Allen & Heath CQ-18T - Learning From The Complete Channels
HTML-код
- Опубликовано: 8 июл 2024
- this video talks about using the easy EQ and vocal quick channels and then converting them to the complete channels to see what processing has been applied from the factory.
#acoustic #band #countrymusic #duo #livemusic #solo #classicrock 
Видеоклипы
Just Purchased the CQ-12 for my mobile DJing. This video is just what I needed. Def appreciate you for making this 💪🏾
Can you tell me. with vocals. What FX should I use to get the best out of my voice? reveb and delay. you feel good.
Which mixer are you using? For years and years I just used one of the reverbs provided in the Yamaha mg10xu but now with the CQ18t, I use the echoverb. The echoverb combines reverb and delay and allows you to control multiple parameters.
@@JHGurganus i have Allen heath cq18t
@@JHGurganus Do you only use 1 FX? Can you just let me know. you send reveb and stereo delay. how much %. -5 or …-1…+1.. I have Allen heath cq18t
@@bin5199 here you go:
Vocals: echoverb with echo time on mid - level straight up. Reverb size just a little less than half and colour straight up. Delay on 190 ms level about a quarter the way up.
Vocal sends at -17dB
Acoustic guitar: spaceverb - space set on small hall. FX assist set to deep. Decay time between a quarter and halfway up.
Guitar sends at -26dB
I sometimes tweak things between shows but I've used these settings the last couple of gigs. Hope this helps!
@@JHGurganus Thank you very much. I just sing. don't use guitar
I am planning to install this in a house of worship where it may be turned on from outside and no user. Will it work without any human intervention after being set up?
If I understand the question correctly, you would have to leave all channels unmuted but I'm not sure that's the best way to do things. I really didn't have any experience with installs, though.
@@JHGurganus yes, want to set volume and leave it unmuted. Its not always possible for an operator to be present and I am worried if this mixer needs to press atleast 1 button before outputting sound. We have an on power switch outside the room for this purpose
@@AhmedAli-mw8pb I understand. I know when it powers up it doesn't go right to the mixer screen...at least mine doesn't. But, I would think if there is a specific channel that is unmuted with a sound source going to it that it would start outputting sound but I could be wrong. If you don't need all this mixers capability I would think there may be better choices like a more basic analog board, but if you do need this mixer I would think it could be set up to do what you need.
Is your specific question in reference to playing back some background music or for a vocal microphone for someone who is going to speak?
@@JHGurganus you are right, analog seems the right way to go, and we do have a behringer analog already installed but was looking to upgrade to get better sound and features for occasions. Thanks alot for your response, really appreciate it