SONY PS LX520 LINEAR TRACKING TURNTABLE TONE ARM BELT REPLACEMENT AND REFURB

Поделиться
HTML-код
  • Опубликовано: 7 янв 2025

Комментарии • 11

  • @euclidesortiz7766
    @euclidesortiz7766 Год назад +1

    I have some problem. But change of ban and works. But to works electry chokcs. And now not what happen???

  • @78vinyl97
    @78vinyl97 2 года назад

    Nice turntable.i have the same model.the only problem i have with mine is that the arm sometimes doesn't automatically drop onto the record and I have to use the cue button instead.

    • @AudioTomReviews
      @AudioTomReviews  2 года назад

      Ouch, that one will be tough to trace. It could be capacitors failing due to age, or it could be a lubrication issue. The tone arm uses silicone damping fluid, but if it leaks out it usually causes it to drop too hard. These are just wild guesses.

    • @78vinyl97
      @78vinyl97 2 года назад

      @@AudioTomReviews I reckon it could be the fluid issue.when it reaches the correct position to drop it makes a clicking noise and sometimes will drop too fast which causes it to bounce and other times it will click and just hover until I press the cue button.i will also check the capacitors.

    • @AudioTomReviews
      @AudioTomReviews  2 года назад +1

      300,000 wt silicone oil from a hobby shop (I think for RC cars) is the damping fluid, or this: www.turntableneedles.com/Cue-Damping-Fluid
      Likely the same thing.

    • @78vinyl97
      @78vinyl97 2 года назад

      @@AudioTomReviews thanks for that.i will have to purchase some.

    • @78vinyl97
      @78vinyl97 2 года назад

      @@AudioTomReviews where do I apply the fluid?.i'm guessing I have to take the part off where it says t4p? If so how does it come apart?