How to Replace Top End and Clutch in a Beta 2 Stroke (2022 Beta 300 RX)
HTML-код
- Опубликовано: 16 июл 2024
- This video shows how to replace the top end and clutch pack in a 2022 Beta 300 RX. This bike had 240 hours on it at the time of the rebuild and was its first top end! This video should apply to a wide variety of Beta 2 strokes, including the 250 and 300 RR. The clutch style changed from traditional spring to Belleville washer in 2022.
Enter to win the CR250: kincadepavich.com/win/2023-ho...
Follow me on other social media:
Instagram: / kincadepavich
TikTok: / kincadepavich
Want to support the channel? Bookmark this affiliate link to make your purchases on MotoSport:
Purchase cleaning wheels and rebuild kits from Pryme MX: www.prymemx.com/?ref=kincade
Contents:
0:00 Teardown
1:35 Anti Tamper Bolts
2:50 Powervalve Arm
3:35 Piston Removal
4:21 Base Gasket
5:00 Cylinder Installation
6:20 Clutch Pack Replacement
7:49 Buttoning Everything Up Авто/Мото
Don't have a Beta but had to watch because I love Kincades editing tbh
My guy!!
I love the way you explain and edit. Very helpful. Look forward to seeing more how to videos!
Great video! Never had an opportunity to wrench on a beta before so this video was very interesting. I hope to get one in my shop soon!
I love the how to video style, thanks!!!
Thanks for posting.
I have never ridden any of the RR models but I rode a beta 300 Xtrainer and a beta 390rr-s. Really nice bikes for sure.
finally a new video :) I love the style of your videos ! greetings from germany °!
Thank you!!
That CR looks sharp!! 😮💨🤤
Awesome video I love it !!! Hopefully I will be getting my RX300 BETA on Saturday ! Being a long time KTM rider ( I have 4 of them ) I'm pretty excited about it . Hopefully I won't be saying " Beta get a KTM ) LOL Awesome information that will be rewatched ) glad your back on videos- happy Thanksgiving 😀
Thanks Mike, hope you had a nice Thanksgiving!
I’ve been lucky enough to have a lot of bikes in my time. Got a 22 Beta 200 and some maintenance can be annoying due to bolt placements but it’s been my favorite bike ever to ride by far.
I bet that 200 is sick!
Those security bolts are absolute BS and shame on Beta for using them, those things are a complete PITA. I always scrub the engine with a long scrub brush with soap after I remove the tank, so the frame and the entire area is super clean before I open her up. I noticed you didn't check the deck hight? ... Nice vid.
You are correct that I didn't check squish. I didn't have the tool Beta suggests. I visually inspect the piston at TDC for clearance, and then match the base gasket. Never had any issues doing it this way, but maybe that'll bit me one day.
@@KincadePavich No, I would say with your amazing abilities and eye for how things work and go together, you are just fine! You have some of the best work I've seen in years. Thanks for the vid and for writing me back, and I look forward to seeing more of your great work.
Cool video! CJ - cool kid that 😎
Nice
To be honest I would put some 2 stroke oil on the piston before installation, but overall great video.
I did!
I take it the clutch cover bolts are all the same? Good video!
Hey I have a 2022 300rx and about to do my first top end. Did you order a specific kit online or did you order parts separately?
Great video,can you tell in advance if it is a piston or b?I have been told that is e
Whritin on the cylinder head but I didnt find it
Yes it was an A piston and A cylinder. It was stamped on the cylinder; I believe inside of the left powervalve cover if I remember correctly.
What’s going to be your next build bike or next flip bike
Got a few in the works - Levi's RM125 video should be next. Doing a build on my KTM 200. Refresh on my KTM 350. KLX 100 pit bike. Hopefully a 600cc snow bike. Lots in the works!
whT tool do I need for my top end
the anti tap Tool I can't figure it out
Your the gaottttttt!!!!!!!!!!
*you’re
How many hours did the bike have on it? My bad if i missed you saying it in the video.
It had 240 hours on it and that was the first top end!
@@KincadePavich That’s incredible! I would highlight that in the description so beta owners know when thinking about doing a top end! I have a 2019 Beta 300RR with 25hr I was thinking I would need to do it at 80-100hrs. Haha
It is incredible - I actually didn't know. I had to text CJ after you left this comment. I probably wouldn't recommend pushing it to 240 hours, but this one managed to survive that long! Added to the description.@@gripsanity
@@KincadePavich Gotcha, yeah probably a little long but I’ve also had an old time dude who was a beta dealer tell me 200 hrs. Most just tell you to do it around 80-100 as the standard answer unless the bike is seeing high level competition.
The impressive part is CJ is a high level A rider who does not go easy on the bike. So I'm not sure if every bike would last 240, but CJ is certainly putting it to the test. So yeah, you may be safe to go 200. I always consider it cheap insurance though; top ends are easy. Personally, I probably wouldn't go past 150 if it were mine.@@gripsanity
The discount code doesn’t work for me.
Should be fixed now. I set the expiration incorrectly.
You should always grease your gaskets guy
👍
Didn’t know these had anti tamper bolts on them. Seems pretty stupid to me honestly. Not sure if that’s an industry standard thing now or what but for people that do their own wrenching it’s a minor annoyance. That bike is sick though