvarna's not so. AND some discovered the are way selection of two stroke oils matter.
I was in the local Husqvarna dealer the other day and they had the display out with many saws including the 592xp but curiously no 585xp … I asked the woman behind the counter how much the 585xp was and she looked into her computer screen, click click click and then after a minute proceeded to tell me no such model exists ! Well , cross that dealer off my paper route 😎😝😀
Husqvarna took the 372 back to the market because their was a demand for a carb tuneable saw along side the auto-tunes and in their marketing strategy thats why the 585 is alongside the 592 because a lot of people like to tune their carbs as opposed to auto-tune freedom of choice and thats the way it should be IMHO and thats why I bought a 585 a few months ago and its never missed a beat the funny thing is the fuel lines were spot on for size and I havent heard any complaints yet in the u.k about them.
I expect I will have either a different line or one from Husqvarna shortly :)
I found out on mine a 7 spline carb adjuster works well if you line it up right. Mine was lean out of the box too, no primer line kink tho for me.
Nice work Walt. Both the 585 and the 592xp are thin on the ground here in the uk. Have you ran the 592xp yet? Would be an interesting comparison.
Yes I have run a 592 :)
Just curious why you chose a 585 over 592? Availability or rather not autotune, price would like to know your thoughts. Lots of interesting content on your channel 👍😎
A good question. :)
Really boils down to I just wanted one. No more no less
Nice "unboxing" video. Following along with your g395 journey too.
It is 3 lbs lighter, but the 395 doesn’t have a light bar. I know it’s not going to be 3 lbs, but it will be some.
My 592xp was kinked too cut a little bit off and reroute it under the return works well.
Walt . the more of your videos that i watch , the more i find it quite irritating that no shops here in my area will carry any Husky saws bigger than the 460... you've shown several saws that i would love to pick up, including this one. i have been looking for a saw in the 90 cc class to run a 32inch bar.
Sorry to hear that, for me this saw might be the answer to all those out there who either see Autotune as a tie to a dealer, whether it is or not :) Have a LOT on the plate to explore with this saw. :)
New to your channel. Do u port saws. I have a 562 I wanna work it. I use it for my tree business. And also have a 372 and a 540 top handle. That I’m Looking to get ported. Do you do that and how much
Retired. Only for a select few customers who have been with me the last decade
We'll see if you like it better than the 565
Walt, has ANYONE besides Bob ever talked about putting a 385-390 oil pump on a 372xp. I’m thinking that doing so will solve some oiling problems on a 32” bar even if I need to do a better job of keeping an eye out on the oil level.😊
I'll look as soon as I get in the shop.... curious now.
@@afleetcommand thanks Walt.
Very nice video!
You will ike it more with muffler mod, there are gains, unlike the 592..
Best regards!
ike ?
What do you think of the 585 vs the 390? Do you think they will eventually replace the 390 with the 585 since they’re somewhat similar? Do you have a favorite between the two
Hard to ever beat a 390. Such an awesome timeless platform. I grab my 390 Everytime next to my 395
It's annoying how the Husqvarna light/Sugihara .050" bars have .058" tips, I keep throwing chains while lopping up tops because of the slop in the tip.
Affirmative
have you thought about getting a 545? I think that is the only one you are missing now from the none XP 5 series.
Hoping a hopped up first gen 550 will fill that void :)
How much cheaper are those than the 592?
I also agree with you.... I think the blue 395 is much harder to start than an oem 395.
For you? Not cheap enough to justify going 585 v 592. Anyone younger and with less injury history than me, the 592 is the way to go. My reasons are counter intuitive, it's an 86cc saw not a 92. Easier to pull over. Makes good enough power to do what I need, and the really the big difference in parts between the 585 and 592 is cylinder BORE ( same casting ) therefore smaller piston and carb w/o Autotune module. The bigger 592 cylinder will bolt on and I bet someone takes a 585 carb and bolts that on a 592 at some point, everyone wanting to do something unique. :) My goal for that saw is to last past the time I can run it. And its beefy built. Heavy as a result but I like it. :) As LONG as you are hunting the Ported saw option, your heart will be wanting the 592.
@@afleetcommand I want a 592 yes....but... since I have gotten into the ported saws and I have a couple of ported 372s I don't know that I will pay the money for a 592 because I probably won't use it much simply due to the weight difference and we are cutting primarily pine now since going to work contracting for Woodgrain Inc. I like to play with the 395 clone now and then just for fun like in the video the other day. But it was really working me hard for no good reason in this pine... The 372s that Aaron Lynch ported for me will actually best that 395 pretty good right now. I am going to muffler mod the 395 and maybe try to improve the squish and those 2 things in combination with further break in may put it back above the ported saws but I'm sure not enough to justify carrying the weight. Aaron has a good recipe on those 372s. I'm talking super nasty power without burning much more gas. Thanks for the insight!
Good morning everyone
nice new saw !
Thanks 👍
Nice saw
592 are known to come with a kink in the fuel line as well.
Hi, does the 585 have a rev limiter ignition?
of course as it should
Im always looking at power to weight ratio... why i love dolmar
That fuel line is probly the return out of the carb to cycle fuel for the primer bulb
it is
Donnie Walker says one outta five has fuel lines kinked! I like the saw though it should be a good piece for the firewood
Bob's feed back is closer to what we see here. Same with the dealer I work with locally. We see this frequently enough for it to be a trend. But I knew this for a while now. I just clipped mine and will prolly use the yellow line. Husqvarna as of this date hasn't put out a service bulletin.
Pretty sad that kinked hose made it's way past manufacturers quality and the dealer if it was preped by them, when you said you would run it for now I let out a laugh 😆 and said yeah I bet he does,
Did the service shop say if this is somthing common they are seeing or just kinda a fluke?
Anyways another great video 👍👍 with lots of great info.
Yeah common both with 592 & 585. Being a primer line some just run it. But mine was SO kinked, it wouldn't draw the fuel. Actually a "yellow" fuel line would be a better fix. I figured get it out and see if folks and dealers get an updated line from Husqvarna. For me it's more than the length.. The line is too soft a material as well.
What size bar on 585? 28?
24 right now
@@afleetcommand thank you
Why not get the 592? More power and same weight more or less
Because I wanted a 585 :)
@@afleetcommand with a lil work that 585 should put the hurt on a stock 592xp
Kinda surprised you went with the 585 vs 592 as you bring such a proponent of auto tune
Why?
@@afleetcommand because of the manual carb. You’re always saying how much you like auto tune and not having to adjust on the carb when running your 562’s and 565
@@afleetcommand I’m still interested in that computer plug in port for the 585. 😊
@ Mike Gott The man bought what he wanted - what’s your major malfunction bro? Youre always yappin but it’s all sizzle no steak 🥩
My porting guy put a ported 592 cylinder on a 585 and it works great
Hey tinman says good things about you ol boy, where in ny are ya in in vermont, born in granville though
cny :)
Cambridge?
I belive it will tell you how many cold starts also. Or that might be the 500i
Auto tunes with CST does give u starts, suspect this will get all but the carb mixture settings. That would be stuff like hours run, percentage in the three modes ( idle low and high throttle setting ) etc. I wonder if u get the errors and I don't see how as most are a code based on not just RPM but mixture settings
That saw isn’t lean.
Nice saw
Thank you, I think it's going to be a win 4 me :)