Yes, from 0.06-0.19 we can se only two ADJ Focus Spot 2x (red light directed to the ceiling) and one ADJ Mega Hex Par (blue light in the back of table).
Hey there, this set up looks great! How turned up do you have the microphone on our gigbar? Sound active mode for me seems to be a lot more crazy and random compared to this video. I especially liked the part where the lights were completely turned off just before the music dropped. My lights never seem to have a moment turned off when in sound active mode. Thanks in advance for any tips!
I have a gig bar move that I use for mobile gigs but can’t seem to find a good setting “light show”. If anyone on here has a suggestion please let me know. Thank you all.
For this setup you need a pair of Chauvet GigBar2, but I think you can make something similar with two GB Moves as well. First of all you have to daisy chain them - use a 3-pin DMX cable. (If you want to connect 3 or more products, make the master unit the first unit in the chain. Configure all the slave units before connecting the master unit to the chain.)
Slave unit 1. Press repeatedly until SLAV shows on display 2. Press to accept Master unit 1. Press repeatedly until SN01 shows on display (You can choose from two different mixed effects in Sound-Active mode by pressing or while SN01 / SN02 shows on display.) 2. Press to accept
Thank you for your comment Stuart. I think it depends on the country, where you live, the regulations you have there and the gigs you do. Otherwise I don't usually use that much fog. I partially agree with you, most of the lights are of course less effective without fog.
Hey! For this setup you need a pair of Chauvet GigBar2. First of all you have to daisy chain them - use a 3-pin DMX cable. (If you want to connect 3 or more products, make the master unit the first unit in the chain. Configure all the slave units before connecting the master unit to the chain.) Slave unit 1. Press repeatedly until SLAV shows on display 2. Press to accept Master unit 1. Press repeatedly until SN01 shows on display (You can choose from two different mixed effects in Sound-Active mode by pressing or while SN01 / SN02 shows on display.) 2. Press to accept
It’s simple but impressive. Moreover there is a pair of ADJ Focus Spot 2x (with the red light in the background) and an ADJ Mega HEX PAR (blue light) attached to the bottom of the table.
I didn't expect it to be that cool. I'm impressed.
Excellent set up
Thank You DJ Drew.
This is insane.
Definitely working on getting some of these soon
But its not only the gigbar theres also lights added up top for a more insane effect
Yes, from 0.06-0.19 we can se only two ADJ Focus Spot 2x (red light directed to the ceiling) and one ADJ Mega Hex Par (blue light in the back of table).
Aight….guess i‘ll get myself a xmas treat then tho 😅
Can you do a longer vid including the Dj’s POV with fog? We’d like to see how the light projects out to the crowd.
I will DjCaribè, after the Covid. Unfortunately I have no gigs in the near future. Until then check out my other videos on my channel.
This is a lot of fog lol
Hey there, this set up looks great! How turned up do you have the microphone on our gigbar? Sound active mode for me seems to be a lot more crazy and random compared to this video. I especially liked the part where the lights were completely turned off just before the music dropped. My lights never seem to have a moment turned off when in sound active mode. Thanks in advance for any tips!
Turn your gig bar all the way down, then turn the knob slowly till its first responds. During breakdowns it will black out for you
@@chadlincoln3821 Thanks! That's super helpful
@@jaymayor1did it work?
This looks very good.
I have just got one.
So this is purely on the inbuilt sound censors?
Thanks JayT.
Exactly, no DMX.
@@gaborszaller1991 thanks. I will be testing it this weekend. 👍
Thanks for asking my question! Exactly what I was looking for😀
@JayT have you used just one for weddings? How do you like the Gigbar2?
@@griseldachavarria7406 Yes it’s great. I only have one and have used it a few times now. A great bit of kit !
I have a gig bar move that I use for mobile gigs but can’t seem to find a good setting “light show”. If anyone on here has a suggestion please let me know. Thank you all.
Use sound mode and adjust the intensity knob fairly low enough so it can react to the music … also use the controller to choose a specific color
How can you do this???
I have 2 gig bar moves, but always just set up with the music.
For this setup you need a pair of Chauvet GigBar2, but I think you can make something similar with two GB Moves as well.
First of all you have to daisy chain them - use a 3-pin DMX cable. (If you want to connect 3 or more products, make the master unit the first unit in the chain. Configure all the slave units before connecting the master unit to the chain.)
Slave unit
1. Press repeatedly until SLAV shows on display
2. Press to accept
Master unit
1. Press repeatedly until SN01 shows on display (You can choose from two different mixed effects in Sound-Active mode by pressing or while SN01 / SN02 shows on display.)
2. Press to accept
the majority of venues you can't use haze or fog. so the majority of lights are crap without it.
Thank you for your comment Stuart. I think it depends on the country, where you live, the regulations you have there and the gigs you do.
Otherwise I don't usually use that much fog. I partially agree with you, most of the lights are of course less effective without fog.
@@djszaller whenever I go to the DJ shop, the first thing he does is reach for the fog before I can say 'NO'. wash lights are the way to go I think?
Two. Of this or one gig bar move?
2 of these are a show
I have this and the sound sync kinda sucks. I had to go back to using sound switch.
How do I set up my lights to this setting bro?
Hey! For this setup you need a pair of Chauvet GigBar2.
First of all you have to daisy chain them - use a 3-pin DMX cable. (If you want to connect 3 or more products, make the master unit the first unit in the chain. Configure all the slave units before connecting the master unit to the chain.)
Slave unit
1. Press repeatedly until SLAV shows on display
2. Press to accept
Master unit
1. Press repeatedly until SN01 shows on display (You can choose from two different mixed effects in Sound-Active mode by pressing or while SN01 / SN02 shows on display.)
2. Press to accept
It’s simple but impressive.
Moreover there is a pair of ADJ Focus Spot 2x (with the red light in
the background) and an ADJ Mega HEX PAR (blue light)
attached to the bottom of the table.
Is this is dmx or sound active
Its sound-active.
Song name please
Will Sparks - Disco Dancing
What is the model name ?
Chauvet GigBar 2
AaaaaVVVVVV