@@emily36130 That's some real poetic justice that the rocket motor overperformance plus the unintended deployment led to something named "GO 3" unintentionally going through this torture test at mach 3. I really hope someone at their marketing department is looking at how to use this. They went from a planned, somewhat mediocre "we want a video of our camera sticking out the side of a rocket!" to "our camera got flipped into mach 3 winds so violent that it broke the mount, the zip tie holding it on, and the kevlar line securing it. It then smacked into a rocket fin, fell 4-5 kilometers, smashed into the desert, and the only damage was to a trim piece on the front. Oh by the way, that trim piece is trivially replaceable and we sell various skins to replace it with", that's the kind of product endorsement you can't buy. I'm sure there's a security camera somewhere in insta360's office with this video on it when they got the news that there was a launch failure. ruclips.net/video/euI3v2jpTlI/видео.html
Did a quick google. There are 2 very large military bases, one of which is a naval weapons facility very close to the FAR launch site. And if you look at them from space with SAR satellites like sentinel 1, you can see a variety of shiny spots on the bases from feed back from powerful radio emitters on the ground. If I had to bet, that's the issue with your GPS receivers. They probably have counter-weapon systems running in the area. Though if you check the map of GPS anomalies, there doesn't appear to be one over the area, but the fidelity's of the tool I was using to check isn't good. You'd really need a proper SDR on-site. I bet you find all kinds of noise in the GPS bands and similar military bands. You may need to upgrade to something more mil-spec maybe? Eitherway, cool rocket!
I was just a Joe Shmoe in the infantry. But I’ll tell you that anytime you are near a large military base your cell service is fucked from all the radios from people training, testing gear, etc…not even necessarily a defensive move - just works out that way.
I can back up that problem with GPS. I use a GPS speed and location unit in my car for tracking radiosondes in the Calif desert, and some days the system will not work right or at all. It works worse around china lake. My SDR shows some anomalies at frequency right around the GPS area.
Absolutely could upgrade to some higher quality GPS. Absolutely not under any circumstances will he be using anything mil-spec. The US access controls on military GPS frequencies are insane, even other goverment agencies fail to get access to mil-spec GPS.
After watching this whole video and what you were asked to do for the sponsorship spot, I honestly cannot think of a better product endorsement than this. Not only did it surive all that in almost "perfect" condition, but it still works. That's absolutely amazing to me. In case a GO3 rep is reading this, I know when I need a small camera, your's will be what I pickup.
Please do a MK2 of this. This was not only a great video, fun to watch but also a fantastic sponsor integration in my opinion. The extra challenge to get a cool shot, a fast af rocket and learning about the ways you track a rocket down was just great!
This is a perfect way to show off how durable your cameras are like imagine in an ad stating that their camera can survive a over 1000 feet free fall and can go Mach 3 and still survive.
it all comes down to force. the reason cams like this survive besides being built well is no force. its 35g. this is why your old flashlight with 2 d cells inside "SHATTERS" when you drop it but the pen light just bounces. its all about mass. at 60g's this camera experienced 2kg of relative mass. but a 2kg rocket would experience 120kg of relative mass. BIG difference :-)
The spiral makes me think the rocket was spinning real hard, could the cameras have been pulled out by centrifugal force? Also I love the whistle effect of those camera holes, a whoop of excitement becomes a scream of terror ahaha
They seemed like the rest position was really close to the center of spin, but I'm sure it was a factor that got out of control as soon as a jiggle moved the upper tip of the camera. That backlash was not up to the task.
@@robertsmith2956 one: satellites don't work that way. two: area 51 can be imaged, and eavesdropped on from "not directly overhead" so there's no point, three: ummm conspiracy much?
I reckon that when the second stage started spinning the centrifugal force forced the cameras to fold out prematurely, it'd also explain why the button panel was bent outwards away from the camera body.
Exactly what I was thinking during that final camera frame. You can almost see the bottom camera leaning out of its frame which would make no sense if it was due to G-force or drag! Makes total sense that a centrifugal force could cause them to open up
You managed to make a 24 minute ad and I loved every second. All the simple yet creative engineering ideas you had! I use a Go 2 every day on my motorcycle or surfing or on my dog. They’re amazing little cameras.
Just for reference, my Seagate HDD states that warranty is void if it's exceeded 50g. And that's a mechanical Device with a spinning Disk and delicate arms inside.
I died laughing at the "I also used... An amount... Of black powder". I had to show my coworkers and they also lost it and I think you'll have a few more subscribers off it 😂
You could probably do the same setup for camera deployment with a small modification. Mount a layer of perforated cardstock sealed to the fuselage over where they deploy from, then add a blade or spike to the camera. Camera stays behind aerodynamic shield until deployment, blade or spike rips (or somehow shears it completely away) the cardstock for the shot, and the normal airstream from terminal velocity until shoot deployment should be safe for the current rig. Or, since the faceplate of the camera is removable, print a plate with that will seal the airstream around the camera, but can break away if needed after deployment. All sorts of fun solutions.
This rocket is incredible, the redundancy and strength of the airframe is a testament to your trial and error experience that you’ve gained. I wonder if the top servo mount was flipped 180 if the rocket might’ve survived. Something about that 2nd stage leaving that’s just glorious to watch
Just happened onto this. If you’re an engineer, you’re a very _young_ looking one. I’m just astonished at what you’re accomplishing. This is some very sophisticated rocketry. Many years ago I visited a Goddard Museum in Worcester, MA and was privileged to hold to look through one of his original handwritten note books.
This was the third promo I've seen today for this camera, and by far, your experience with it tells the most amazing story. What a tough little camera!
Damn! That is one hell of a resilient action camera! 60+ G, smacking a carbon fiber knife at Mach 3, falling from that altitude without a parachute, And it still works! I am in awe of this engineering!
I wonder if anyone has shot one yet. The carbon fiber knife at mach 3 might well compare, although the force of a bullet is much more directed and confined so may ultimately be more destructive.
Insta360 is going to owe you an ownership stake for this. That has to be one of the best and most thrilling product endorsements I've ever seen, and considering endorsements usually are annoying and necessary evil, that is a hell of an accomplishment. And kudos to Insta360 for making a camera that can take Mach 3+ at an altitude that would have melted an SR-71, even if for just a few seconds.
My daughter and I have been building model rockets for the past few months and I have been making and printing fin guides for them. I was thinking it was overkill, but now that I see you doing it I feel a bit better. Though we are working on very different skill levels.
Nothing is overkill with model rockets! Everything you do, no matter how seemingly insignificant, will have massive effects on the final performance of your rocket! Best of luck!
Yeah! Sponsorships like this help a ton, and finding weird ways to pair up with companies while still doing test flights makes that ultimate goal much more achievable :)
@@BPSspaceis there a way on your side to mark sponsored video in the tagging and everything, it feels a lot different from your other product integrations, and not in a nice fuzzy kind of way
@@BPSspace Beyond what I hope is REALLY good money to you for being such a great sponsorsed episode, Insta360 should literally sponsor you - five year term, use their gear in all your projects, and prominent featuring in your videos (non-exclusively, ie., you can still do other sponsored segments for non-competitors). Insta - I'd say that's $100K a year! I've used Go 2s for awhile now, love the camera. Have been eyeing the 3, and this vid is convincing me I need it. The ability to use the action pod thing to connect and control the camera seems much improved over using the phone app, which ties up your phone.
I love it when a successful marketing campaign is the result of unplanned, unscripted outcomes. No lies, no gimmicks, no false advertising. Just natural storytelling. Because if the product is good enough, lies and deceit are not needed. I’ll have the GO camera on my shopping list 👌🏻👏🏼
I thought this camera might be a bit gimmicky, but this camera is just next level rugged, and i dare to say that it is tougher than a Nokia, hats of to insta 360 guys for making a tiny camera which included all accessories in a box... I know that if i want a camera size of my thumb which can survive no matter what adventure i go to, i will buy this thing...
Really Informative and has unique content, the simplicity of how the process is shown and explained is truly admirable. Videos like these remind me of the true power of a platform like RUclips.
I used those comspec trackers on my pets for like 10 years. Imagine seeing someone outside your house with one of those things. My neighbors were all very cool about it though. And sometimes a cat would come home without their collar so I'd have to ask neighbors to let me poke around their yard with this beeping antenna thing trying to save like 50 bucks on a new collar.
Eeby Dweeby 2 for sure. Next time instead of using servos to fold out the cameras, make a spring loaded lever that is locked by a sliding mechanism that wint allow it to bend out. This way there wont be a servo's worth of power keeping the cameras inside the rocket until it is time to deploy them. Should make the mechanism immune to extreme g's, including rotational.
When I chamfer the edges of the fins, I always do them all at the same time by staggering them and clamping them together before sanding. I just lay them on a flat surface, edge down, and then angle the whole set so that the edges still touch the surface, then I clamp. That method ensures that they are all the same.
the more astonishing thing is that you learn all these on your own from scratch, i want to ask you that from where do you learn all these things, also how you learned aeronautical engineering along with electronics engineering because you have designed great rockets but also the brains of it heck you have developed your own micro controller you are really hardworking much much more than i'm, hats off.
That would be extremely dangerous. If they hit each other they would immediately mutually break up, which if it happened early enough in flight, could cause injury to people nearby. Furthermore, assuming they don't hit each other, they would experience some amount of roll during the flight, so tracking would be required. They also might travel vertically at different rates which would require the camera to point up/down inside the rocket, which may or may not cause turbulence, don't quote me on that one. Although it's an extremely cool idea, it's very complicated, unsafe, and impractical. Believe me, I would love to see that shot, but it can't be done.
If you name the rocket EBDB next time that could stand for: 1. Experimental Boosted Delivery Vehicle 2. Enhanced Ballistic Dual Burner 3. Exploration Beyond Deep Boundaries 4. Emergency Beacon Deployment Bot (if things get hot)
In the next rocket it would probably be better to have both cameras' hinges be at the top of their mounts, so that if they flop into the airstream they would get pushed back in
Seems like avoiding the "suicide door" style of camera deployment might have helped. The negative Gs might still be a problem, but if both cameras had to flip up instead of one flipping down, any aerodynamic forces should shove them back in... Might break the servo in the process, but maybe save the rocket. Maybe.
Do you think the open portal on the side of the rocket could have produced some low pressure as the supersonic air passed over it? Possibly pulling the camera out into the air stream? Rather than the change in G forces? Or possibly some vortexes inside the portal compartment, with the same effect?
If you do end up making Eeby Deeby 2, I think just having a sliding door controlled by a high throw servo would work fine for the cameras. They wouldn't need high torque and surely there's room for two more flat servos in there, right?
Have you tried using a simple wideband SDR to check for EMI at the launch site? (11:22) You can compare wideband analysis from home to that of the launch site and figure the EMI source. I wonder about the 360 if it would survive a drop from onboard the ISS as well; Marvelous sounds it got there haha!! Can't wait to see a second trial in this shot.
If you try to drop it from the ISS it will stay in orbit for weeks or months and at least it battery will die very quickly because of the extreme temperatures and also vacuum...
9:17 That is my worst nightmare when it comes to integrating LiPos into any vehicle. Accidental punctures/cuts make the battery *wayyy* to excited. Also, I would probably buy this camera, after seeing it (mostly) survived from a Mach 3+ flight and a 4 km free fall. PS: The whoop of pure joy from the camera turning into a high-pitched scream as the camera knows what's coming, is pure music to my ears.
So you need a sheathe that can slide up and down to allow the camera to move out. Or maybe to rotate open? Something that can first trigger so the camera can’t fold out under the stress. Maybe a slit in it so the lenses still sees out the whole time. It’s all impressive what you’ve got here. Good work man!
I've had 3 rockets break up at mach 2.4 to 2.7 (calculated at sea level). The last rocket recorded 6-dof inertial recordings. Analysis shows that as the rotational rate approached the axial dynamic resonance the rocket went sideways. An off-axis CG likely caused coupling between the rotation and AOA causing rocket to nutate. When the AOA of the fins hit about 10° the rocket instantly went went sideways. This started less than .5 second before brake up. The avionics had a gentle ride down while the motor stabilized and continued to apogee and a ballistic recovery. It made a 1.1m x 75mm hole in the playa. Only the slightest blip in the motor's trajectory could be seen from the ground.
Absolutely do another one. Im not in to model rockets but i do like watching you guys blast these powerful rockets off. Good job and thanks for not making your video too boring by dragging it out to long.
It would be educational from a testing perspective to do a flight with the camera holes covered so that the aerodynamics of the cameras are definitely not effecting the rest of the rocket, although this would of course lose the cool footage. Alternatively, if you could have the cameras attached to a panel that is flush to the rocket until the cameras deploy, you could probably achieve the same improved aerodynamic result and also get cool footage. I cant help but think that Mach 3 wind past the camera in its retracted position had serious aerodynamic impact and as you said, once they protruded a tiny bit into the airstream it was 'game over' for the servo retention/deployment mechanism. I suspect that you were having a Bernoulli effect over the lens being raised relative to the rest of the camera body with consequential 'lift' or pull on the camera against the retention mechanism with maximum torque applied by the lift against the servo lever because the servo lever was at the end away from the lens. Cool Stuff!!
I'm such a huge fan. I'm currently upgrading a sous vide cooker that I made in college. Your videos remind me to stay passionate, even if I'm not doing things as cool as rocketry! =)
how to make stuff faster: Paint makes the Rocket go faster RGB makes the PC faster Stickers, well, they make anything faster (always a good option). So, what do we learn from that? Color is speed
love the continuing development of the many uses for blue tape also, all of this furthers my appreciation for the amount of engineering going on in NASA
The way this video is produced is a masterclass in RUclips entrepreneurship. And then it hit me: you created a media company that will fund an actual rocket company. This is brilliant and I want to be an early investor when the time comes.
I have a super simple idea to latch the camera or any other tip out device. Make an in place "spring" on the camera that pushes the camera in. This give you some built in slop in the camera movement. Rigidly attach a hook that will catch the top of the camera tilt mechanism. As the servo draws in, the camera will be full retract first and the slop will allow the catch to be pulled into place. A few grams more but mission saving....maybe. ;o)
Well, they say that you learn more from a failure than you do from a success. Case in point. But talk about the torture test of your electronics! Nice work! And yeah, you should build a Block 2 version.
Really pushing GO 3 to its limits 🚀
Gotta rebrand it to GO Mach 3
People when some rando gets more likes then a good camera company
its go model 3 not go MACH 3 bps. :-) hehehe
@@emily36130 That's some real poetic justice that the rocket motor overperformance plus the unintended deployment led to something named "GO 3" unintentionally going through this torture test at mach 3. I really hope someone at their marketing department is looking at how to use this. They went from a planned, somewhat mediocre "we want a video of our camera sticking out the side of a rocket!" to "our camera got flipped into mach 3 winds so violent that it broke the mount, the zip tie holding it on, and the kevlar line securing it. It then smacked into a rocket fin, fell 4-5 kilometers, smashed into the desert, and the only damage was to a trim piece on the front. Oh by the way, that trim piece is trivially replaceable and we sell various skins to replace it with", that's the kind of product endorsement you can't buy. I'm sure there's a security camera somewhere in insta360's office with this video on it when they got the news that there was a launch failure. ruclips.net/video/euI3v2jpTlI/видео.html
This would be great to put on an additional comments section for the camera
I'd love to see the camera engineer's reaction to this
Engineer POV: Oh damn, I'm not paid nearly enough
Accountant's POV: tell the engineers we could probably cut back a bit on the safety factor here...
Marketing POV: do you think we can sell this to NASA?
Intern POV: We need to make TikToks about this.
Right? That engineer is doing their own flex right now.
The camera surviving that flight is far better marketing material than that camera shot would have been! Awesome video as always!
It's a small plastic object with low terminal velocity falling into dry grass. Any similar camera would survive.
@@chat-gpt-bot Yes, any camera with similarly well engineered design and robust construction.
@@chat-gpt-bot true
@@chat-gpt-botit also survived when it pulled over 10 Gs
@@NapoleonBonaparte3 isnt really that much
Did a quick google. There are 2 very large military bases, one of which is a naval weapons facility very close to the FAR launch site. And if you look at them from space with SAR satellites like sentinel 1, you can see a variety of shiny spots on the bases from feed back from powerful radio emitters on the ground. If I had to bet, that's the issue with your GPS receivers. They probably have counter-weapon systems running in the area. Though if you check the map of GPS anomalies, there doesn't appear to be one over the area, but the fidelity's of the tool I was using to check isn't good. You'd really need a proper SDR on-site. I bet you find all kinds of noise in the GPS bands and similar military bands. You may need to upgrade to something more mil-spec maybe? Eitherway, cool rocket!
I was just a Joe Shmoe in the infantry. But I’ll tell you that anytime you are near a large military base your cell service is fucked from all the radios from people training, testing gear, etc…not even necessarily a defensive move - just works out that way.
IT IS CALLED GPS JAMMERS.... EVEN FOR EYES INTEH SKY
I can back up that problem with GPS.
I use a GPS speed and location unit in my car for tracking radiosondes in the Calif desert, and some days the system will not work right or at all.
It works worse around china lake.
My SDR shows some anomalies at frequency right around the GPS area.
Absolutely could upgrade to some higher quality GPS. Absolutely not under any circumstances will he be using anything mil-spec. The US access controls on military GPS frequencies are insane, even other goverment agencies fail to get access to mil-spec GPS.
@@styxrakash4639it's also cuz a lot of the buildings are really old and use a lot of heavy material that fucks up signal
After watching this whole video and what you were asked to do for the sponsorship spot, I honestly cannot think of a better product endorsement than this. Not only did it surive all that in almost "perfect" condition, but it still works. That's absolutely amazing to me. In case a GO3 rep is reading this, I know when I need a small camera, your's will be what I pickup.
Please do a MK2 of this. This was not only a great video, fun to watch but also a fantastic sponsor integration in my opinion. The extra challenge to get a cool shot, a fast af rocket and learning about the ways you track a rocket down was just great!
100% agreed, such an interesting design challenge
The rocket flys or my subscription dies.
me too
And even if that doesn't work out, Eeby Deeby Threeby has a nice ring to it.
We for sure need a 2 Eeeby 2 Deeby.
This is a perfect way to show off how durable your cameras are like imagine in an ad stating that their camera can survive a over 1000 feet free fall and can go Mach 3 and still survive.
it all comes down to force. the reason cams like this survive besides being built well is no force. its 35g.
this is why your old flashlight with 2 d cells inside "SHATTERS" when you drop it but the pen light just bounces. its all about mass.
at 60g's this camera experienced 2kg of relative mass. but a 2kg rocket would experience 120kg of relative mass. BIG difference :-)
Too bad they didn't mount an underwater version of them on the Titan sub.
terminal velocity will be low, though.
@@nerys71yeah it's also why an ant can easily survive falling from a building, an, an elephant can't
@@nilaksh007 exactly 💯
this man simply does not stop. by the time I've finished 1 video there's another that's even better!
Don't get too used to it, soon I'll become a Garage Gremlin™ again and go deep into another build phase :P
@@BPSspace but this time you will be live streaming the whole time. ;)
@@BPSspacewen orbital?
@@codemonkey2k5yea, I don't think he will.But I really wish he would.
Get Minions skins screaming for the cameras. I love my Go2!
The spiral makes me think the rocket was spinning real hard, could the cameras have been pulled out by centrifugal force? Also I love the whistle effect of those camera holes, a whoop of excitement becomes a scream of terror ahaha
This seems very very likely and something i'm surprised he didn't consider
They seemed like the rest position was really close to the center of spin, but I'm sure it was a factor that got out of control as soon as a jiggle moved the upper tip of the camera. That backlash was not up to the task.
i didn't see a lot of spin but i think of the un-aerodynamic design of the camera hoe and air drag
he should make a cover for each camera holes
That PoV shot of breaking the sonic barrier is cool as hell
That camera scream at 22:33 is hilarious... It turns from excitement at 22:24 to horror hahah
yeah i was laughing so hard at this
I thought it was a person at first 😂😂😂 "whoooooooooooooo!"
It's the United States of WOOOO!
*sad rocket noises* :(
*HELLLPP MEEEEEEEEE AUUGH!!* 🤣
The reason it works in your back yard and not at FAR, is that Murphy lives at FAR, and he loves the smell of solid rocket motors.
I mean, fair, they do smell most excellent - both burned and unburned
"The Government" :)
Area 51 demands all satellites go around it. so your in the zone as they get back on path.
@@robertsmith2956 one: satellites don't work that way.
two: area 51 can be imaged, and eavesdropped on from "not directly overhead" so there's no point,
three: ummm conspiracy much?
@@stevevernon1978 prove it. fly one over areas 51 and take pictures.
I reckon that when the second stage started spinning the centrifugal force forced the cameras to fold out prematurely, it'd also explain why the button panel was bent outwards away from the camera body.
Exactly what I was thinking during that final camera frame. You can almost see the bottom camera leaning out of its frame which would make no sense if it was due to G-force or drag! Makes total sense that a centrifugal force could cause them to open up
that, or the high air velocity would create a low-pressure zone which would suck the camera outwards
You managed to make a 24 minute ad and I loved every second. All the simple yet creative engineering ideas you had!
I use a Go 2 every day on my motorcycle or surfing or on my dog. They’re amazing little cameras.
The sponsor skip guys had a really difficult job with this video, props to you guys, thanks for the great work 👍
SponsorBlock is crowdsourced but yeah it went hog wild on this vid lol
Mach 3 is a good benchmark for how tough your cameras are, but being able to say it survived 61+ g's of acceleration is more impressive to me
For real, the camera kept going through forces that made the specialized flight controller hardware tap out.
61g measured plus how ever many it pulled at a supersonic (and really the better part of halfway to hypersonic) uncommanded ejection
Just for reference, my Seagate HDD states that warranty is void if it's exceeded 50g. And that's a mechanical Device with a spinning Disk and delicate arms inside.
@@AngeEinsteinyou sure its 50gs and not 5gs
@@pineapplepizza5733 I'm sorry, I remembered it wrong. I just crawled under my desk and looked and it is 350Gs
my dude you CRUSHED IT
nah he dind't
at least not his camera
@@arctrix765😂
The R2-D2 scream from the camera is just so perfect.
Can you imagine the advertising for the go 3. From a gentle stroll to Mach 3, we will capture every moment.
I watch YT everyday, this is my favorite new channel this year! Binge watching as am amateur rocket and organic chemist.
Wow, what a unique use case for these tiny Go 3 cameras! 🙂Wish I'd never lost my Go 2🤣 Nice one as always, Joe!
I died laughing at the "I also used... An amount... Of black powder". I had to show my coworkers and they also lost it and I think you'll have a few more subscribers off it 😂
The shot of it looking at the other camera had me absolutely dying LMAOOO
You never cease to entertain us.
Bro fighting air resistance.
You could probably do the same setup for camera deployment with a small modification. Mount a layer of perforated cardstock sealed to the fuselage over where they deploy from, then add a blade or spike to the camera. Camera stays behind aerodynamic shield until deployment, blade or spike rips (or somehow shears it completely away) the cardstock for the shot, and the normal airstream from terminal velocity until shoot deployment should be safe for the current rig. Or, since the faceplate of the camera is removable, print a plate with that will seal the airstream around the camera, but can break away if needed after deployment. All sorts of fun solutions.
Your advertiser must be super happy with this video. This is the best integration of an advertiser into a video that I've ever seen.
Thank you insta 360 you chose the right channel to sponsor your product!!
Just as good as someone jump from space before~
Never clicked in a video so quick in my life
quickest click wr
Fr
Like daily milk
This rocket is incredible, the redundancy and strength of the airframe is a testament to your trial and error experience that you’ve gained. I wonder if the top servo mount was flipped 180 if the rocket might’ve survived. Something about that 2nd stage leaving that’s just glorious to watch
I can't believe how far this hobby has come since I first launched an Estes Alpha in 1979! Great stuff! Yes, it needs to fly again!
Just happened onto this. If you’re an engineer, you’re a very _young_ looking one. I’m just astonished at what you’re accomplishing. This is some very sophisticated rocketry. Many years ago I visited a Goddard Museum in Worcester, MA and was privileged to hold to look through one of his original handwritten note books.
This was a super cool flight and I know you'll nail the next two stager!
This was the third promo I've seen today for this camera, and by far, your experience with it tells the most amazing story. What a tough little camera!
Damn! That is one hell of a resilient action camera!
60+ G, smacking a carbon fiber knife at Mach 3, falling from that altitude without a parachute, And it still works!
I am in awe of this engineering!
I wonder if anyone has shot one yet. The carbon fiber knife at mach 3 might well compare, although the force of a bullet is much more directed and confined so may ultimately be more destructive.
At last, a successor to the nokia.
I ❤ how this camera stabilizes recording against ground so the rocket spins in the middle of the record instead of the whole world around it.
Insta360 is going to owe you an ownership stake for this. That has to be one of the best and most thrilling product endorsements I've ever seen, and considering endorsements usually are annoying and necessary evil, that is a hell of an accomplishment. And kudos to Insta360 for making a camera that can take Mach 3+ at an altitude that would have melted an SR-71, even if for just a few seconds.
My daughter and I have been building model rockets for the past few months and I have been making and printing fin guides for them. I was thinking it was overkill, but now that I see you doing it I feel a bit better. Though we are working on very different skill levels.
Nothing is overkill with model rockets! Everything you do, no matter how seemingly insignificant, will have massive effects on the final performance of your rocket! Best of luck!
How to help finance a space shot: Step 1 - do a sponsored video. I gotta say, this is an amazing pairing though. Everybody wins here.
Yeah! Sponsorships like this help a ton, and finding weird ways to pair up with companies while still doing test flights makes that ultimate goal much more achievable :)
@@BPSspaceis there a way on your side to mark sponsored video in the tagging and everything, it feels a lot different from your other product integrations, and not in a nice fuzzy kind of way
@@BPSspace Beyond what I hope is REALLY good money to you for being such a great sponsorsed episode, Insta360 should literally sponsor you - five year term, use their gear in all your projects, and prominent featuring in your videos (non-exclusively, ie., you can still do other sponsored segments for non-competitors). Insta - I'd say that's $100K a year!
I've used Go 2s for awhile now, love the camera. Have been eyeing the 3, and this vid is convincing me I need it. The ability to use the action pod thing to connect and control the camera seems much improved over using the phone app, which ties up your phone.
Hello this is the FAA…
im not picking up sorry my cat is sick and im really busy i cant talk
@@BPSspace@dmacpher as the cat I can confirm I’m ill
@@Will-uf7jt😂
@@BPSspaceas the vocal chords, i can confirm i cant talk.
I'm trying to 3d print a 2 stage rocket using two F15 motors. Any advice?
I love it when a successful marketing campaign is the result of unplanned, unscripted outcomes. No lies, no gimmicks, no false advertising. Just natural storytelling. Because if the product is good enough, lies and deceit are not needed. I’ll have the GO camera on my shopping list 👌🏻👏🏼
I thought this camera might be a bit gimmicky, but this camera is just next level rugged, and i dare to say that it is tougher than a Nokia, hats of to insta 360 guys for making a tiny camera which included all accessories in a box... I know that if i want a camera size of my thumb which can survive no matter what adventure i go to, i will buy this thing...
sex
Really Informative and has unique content, the simplicity of how the process is shown and explained is truly admirable. Videos like these remind me of the true power of a platform like RUclips.
I used those comspec trackers on my pets for like 10 years. Imagine seeing someone outside your house with one of those things. My neighbors were all very cool about it though. And sometimes a cat would come home without their collar so I'd have to ask neighbors to let me poke around their yard with this beeping antenna thing trying to save like 50 bucks on a new collar.
This was awesome to witness and be a part of the recovery effort! Ebby Deeby for life!
Insane sponsorship!!! Definitely gonna get me an insta 360! This told me alone how good of a product and company they are!!!
Eeby Dweeby 2 for sure. Next time instead of using servos to fold out the cameras, make a spring loaded lever that is locked by a sliding mechanism that wint allow it to bend out. This way there wont be a servo's worth of power keeping the cameras inside the rocket until it is time to deploy them. Should make the mechanism immune to extreme g's, including rotational.
When I chamfer the edges of the fins, I always do them all at the same time by staggering them and clamping them together before sanding. I just lay them on a flat surface, edge down, and then angle the whole set so that the edges still touch the surface, then I clamp. That method ensures that they are all the same.
Yeah. I would do it this way or not at all. If not done perfectly they will steer you.
the more astonishing thing is that you learn all these on your own from scratch, i want to ask you that from where do you learn all these things, also how you learned aeronautical engineering along with electronics engineering because you have designed great rockets but also the brains of it heck you have developed your own micro controller you are really hardworking much much more than i'm, hats off.
22:23 damn that camera is excited to be on a rocket
...And then it wasn't...
So freakin cool
HI JESUS
jesus loves rockets
Wonder if there is a Prophet Muhammad or if it’s just Christian’s who get poked fun at on social media.
Lol the noise from the 360 cam after launch is hilarious. It’s like it’s screaming to it’s near death experience
7:14 Speaking of over-complication (which I think you might like as a challenge xD), maybe try some synchronized rockets looking back at each other? 👀
That would be extremely dangerous. If they hit each other they would immediately mutually break up, which if it happened early enough in flight, could cause injury to people nearby. Furthermore, assuming they don't hit each other, they would experience some amount of roll during the flight, so tracking would be required. They also might travel vertically at different rates which would require the camera to point up/down inside the rocket, which may or may not cause turbulence, don't quote me on that one. Although it's an extremely cool idea, it's very complicated, unsafe, and impractical. Believe me, I would love to see that shot, but it can't be done.
Ok the drill cam was way cool than I expected it to be.
If you name the rocket EBDB next time that could stand for:
1. Experimental Boosted Delivery Vehicle
2. Enhanced Ballistic Dual Burner
3. Exploration Beyond Deep Boundaries
4. Emergency Beacon Deployment Bot (if things get hot)
#4
that's my vote
Extremely Badly Determined Black-powder.
Extra-terrestrial Bad Day Bringer. Dude hit a UFO with his rocket.
This was one of the coolest sponsorships I've ever seen. Not only was it perfect for this channel, but man is that an awesome little product.
It warmed my heart to see your beeper.
In the 80’s, I was stripping down smoke detectors to constantly scream as locators.
you dont have to be a rocket scientist to realize how good these videos are
"For the first time in my life, I used blue tape for its intended purpose." 😆
In the next rocket it would probably be better to have both cameras' hinges be at the top of their mounts, so that if they flop into the airstream they would get pushed back in
This should actually work since they are 360° cameras, they can be facing the same orientation and still record each other.
Seems like avoiding the "suicide door" style of camera deployment might have helped. The negative Gs might still be a problem, but if both cameras had to flip up instead of one flipping down, any aerodynamic forces should shove them back in... Might break the servo in the process, but maybe save the rocket. Maybe.
Eeby Deeby reminds me of the noise made by a robot (named Twiki) on the TV sci-fi show Buck Rogers in the 25th Century from '79.
You would be correct, although the original EBDB meme is a panel of the comic with Buck and Twiki in a compromising position.
This man's relentless creativity knows no bounds. Just as I finish one video, another even more captivating masterpiece awaits!
Do you think the open portal on the side of the rocket could have produced some low pressure as the supersonic air passed over it? Possibly pulling the camera out into the air stream? Rather than the change in G forces? Or possibly some vortexes inside the portal compartment, with the same effect?
If you do end up making Eeby Deeby 2, I think just having a sliding door controlled by a high throw servo would work fine for the cameras. They wouldn't need high torque and surely there's room for two more flat servos in there, right?
Doors, or even just a pin that lock in the cameras. Then have the camera on a spring-loaded mount which folds out when unlocked.
Honestly probably among my favorite sponsoring of a video, it's a great collab which is cool for everyone involved!
Have you tried using a simple wideband SDR to check for EMI at the launch site? (11:22) You can compare wideband analysis from home to that of the launch site and figure the EMI source.
I wonder about the 360 if it would survive a drop from onboard the ISS as well; Marvelous sounds it got there haha!! Can't wait to see a second trial in this shot.
If you try to drop it from the ISS it will stay in orbit for weeks or months and at least it battery will die very quickly because of the extreme temperatures and also vacuum...
The ultimate drop camera drop test. No one else could have achieved that.
I can’t wait for the space shot. Shits gonna be insane
9:17 That is my worst nightmare when it comes to integrating LiPos into any vehicle. Accidental punctures/cuts make the battery *wayyy* to excited. Also, I would probably buy this camera, after seeing it (mostly) survived from a Mach 3+ flight and a 4 km free fall. PS: The whoop of pure joy from the camera turning into a high-pitched scream as the camera knows what's coming, is pure music to my ears.
It must feel good having companies reach out to you for specific rocket based projects. Nice job!
How do you keep making better and better videos every time
Did Elon musk visit your mom some 25 years back.
Woahhhh
Is that a real question
So you need a sheathe that can slide up and down to allow the camera to move out. Or maybe to rotate open? Something that can first trigger so the camera can’t fold out under the stress. Maybe a slit in it so the lenses still sees out the whole time. It’s all impressive what you’ve got here. Good work man!
One of your best videos to date, really great! The sound of acceleration on stage 2 was wild! Glad you found 1 of the cameras.
It's gotta be great to build something and see it work. That's a great rocket and one helluva camera.
Always love the debriefs with lessons learned. Keep em flying.
I've had 3 rockets break up at mach 2.4 to 2.7 (calculated at sea level). The last rocket recorded 6-dof inertial recordings. Analysis shows that as the rotational rate approached the axial dynamic resonance the rocket went sideways. An off-axis CG likely caused coupling between the rotation and AOA causing rocket to nutate. When the AOA of the fins hit about 10° the rocket instantly went went sideways. This started less than .5 second before brake up. The avionics had a gentle ride down while the motor stabilized and continued to apogee and a ballistic recovery. It made a 1.1m x 75mm hole in the playa. Only the slightest blip in the motor's trajectory could be seen from the ground.
Absolutely do another one. Im not in to model rockets but i do like watching you guys blast these powerful rockets off. Good job and thanks for not making your video too boring by dragging it out to long.
It would be educational from a testing perspective to do a flight with the camera holes covered so that the aerodynamics of the cameras are definitely not effecting the rest of the rocket, although this would of course lose the cool footage. Alternatively, if you could have the cameras attached to a panel that is flush to the rocket until the cameras deploy, you could probably achieve the same improved aerodynamic result and also get cool footage. I cant help but think that Mach 3 wind past the camera in its retracted position had serious aerodynamic impact and as you said, once they protruded a tiny bit into the airstream it was 'game over' for the servo retention/deployment mechanism. I suspect that you were having a Bernoulli effect over the lens being raised relative to the rest of the camera body with consequential 'lift' or pull on the camera against the retention mechanism with maximum torque applied by the lift against the servo lever because the servo lever was at the end away from the lens. Cool Stuff!!
Really pushing GO 3 to its limits . my dude you CRUSHED IT.
I'm such a huge fan. I'm currently upgrading a sous vide cooker that I made in college. Your videos remind me to stay passionate, even if I'm not doing things as cool as rocketry! =)
how to make stuff faster:
Paint makes the Rocket go faster
RGB makes the PC faster
Stickers, well, they make anything faster (always a good option).
So, what do we learn from that?
Color is speed
as a slimecicle fan, this is the greatest thing i have ever seen
Those high altitudes are not cheap to attain.
Good luck on even higher!
Love the tracking and avionics packages.
Super cool flight! Can't wait to see the second version!
Definitely do a MK2, the fact that camera survived a rocket disintegrating at Mach 3.1 with footage intact is the best ad ever.
This guy is awesome!! Bravo!!
Excellent! I want a whole bag of those cameras!
love the continuing development of the many uses for blue tape
also, all of this furthers my appreciation for the amount of engineering going on in NASA
Describing a lipo fire as a battery getting so happy it released smoke is my new favorite way to talk about the scariest thing ever
Definitely need an EEBY DEEBY II! Great video. Enjoyed the overview, and the story.
This is the coolest commercial for a GoPro I've ever seen
This is the greatest product promo I've ever seen 👏🏻🙌🏻
You do a sequel, my vote is make it a 3 stage rocket in the grand tradition of Kerbal Space Program! MOAR BOOSTARS!
The way this video is produced is a masterclass in RUclips entrepreneurship. And then it hit me: you created a media company that will fund an actual rocket company. This is brilliant and I want to be an early investor when the time comes.
That's awesome!
Insta360 better be paying you a lot for such a raving review!
I usually do not watch ads for anything..... but that little camera is pretty cool. Seems well thought out.
Excellent performance, planning and construction!
I have a super simple idea to latch the camera or any other tip out device. Make an in place "spring" on the camera that pushes the camera in. This give you some built in slop in the camera movement. Rigidly attach a hook that will catch the top of the camera tilt mechanism. As the servo draws in, the camera will be full retract first and the slop will allow the catch to be pulled into place. A few grams more but mission saving....maybe. ;o)
Fantastic video…the most fun rocket video I have seen. Great job. Will be looking forward to more!
Well, they say that you learn more from a failure than you do from a success. Case in point. But talk about the torture test of your electronics! Nice work! And yeah, you should build a Block 2 version.