Vw Polo 2007 with Waiting time 💥Lost manual + spare manual key. Read pin and programming the keys

#antitheft #automobile #keyprogramming
Volkswagen Polo 2007 lost all keys situation using Autel im508.
I tend to find a few of those 1.2Htp with Waiting time for programming the keys. I usually wait mote than 10 minutes with ignition on and then I repeat the process.
Error message in the dashboard I clear it out by disconnecting the battery terminal. or battery reset.
This video is for informational purposes only! We do not assume any responsibility for material damage or damage to personal property as a result of the information contained in this clip. Use this information at your own risk. More VIDEO TUTORIALS
ALL BRAND NAMES, TRADEMARKS AND REGISTERED TRADEMARKS APPEARING ON THIS CHANNEL ARE THE PROPERTY OF THEIR LEGAL OWNERS AND ARE USED FOR DESCRIPTION / ILLUSTRATION / IDENTIFICATION ONLY

[@mehdiel1710]

I had the same problem, the story ended in immo off 😂. Did you prepare your ID48 in TP23 or TP23 + dealer key?

[@sebastianthelocksmithandre1600]

Id48 and wait 15min ignition on

[@FRANCO-zo8gi]

Same problem, and ignition on 15 mins not work.😂

[@m.claudiu.m632]

👌👌👌

[@jackford4316]

Did you just keep trying till it went through?

[@Luca2105]

Am facut acum doua zile cu xtool pad2. a mers fara probleme. mai mult mi-a luat sa tai lama decat sa scriu cheie

[@lanaturelaplage228]

Hallo Sébastian i want ask you which key programmer es good iM508 oder obdstar x300 dp plus?

[@sebastianthelocksmithandre1600]

Both are good. Depends what you want to use it for. Autel can do mercedes so that's a plus...

[@lanaturelaplage228]

Oke thank you fur information

[@bobbaxter952]

Did you just clone original key?

[@sebastianthelocksmithandre1600]

No. I have programmed a spare

[@autodiagnosticmaze9112]

zero should have been placed in front of all numbers

[@niczam461]

Te-a prins mosu la final ca iti stergi urmele :)

[@sebastianthelocksmithandre1600]

Cine e atent....

[@motosystemltd]

Great video, Vw passat I believe 2009 half smart, add key did waiting times for few times, I end up cloning Id 48 with serwer calculating went quicker😂... shortcut. But there was remaining time on scanner screen, get into loop

[@Antonio-nz3tn]

Life

[@marinmorava691]

My IM508 does not work for this function well automatically, in my case it is necessary to use the diagnostic functions and instead of the VW Polo select the Škoda Fabia 2007- and use the coded channel to start the key acquisition function/ connect to the immobilizer with module 25/ use the pin we previously received via Half for security login needs/ go back a step and select customizations/ select the offered key learning menu/ enter 1 and test the entry and after that it appears that it is possible to save the value and after that it will allow you to learn the key with all those further steps by giving the contact to you the immobilizer light goes out with a new key and the key works. this video below may help ruclips.net/video/WRIC2oMfITI/видео.html