ok rin kaso pinatong lng ndi molded. kaya nga ng carbon fiber para magaan at matibay. beats the purpose kaya ka nga carbon fiber, sana ng vinyl wrap nlng
pinaka ma bisa jan wag mo natopcoatan kasi lilihain mo din rekta mo detailing tapos ceramic mo😊 sa pag papa tuyo para maka less ng oras gamit ka curing lamp🎉
Sir, pano kaya yung diskarte para sa edges? Dun kase ako nagkakaproblema, nahihirapan ako itrace yung pinakaright edge pagkatapos ng first 3 coat after ilapag yung carbon cloth.
Great job! I'm starting a business where parts (about have smaller than what's on the video with gentle curves) need carbon fiber skins. Let me know kababayan.
He did a great job. Skinning is not useless. I made a switch panel for my jeep out of thin plastic sheet and carbon fiber skin. It's amazingly strong. On parts of it I used the carbon fiber to cover up holes. Then went back and sanded and re epoxy to make it smooth. I love this stuff. Haven't tried "forging yet"
@@zxtuner4lyfe i didn't say anything about job just skinning for adding extra material is useless what can be happen to the shifter cover this usage i think out of purpose
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
Boss magkano pag nagpagawa Po senyo ng carbon fiber Po mga fairings rusi Venus 125 Po kung nagllagay Po kayo fiber carbon??
Thinking about this on a broken side fairing but maybe peel ply and vacuum bag instead of layers and sanding. Looks looks good
thank u boss.. detalyado talaga ang vid..
napaka ganda nang result...
Make it look easy! Find your videos very helpful as a beginner, thanks for sharing and keep up the good work 👍
Where I buy this black fiber paper and this glue...🤔
ok rin kaso pinatong lng ndi molded. kaya nga ng carbon fiber para magaan at matibay. beats the purpose kaya ka nga carbon fiber, sana ng vinyl wrap nlng
Kaya nga po carbon skinning yung title
Kaya nga carbon skinning..naligaw ka ata
Pa discript naman dol kung anung brand ng materials ang ginamit nyu.
Galing mo boss ahh ganda.😁
Grabe hindi ka po madamot lods sa pag share ng knowledge mo Godbless you♥️
That looks great - Salamat sa pagbabahagi!
pinaka ma bisa jan wag mo natopcoatan kasi lilihain mo din rekta mo detailing tapos ceramic mo😊 sa pag papa tuyo para maka less ng oras gamit ka curing lamp🎉
Sir, pano kaya yung diskarte para sa edges? Dun kase ako nagkakaproblema, nahihirapan ako itrace yung pinakaright edge pagkatapos ng first 3 coat after ilapag yung carbon cloth.
ang pogi sir. ang linis pagkagawa
anong bala nung grinder?
Anong gamit mong pang buffing boss?
can i use epoxy resin instead of gel coat
Anong rubbing compound po kaya gamit ninyo?
San ka umorder ng carbon skin boss
nag gaganyan kayo ng helmet? magkano?
Boss anong manga tawag sa manga kaylangan gmit jn
Boss ano name po Ng pang rubbing mo
BOSS ANONG RESIN GAMIT NYO? SANA MASAGOT BOSS HEHE NEW SUBSCRIBER HERE
Epoxy resin po. Kahit Anong brand
is that 100 cc means 100 grit?
boss yung pinangcocoat mo resin din?
Clear coat po
Great job! I'm starting a business where parts (about have smaller than what's on the video with gentle curves) need carbon fiber skins. Let me know kababayan.
magkano po kaya pa-repaint ng rusi gamma200? saan po location nyo?
Boss magkano Po mag pa carbon Ng tangke Ng barako 175
Lod anung carbon cloth gamit nyu? Parang wet na sya bago nyu inilagay.
No, it's a 2x2 twill weave sheet of dry carbon fiber.
what are the materials used can you sort
Boss saan po location nyo?
BOSS, TANONG KO LANG PO PAANO PO YUNG SA MGA BUTAS NG BOLTS? ANO PO GAGAWIN DOON PARA MA BUTASAN, SANA PO MASAGOT. MARAMING SALAMAT PO
Barena lang boss hehe
PaanO Mo Babarenahin Boss ? Sa iLalim Ba O Sa iBabaw ?@@abstrakk1021
@@abstrakk10211yr Na Pala To Hindi Ko Alam Kung Mababasa Mo Pa Comment Ko Boss 😅
magkaano boss kapag gas tank ng xr200?
Boss ano po tips niyo para maging reusable ung brush pang lagay ng epoxy? Salamat po
Babad mo lang sa urethane thinner
Rubbing compound lang po ba yung gamit boss wala ng step 2
1 step lang, optional lang nman kung gusto mo mag polishing compound
May I ask what was used at the end?
@@lanA-kr9lm rubbing compound
@@JSpecworkz What brand is it, please, 3M?
Nagka bubbles padin kahit ginamitan muna ng torch
Looks great
Buen trabajo 👍🏻✨
What's the first glue you put on it please
@@shandrarathke7787 epoxy resin. Then wait 1.5 hours before you lay the carbon fiber
ganda ng finish product
amazing work
Can you do my ktm 690 plastics po?
Pwedi ba yan kahit d gamitan ng clear coat buffing lang?
Pwede naman. Kaso masmabilis sya magyeyellow kapag lagi naaarawan
pwede po ba heatgun gamitin pag wala blowtorch?
Pwede naman bsta low fan lang sya
Any student here 😉😄😄
ilang coat ba ng resin ginawa mo jan boss
ano ginamit mo na rubbing compound?
Nsa 7 coats yata. Timeless yung gamit ko para kung gusto mo mas magnda, 3M na brand
Ito yung legit❤❤
lupet idol❤
Sir pwedi ko bang gamitin ung pang acrylic flattening paste sa k92 2k clear coat?
Pwede po. Yan dn gamit ko kapag matte finish
@@JSpecworkz thank you po sir. May fb account pu ba kayo baka pwedi ko kayo ma add.
Boss,anong rubbing compound ang gamit mo?at ilang araw ang patuyo bago ka nag polish?salamat serr..
Timeless po. 1 week after painting ang recommended. Yung sa video 1 day lang after matuyo ng clear kasi nagmamadali ako
@@JSpecworkz magkno po magpgawa ng carbon?
idol san po makakabili ng set na mga gagamitin pang carbon?
Sa shopee po
Nice!
san location mo bro?
Sir pano po kaya dpat gawin para mwala yung maliliit na bubbles ...
Iblow torch mo paps
Thank u po...
Boss kung nkaprimer na at icacarbon ko need p b tanggalin ang primer?
Dapat walang paint. Bare plastic dapat sya
anong gamit mo na resin sir?
Epoxy resin boss
Hm singil mo jan boss
boss ano ratio mo ng resin?
@@ivansantarina8622 depende po sa resin na gagamitin nyo. May iba ibang ratio sila
Hm singil mo boss
Gmagawa ka pala tlga boss kala ko gaya2 ka lng sa iba
nice bro!
Wet sand last and then buff it
@@jackscott5144 yup, that's right
gabda lods malinis
Linis mo gumawa boss!
Ano mga ratio nyan boss 1st timer lang rin
Dpende sa binili mo resin. My instructions yun. Saken 60/40 ginami ko
👍👍❤❤
Boss baka pwede mo din masample yong gas lid ko hehehehe salamat po.
San loc mo boss baka pwede makapagawa sayo.
@@markangelobrioso7789 Pampanga po ako
@@JSpecworkz sir saan ka sa pampanga, mag pa customized ako ng motor ko, mecauayan bulacan ako sir.
@@toots3020ph sa porac pa po boss. As of the moment, side line ko lang yan. May work na kase ako
@JSpec Workz ah okey po sir, nakakahanga sir ang mga gawa nyo, pati tools na gamit nyo.
Napakalupet.. pinag-igihan.
skinning is useless
He did a great job. Skinning is not useless. I made a switch panel for my jeep out of thin plastic sheet and carbon fiber skin. It's amazingly strong. On parts of it I used the carbon fiber to cover up holes. Then went back and sanded and re epoxy to make it smooth. I love this stuff. Haven't tried "forging yet"
@@zxtuner4lyfe i didn't say anything about job just skinning for adding extra material is useless what can be happen to the shifter cover this usage i think out of purpose
It's for the looks...
@@kuraigasonewala tau magagawa kung hndi mo nappreciate, maganda yan madalas pag may mga basag na panels
@@zxtuner4lyfeforged carbon is good but very hard to work on. Because they are hard to level each fiber. .