Good job on the video👌 My rotary lights did also turn on when they got power, i did cut the signal wire off and only used postive and negative, but then you can not shift between the different flashes, i did connect mine to a output on the beier module WITH A RESISTOR 😎 dont forget a resistor if you use that metod👍
Fine looking Truck Colin. I hope to be able to get at least one SFR-01.... JUST for the Throttle features alone!! My USM-RC-3 Units, as I've explained before, is exactly the SFR.... with your own ESC and $140 cheaper. Factor in the separate ESC, at only $30, with exceptional control, it's great value for money . But the Beier SFR-01 has a superior speed control . I'm intrigued to try one, all based on your demonstration and recommendation! 😉 My Hobbywing WP-1080 ESCs are fantastic. World Class slow speed control, 80 Amp capacity. Comes with Programming Card, that can set Lipo Voltage, low and high speed Expo and limits, 15 settings for various Brake profiles, Throttle sensitivity, special PWM Setups to make low Turn 3-Slot Motors be able to CRAWL at 0.015 mph!! Plus several other features that we'll never use. But NO Cruise Control, no separate Direction Control, no freewheel option. And I'm sure you showed me several other COOL features! Plus packaging is better for tiny Merc Cabs!! 😝 Someday. We're currently in Dire situation, actually living in our CAR for a few months, because of our crooked Slumlords, and a saturated Housing Market here.... 😵😭 At least we have access to WiFi, so we can stay in touch and stay entertained. I've Screenshot half of this Video!! Again, very valuable instruction! 👍👍🍻
Hi Carmine. Thanks for your kind comments once again. I was hoping this - of all of the build videos so far - would be most interesting and informative. And it appears so. Very sorry to hear about your housing predicament. I do hope you can resolve the situation as soon as possible. Regards
Another good video very informative and interesting.👍
Thank you for your support sir
I 'm Really Sold on the Red Colin. This was a very enjoyable video showing the controls and setup.
Thanks Mark. I guess some parts are more interesting than others lol
Good job on the video👌
My rotary lights did also turn on when they got power, i did cut the signal wire off and only used postive and negative, but then you can not shift between the different flashes, i did connect mine to a output on the beier module WITH A RESISTOR 😎 dont forget a resistor if you use that metod👍
Many thanks for this Herfinn. I'll have a look at cutting the signal wire. I only want a standard rotation anyway.
Fine looking Truck Colin.
I hope to be able to get at least one SFR-01.... JUST for the Throttle features alone!!
My USM-RC-3 Units, as I've explained before, is exactly the SFR.... with your own ESC and $140 cheaper. Factor in the separate ESC, at only $30, with exceptional control, it's great value for money .
But the Beier SFR-01 has a superior speed control . I'm intrigued to try one, all based on your demonstration and recommendation! 😉
My Hobbywing WP-1080 ESCs are fantastic. World Class slow speed control, 80 Amp capacity. Comes with Programming Card, that can set Lipo Voltage, low and high speed Expo and limits, 15 settings for various Brake profiles, Throttle sensitivity, special PWM Setups to make low Turn 3-Slot Motors be able to CRAWL at 0.015 mph!!
Plus several other features that we'll never use.
But NO Cruise Control, no separate Direction Control, no freewheel option. And I'm sure you showed me several other COOL features!
Plus packaging is better for tiny Merc Cabs!! 😝 Someday. We're currently in Dire situation, actually living in our CAR for a few months, because of our crooked Slumlords, and a saturated Housing Market here.... 😵😭
At least we have access to WiFi, so we can stay in touch and stay entertained.
I've Screenshot half of this Video!! Again, very valuable instruction! 👍👍🍻
Hi Carmine. Thanks for your kind comments once again. I was hoping this - of all of the build videos so far - would be most interesting and informative. And it appears so.
Very sorry to hear about your housing predicament. I do hope you can resolve the situation as soon as possible. Regards
i put my beacons on a 2 way switch. .
Hi. Yes, there's several ways to connect them.