Mac Gyver WOULD CRY WATCHING THIS GUY. HE GOT MORE THAN A VICTORINOX. LOOKING AT ALL OF HIS PROJECTS, THIS GUY IS NO DOUBT A GENIUS. NOT ABOUT WHAT HE HAS MADE BUT HOW HE MADE THEM. ONE OF WORLD'S BEST CHANNEL.
My question is: how much would it cost to buy all the parts and build it from scratch? Because this looks quite good and with some design improvements can actually be very marketable.
@@shaileshkullal11 Hi Shail... Not sure if this was a typo but tysres is spelled with an i, so the correct spelling is tires. Also choise is spelled with a c, so the correct spelling is choice.
You sir are a boss... I am but an apprentice wanting your skills. I know its easy to follow but your boss skills are so creative you make it look so simple. Thank you very much for sharing your super powers. :D
Helpful tip: fill the tubes with sand and close the ends before bending them. The sand makes sure you don’t collapse the tube like you did on this bike. When your done just empty out the sand
When you guys go to the bike foot-rest collection all of you have at home, just make sure you pick the two that match. Same goes for the brake handles, dont just pick any two from your spares in the garage somehwere, they should match.
LOVE THIS GUY AND HIS LOVELY FAMILY! I HOPE HE IS GETTING PROPER ADVERTISEMENT MONIES FROM RUclips THOUGH! RUclips IS WRETCHED! I COULDNT EVEN KEEP COUNT OF HOW MANY ADVERTISEMENTS RUIN THE VIEW! THANKS CC! WHAT YOU DO IS GREAT. WHAT RUclips DOES?? RIDICULOUS!
Good job, you are always creative, but in this work I forgot an important thing is to put the wheels cover, especially the rear wheel. It is unreasonable to find all the roads without water, and when you pass by, you will find your clothes from the back are worn out. You did not leave it, so I loved joking with you. Thank you Excellent work .
this is a result of YEARS of part and tool acquisition....i see thousands in tools alone,many thousands.the parts used would be close to a grand or more,then you need mechanical apptitude
*Very good quality work you make Sir ! :) I can see this is not the first electric scooter you have assembled ;) I noticed you were pulling "stock," pre-manufactured electric scooter parts off of your shelves :) I think those parts are plentiful and cheap in your part of Asia.*
If I am late for work or if my car is out of fuel I can simply call this guy and instead of walking I will wait 29 minutes 😂 for a nice transport Love from Zimbabwe 💚😣💙🙏
Desde España quiero felicitarte por todos los vídeos tan buenos que haces....es un placer ver como construyes desde cero cualquier vehículo sin planos y sin prácticamente ayuda en muchos de ellos. Un saludo
Impressive! But so, you can make some easy modifications. There are some space for luggage case in a back, over rear wheel, and so you can add front and back light for night driving. And then it would really became electric motorcycle
A Brake Light and head lamp; The battery box could have used an external charging port; the battery box hinges anchors should have been screws or straps to restrict battery movement! you are a better craftsman than I,, Keep up the great videos!!
Waiting in excitement, to see part 2, just finished similar trike of same specification, fat tires like yours, w/ a 2000 watt motor. Thanks for you channel.
Good Job... Indeed with all of your DIY projects... You Must be one really wealthy guy with all those parts, tools and gadgets all ready-to-go, when needed... ;-)
Do you have a video of this one with all the measurements? By the way thanks for this one I learned a lot of this because of your video keep it up SR triple thumbs up for your efforts and hard work
🏍️👏😉 *Muchas gracias amigo* _es una moto eléctrica genial pero mi duda es, cuál es su tipo de cargador que debe usar y en cuanto tiempo hace la recarga de las baterías_ Saludos 🖐🙂 Sigue con más proyectos amigo que tal una mini-motoelectrica.
Now you have a business idea. Your idea is great for dad/mom and son/daughter projects, hobbyists, and people who are overall interested in diy in general. Idk if you need to hear this, but go for it and kick ass. You can even start small.
Hi friend, Part 2 I will upgrade lights, chargers and horn...Thank you !!!
How do you manage to get all those parts for all your projects??
Hello, can I contact you via WhatsApp, the owner of the channel?
reliable mechanical spirit
What do you think about making a computer box?
Add rear shock breaker too
this man lab is engeneriang lab
Nice job👏
Brother Mad Scientist , first. Love your play room. Beautiful flow to your work and the end result is like performing art . Thanks for sharing.
Whoever keeps what doesn't work, always has what he needs! But this guy is just for God! Always has everything you need! lol
😂😂😂😂
!
Mac Gyver WOULD CRY WATCHING THIS GUY.
HE GOT MORE THAN A VICTORINOX.
LOOKING AT ALL OF HIS PROJECTS, THIS GUY IS NO DOUBT A GENIUS. NOT ABOUT WHAT HE HAS MADE BUT HOW HE MADE THEM.
ONE OF WORLD'S BEST CHANNEL.
خهغعغغ الله ففع هاها هزلننفهخ
Nice bike mantap 👍👍👍
My question is: how much would it cost to buy all the parts and build it from scratch? Because this looks quite good and with some design improvements can actually be very marketable.
By the looks of his shop, this is his business
$400 for controller+batteries,Addition to that other minor expense for tyres, chasis, handle, shafts, absorbers, seat(depends on personal choise)
About 700$
@@shaileshkullal11 Hi Shail... Not sure if this was a typo but tysres is spelled with an i, so the correct spelling is tires. Also choise is spelled with a c, so the correct spelling is choice.
@@shaunhall960 thanks for correcting my grammer, usually I write with very good spells n grammer, but on utube just casual writing☺
Wow that's a really handy electric bike! And the good thing is, you make it as simple as possible 👍
❤️ Love from India 🇮🇳
I love the Captain America helmet.
No sound, no smoke!!! Greenpeace thanks for the project.
Channel creative: build electric bike at home
Me : this house is not a home ... its heaven🥺
yeah he acts as if everyone at 'home' have all these parts
@@ilex1197 and tools
no, his home is IKEA itself 😂
4m
You forgot about amazing maker
You sir are a boss... I am but an apprentice wanting your skills. I know its easy to follow but your boss skills are so creative you make it look so simple.
Thank you very much for sharing your super powers. :D
Great build and channel
Again you could make millions god has given you a gift thank you lord for this man in Jesus name amen
Helpful tip: fill the tubes with sand and close the ends before bending them. The sand makes sure you don’t collapse the tube like you did on this bike. When your done just empty out the sand
@@ItzRayen Yes, you are.
Wow, I've never thought of that
Great tip, thanks
Gh8
When you guys go to the bike foot-rest collection all of you have at home, just make sure you pick the two that match. Same goes for the brake handles, dont just pick any two from your spares in the garage somehwere, they should match.
Adipoli hero cycle karun
I hope I had shed like this... You have everything...
Much better to add a suspension on the rear wheel. Great work!
LOVE THIS GUY AND HIS LOVELY FAMILY! I HOPE HE IS GETTING PROPER ADVERTISEMENT MONIES FROM RUclips THOUGH! RUclips IS WRETCHED! I COULDNT EVEN KEEP COUNT OF HOW MANY ADVERTISEMENTS RUIN THE VIEW!
THANKS CC! WHAT YOU DO IS GREAT.
WHAT RUclips DOES?? RIDICULOUS!
I wasn't offended. All Caps are also enthusiasm. YOUR reply, Miss, I found offensive. I hear you and agree, Steve!!
very educational and entertaining to watch, thank you.
Very, very goooood!!!
WERNER
Good job, you are always creative, but in this work I forgot an important thing is to put the wheels cover, especially the rear wheel. It is unreasonable to find all the roads without water, and when you pass by, you will find your clothes from the back are worn out. You did not leave it, so I loved joking with you. Thank you Excellent work
.
Wow, putting metal frame on batteries with exposed connectors....
But great video and a nice build!
He lives dangerously
20$ says he's got rocket tech somewhere in the shop.
That bike looks like it is very comfortable to ride.
Love the over-all look, great project.
How i wish i could build an electric bike like that. Always wanting.
this is a result of YEARS of part and tool acquisition....i see thousands in tools alone,many thousands.the parts used would be close to a grand or more,then you need mechanical apptitude
Please listing your component part on description..!! 🙏
Your creativity is unparalleled. I admire your work.
The channel’s name is accurate right?
It was necessary to put a backrest on the seat, allowing the user not to fall off the seat. It was excellent. 👏🏻👏🏻
Love from Pakistan you are engineer ❤
Ficou top demais. Que pena que aqui no Brasil essas peças não tem com facilidade e quando tem é bem caras. Parabéns!!!
Получился весьма заебательский аппарат!
Mi mayor respeto y admiracion para tu trabajo. Saludos cordiales desde Mexico
Шикарный транспорт ,лайк однозначно :)
I love the vintage look, its really cool.
I was researching how to build an electric scooter for my channel and came across this. Its nice.
*Very good quality work you make Sir ! :) I can see this is not the first electric scooter you have assembled ;) I noticed you were pulling "stock," pre-manufactured electric scooter parts off of your shelves :) I think those parts are plentiful and cheap in your part of Asia.*
Cool bike and a beautiful country! 👍
Very Nice channel ,a genious man god bless u
Nice Bike 👍
Excellent build, I'm just starting the same build myself, great tutorial, thank you...
Hey I'm big fan of yours,keep building nice stuffs
I also big fan
I am inspired
me tooo
If I am late for work or if my car is out of fuel I can simply call this guy and instead of walking I will wait 29 minutes 😂 for a nice transport
Love from Zimbabwe 💚😣💙🙏
ناتنلغ
CH This is fire 🔥 from Philipines 🇵🇭❤️
LOV YUO
But where is the moter of bike
But the bike very nice and graceful
Really fantastic work, dude! Well done!!! 😃
Stay safe there with your family! 🖖😊
family ,sanak saudara dan kerabat jauh dekat .sedang hobi online dgn agen pulsa nonton siaran langsung live show youtube
Your garage is heaven!
I've found the best.... habitually watching true genius ... by the way love your shop, and its inventory.
All The Money He Recieve From RUclips Are The Reason He Have His Own Shop And Make More Creative Electric Bikes 😊
NO
Welding that close to batteries takes some serious bravery. 😳
Why?! This type of batteries are not flammable. 🤷♂️
He is a real man no like you lol
@@Coco-Moll lmao, ok.
@@marioramirez5478 Thank you for your contribution, Mario. Compelling and rich.
He is working unsafe and with no rules
This e bike needs to be launch in market
Your very good
Your pro in the world
This guy has everything he needs to build something for next 10 years I guess
Que show, ficou muito top
Дядя Ли задний элемент крепления колеса, - чисто китайский подход! Колесо отпадет! Нужно было или в угол трубы варить, или косынку делать больше.
Да это просто для видео вероятно так сделано. Этот агрегат скорей всего уже разобран и пошел на другие видосы
Best from Bangladesh
Im from u.s.a stay safe with vivid going around I love you by the way
Vivid what?
I loved this thank you for the content keep it up 👍
Your best💯👍
The right meaning of the professional mind
Desde España quiero felicitarte por todos los vídeos tan buenos que haces....es un placer ver como construyes desde cero cualquier vehículo sin planos y sin prácticamente ayuda en muchos de ellos. Un saludo
Estou precisando demais de uma bicicleta elétrica pra trabalhar mais não tenho condições
Sensacional o projeto. Parabéns. Queria ter uam dessas aqui no Brasil.
I want to your number my number is 8905262184
I love this bicycle
Türkiye den SA
This man is really creative...👏
He could explain some things ... Like, how the wires are connected, the pieces and the size of some pieces ... I love this channel
Impressive! But so, you can make some easy modifications. There are some space for luggage case in a back, over rear wheel, and so you can add front and back light for night driving. And then it would really became electric motorcycle
🇧🇷 curti muito esse projeto .
Колёса хорошие, вот задние колесо надо было на амортизаторе делать и сзади багажник придумать а так респект 👍
Thank you for removing the music from the testing stage your awesome
I need friends like your . Intelligence . Got bless you my friend
king of the road!
O MELHOR CANAL DO SEGUIMENTO NO RUclips!
Great build. I just found your stuff.
Where do you get all your supplies.
Nice workshop.
You should look a 4wd electric buggy.
A Brake Light and head lamp; The battery box could have used an external charging port; the battery box hinges anchors should have been screws or straps to restrict battery movement! you are a better craftsman than I,, Keep up the great videos!!
Waiting in excitement, to see part 2, just finished similar trike of same specification, fat tires like yours, w/ a 2000 watt motor. Thanks for you channel.
where did you get the tires?
Good Job... Indeed with all of your DIY projects...
You Must be one really wealthy guy with all those parts, tools and gadgets all ready-to-go, when needed... ;-)
ruclips.net/video/HoHw4YDCvpU/видео.html
Do you have a video of this one with all the measurements? By the way thanks for this one I learned a lot of this because of your video keep it up SR triple thumbs up for your efforts and hard work
Peace from Tunisia
parabéns gostei da mortinha só falta o lugar do garupa.
uma moto elétrica dessa da pra fazer umas entrega de comida aqui em Santo André SP 👍
Очень круто, тоже хотел бы такой!😅
Дааааа
🏍️👏😉
*Muchas gracias amigo*
_es una moto eléctrica genial pero mi duda es, cuál es su tipo de cargador que debe usar y en cuanto tiempo hace la recarga de las baterías_
Saludos 🖐🙂
Sigue con más proyectos amigo que tal una mini-motoelectrica.
¿ Y EL MOTOR ONDE LO PUSO ?
@@fcojaviercazaresgarcia3659 😎🏍️ el motor está en la rueda amigo
What a talent.. I wish I had your skill set
Damn this guy. I want one too!
wow amaziing... I love it!
Love the builds, thanks for sharing. Be safe friend.
Nice creation bro!! But it should have some mud flaps and back suspension. Back and front light is a must.
that was brilliant to watch, do you sell the things you make? thanks for the upload.
не предусмотрел.. вывод на зарядку ..а так всё не плохо для любителя))
Yeah, simple, ill just go out to my garage and pull everything off the shelf I need.
Lol
Sir muja bhe ya he apply karni ha
Bike 🚴
Очень понравился ваш мопед! Как говорится руки золотые !
Çamurluk da olusaymış iyiymiş!..
When you are start driving, a smile comming automatically
I wish there were shops doing these things
Now you have a business idea. Your idea is great for dad/mom and son/daughter projects, hobbyists, and people who are overall interested in diy in general. Idk if you need to hear this, but go for it and kick ass. You can even start small.
Di dukung dengan alat2 yang kumplit..bagus bnget
very nice
Dude the chisel method for bending is sweet
Just like others back wheel needs springs and lights. Otherwise it's awesome
This time also a unique idea from your excellent work.👍🤯🔥
#TechnicalBoyZameer
19:11 that futuristic sound sheesh
Welding with flip-flops....lol