So glad you showed a proper wiring job. Its insane how many incorrectly wired light setups out there. I just watch 5 or more videos that blew my mind how WRONG so many are!
Finally found a video that helped explain how to wire into a pulse bar. I did same thing except I ran ignition switch to toggle light. This is much cleaner and definitely how I will do my new RZR I'm wiring up now. Thank you
Can I use just the blue & black wires on a Polaris pulse bar plug?They come with a black, red & blue wire .Blue being the ignition. I have a LED dome light & it only has a red & black wire. It has a on/off push button switch on it so I don't want to have to use a rocker switch. If so? Would I put a in-line fuse on the ignition wire as well???
Do you have video to show how to add high beam switch to Ranger 570 Full size? They only come with single beam. I am changing out bulb to LED dual beam bulb. Also thank you guys for providing the "Key On Power plug" for the Pulse Bar (ordered yesterday). I have now added the Pulse Bar to my 570 Full size. I had to make my mounting plate but that worked out very nicely. Now I can add accessories to the 570 much mo easier!
Wired up my roof rack light bar and bumper light bar as u instructed, money, all is working and no fuse burnt, the wall i ran into is which wire on a pod light set should be snipped being harness is pre wired to feed two lights and no white wire is used on relay
Question, so if I use the pulse bar for any kind of lighting. The individual pulse bar plugs can't exceed 10 amps and total accessories per bar can't exceed 40 amps is that correct? I read were the pulse bar plug hot wire was was only rated for 10 amps. So would you even need a relay if you us light say rated to pull 5 amps and the rocker switch rated for 10 amps and using appropriate inline fuse.
So correct me if I’m wrong if I get one for my Atv and the harness has a pulse bar on it so it’s all ready done so all I have to do is cut the pulse bar and you have the three wires correct ground live and switched right
I’ve got a 2024 Polaris razor XP. I purchased a Chase bar and it has all these different colored wires for the reverse is white turn is blue. The other turn is brown. The red is stop. Where do I wire this up to? 14:19
So my light bar came with a 2 wire harness identical to the one here. My question is if i follow these instruction and convert it to a 3 wire harness. Can i still turn the light bar on with the key in the of position? Or do i have to cycle the key on?
Have you seen the Nilight wiring harness? If so can you help me wire up to my pulse bar with a 5 prong rocker switch so the key turn on the lower light in the switch. Thanks Don
How do I wire this switch to be key on power only so the led in the switch only lights up when my key is on. This rocker switch has a red and black and a separate red black and white coming out of the switch 2023 rzr turbo r trying to connect to the pulse bar witch is red black and yellow if you can help thanks
So glad you showed a proper wiring job. Its insane how many incorrectly wired light setups out there. I just watch 5 or more videos that blew my mind how WRONG so many are!
Finally found a video that helped explain how to wire into a pulse bar. I did same thing except I ran ignition switch to toggle light. This is much cleaner and definitely how I will do my new RZR I'm wiring up now. Thank you
Very Welcome
Good guide to rewiring a Kenimoto lighted rear-view mirror for my Ranger XP 1000. LED on rocker switch now goes out when ignition is off.
This video 💯. Helped me do exactly what I needed to do. My light bar and pod lights kept popping the acc fuse. Great video. Thankyou.
Can I use just the blue & black wires on a Polaris pulse bar plug?They come with a black, red & blue wire .Blue being the ignition. I have a LED dome light & it only has a red & black wire. It has a on/off push button switch on it so I don't want to have to use a rocker switch. If so? Would I put a in-line fuse on the ignition wire as well???
Do you have video to show how to add high beam switch to Ranger 570 Full size? They only come with single beam. I am changing out bulb to LED dual beam bulb. Also thank you guys for providing the "Key On Power plug" for the Pulse Bar (ordered yesterday). I have now added the Pulse Bar to my 570 Full size. I had to make my mounting plate but that worked out very nicely. Now I can add accessories to the 570 much mo easier!
Would I need to do 2 pulse bar plug if my light bar harness (baja style) has 2 relays for a 2 button controller. Thanks
Wired up my roof rack light bar and bumper light bar as u instructed, money, all is working and no fuse burnt, the wall i ran into is which wire on a pod light set should be snipped being harness is pre wired to feed two lights and no white wire is used on relay
Question, so if I use the pulse bar for any kind of lighting. The individual pulse bar plugs can't exceed 10 amps and total accessories per bar can't exceed 40 amps is that correct? I read were the pulse bar plug hot wire was was only rated for 10 amps. So would you even need a relay if you us light say rated to pull 5 amps and the rocker switch rated for 10 amps and using appropriate inline fuse.
@markrobey3066 the middle pin is keyed power 10amps across all 6 plugs. Bottom positive is 40amo across all plugs. Ground is ground
So correct me if I’m wrong if I get one for my Atv and the harness has a pulse bar on it so it’s all ready done so all I have to do is cut the pulse bar and you have the three wires correct ground live and switched right
What gauge or amp is the yellow wire ? I’m new to this wire stuff lol
What's the background music? It's great!
I’ve got a 2024 Polaris razor XP. I purchased a Chase bar and it has all these different colored wires for the reverse is white turn is blue. The other turn is brown. The red is stop. Where do I wire this up to? 14:19
So my light bar came with a 2 wire harness identical to the one here. My question is if i follow these instruction and convert it to a 3 wire harness. Can i still turn the light bar on with the key in the of position? Or do i have to cycle the key on?
Key has to be on.
did you do a video on converting the harness switch to a carling style switch I don't see it
Not yet. There is so many switches to change to Carling. I would have to make a bunch.
it also said there was a diagram on your site, i didn't see that either. @@automotivecustomlighting2555
Have you seen the Nilight wiring harness? If so can you help me wire up to my pulse bar with a 5 prong rocker switch so the key turn on the lower light in the switch. Thanks Don
Hello. This video I believe is a nilight harness. It should be the same. Message us up on our business Facebook page for step by step assistance
How do I wire this switch to be key on power only so the led in the switch only lights up when my key is on. This rocker switch has a red and black and a separate red black and white coming out of the switch 2023 rzr turbo r trying to connect to the pulse bar witch is red black and yellow if you can help thanks
Do you sell them all wired and ready for a Polaris
@@josephgrasshopper7437 Yes. automotivecustomlighting.com/store/polaris-heavy-duty-light-bar-wiring-harness-pulse-bar/
What if my harness has 3 leads with 2 relays?? Which relay do i come off with the white wire??
What if I have a 3 prong rocker?
Do you guys sell any light kits for the polaris?
Yes
What is your web page or how can we buy things?
How can I purchase 2 of those from you?
automotivecustomlighting.com/store/polaris-heavy-duty-light-bar-wiring-harness-pulse-bar/
Thank you!
You're Welcome