Precision Positioning in Lightburn - No Camera, No problem!

Поделиться
HTML-код
  • Опубликовано: 29 сен 2024
  • ➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
    The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
    ➡️ rolyautomation...
    The LaserMATIC 10, 20 & 30W are now IN STOCK!
    The Roly Automation Facebook Group:
    / rolyofficial
    =======================================
    Follow me on Instagram for behind-the-scenes pics and videos!
    / louisianahobbyguy
    Shop my Amazon Store for focused laser products!
    www.amazon.com...
    Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
    The Laser I use most frequently, The Roly LaserMATIC 10: King of the Diode Lasers!
    ➡️ amzn.to/3oIzOzp
    AVAILABLE NOW ON AMAZON!
    =======================================
    🏆Become a Patreon Supporter for insider benefits and downloads!🏆
    Patreon supporters get 80-100% OFF in my graphics store!
    engraveandcutf...
    / lahobbyguy
    =======================================
    ➡️ My hobby Forums: lahobbyguy.com/bb
    Facebook: / lahobbyguy
    Facebook Group: / lightburnsoftware
    Need to message me? m.me/105768145...
    Check me out on Rumble! rumble.com/c/c...
    =======================================
    👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
    If you're looking for a Co2 laser, use my exclusive discount code!
    This code is good on all laser website purchases at www.gweikeclou...
    ➡️ Coupon Code: LAHOBBYGUY
    (Coupon code not valid on pre-orders of new products)
    ➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
    lahobbyguy.com...
    ➡️ 4 Physical bed Material Standoffs - $17.99
    (ALWAYS LIMITED STOCK)
    lahobbyguy.com...
    ➡️ 3D Print Honeycomb bed air gap Standoff STL File
    lahobbyguy.com...
    ➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
    (Other Sizes Available)
    amzn.to/3KCDWIU
    =======================================
    THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
    👉 This is a special VIEWER ONLY package deal!
    🔗 lahobbyguy.com...
    Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
    Take an ADDITIONAL 7% OFF with
    Coupon Code: ➡️ HobbyGuy
    =======================================
    I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
    If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
    🔗 PayPal link: paypal.me/laho...
    =======================================
    Need to mail me something?
    The Louisiana Hobby Guy
    4945 Grand Terre Drive
    Marrero, LA 70072-6613
    Lightburn Software - Try Before You Buy!
    🔗 lahobbyguy.com...
    Lightburn printable shortcuts guide:
    🔗 lahobbyguy.com...
    =======================================
    Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
    =======================================
    ➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
    amzn.to/3OCSdGE
    ➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
    www.walnutroad...
    info@walnutroadwood.com
    ➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
    ➡️ Ocooch Hardwoods:
    ocoochhardwood...
    🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
    s.zbanx.com/r/...
    Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
    amzn.to/3fg0qPX
    The CORRECT glasses for my diode laser!
    amzn.to/33QQHNU
    CHEAP and effective transfer/mask tape
    amzn.to/3HVzGR6
    Stainless scissor platform for height adjustment of my bed
    Several sizes to choose from
    amzn.to/2QVUSSa
    Steel bed for my other laser:
    amzn.to/3BVoBgb
    "Punk Spikes" for the steel bed:
    amzn.to/3mAMBjV
    LED light bases - 2-pack - CHEAP and nice!
    amzn.to/3yEdPK5
    Pre-cut Acrylic for LED light bases
    amzn.to/3HTJHhx
    10-pack of Acrylic, 5x7 clear
    Several sizes to choose from
    amzn.to/3JXqmhk
    60 Pack of thin wood rounds
    amzn.to/3oTRwvA
    Slate coasters with a stand
    amzn.to/3qfIiMk
    #LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero

Комментарии • 189

  • @TheLouisianaHobbyGuy
    @TheLouisianaHobbyGuy  2 года назад +18

    If you're having trouble aligning the burn on your projects, *THIS is the video you've been waiting for!*

  • @KeithBurtis
    @KeithBurtis 2 года назад +1

    I'm a relative newbie to lasers. I've had the Atomstack 5W for about a year. These are great tips. Thank you for sharing.

  • @PhilippinesDarrellCheeks
    @PhilippinesDarrellCheeks 2 года назад +2

    Another good one Rich !

  • @JohnHoskins42
    @JohnHoskins42 2 года назад +2

    Definitely gonna use this method. But in your fist demo with the coaster, How did you have focus set for both cardboard and a fairly thick coaster?

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад +1

      I focused between them, first on the cardboard, and then on the coaster John. Just cut that part out of the video.

  • @jwmadzelan101
    @jwmadzelan101 2 года назад +1

    thanks for all the help you have been giving me on your videos. Can you tell me what start from position you were in for this project

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      None Jon. This can only be done in absolute coordinates.

    • @jwmadzelan101
      @jwmadzelan101 2 года назад +1

      @@TheLouisianaHobbyGuy thanks. did a 4 inch class mirror this morning and it all worked great

  • @warrenking1815
    @warrenking1815 2 года назад +1

    Neat idea, I like it.

  • @garrettriis7266
    @garrettriis7266 2 года назад +1

    Total newbie here and I can’t thank you enough for all your instructional videos (to include this one). You gave me the confidence to finally buy a laser.
    One question about this technique. Instead of engraving the cardboard to help with alignment, could I cut the cardboard out to make more of a jig to drop the workpiece into? Is there a down side to this? Thanks again!

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      Yes Garrett! I actually have an old video on this: ruclips.net/video/iM5t37xCv5g/видео.html

  • @handlaidtrack
    @handlaidtrack 5 месяцев назад +2

    You can have a library of settings? Awesome!

  • @MS-uz4ix
    @MS-uz4ix Год назад +1

    Forgive me, I am new to the laser game. The No Camera, No Problem tag. I've watched the video and understand what to do if I have a camera, but what if I don"t? Am I missing something? The example shown produces a result that uses the camera for the initial setup and then goes on. The engraving of the cats is naturally going to be right where you want it because the wood is in the same place as the initial setup that used the camera. I know it sounds like I am splitting hairs here, and I appreciate your videos. Just trying to get that alignment thing mastered without a camera.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад

      No, no camera is necessary, that was the entire point of the video! cover the bed in cardboard or paper, run a square, rectangle or circle anywhere on the bed the size of your work piece so it makes an outline, and drop the real work piece into the template. I only used the camera so you could see the process.

    • @MS-uz4ix
      @MS-uz4ix Год назад +1

      @@TheLouisianaHobbyGuy Understood! I was waiting for the part of the video where no camera was used. My error. Thank you for the clarification. Your videos are immensely helpful. One other question. How long would you say it takes to become proficient in the operation of a medium to large size co2 laser? I've had my Nova 63 a little over a month.?

  • @jackhelm9852
    @jackhelm9852 2 года назад +1

    Just curious, what sort of camera do you have setup and how do you have it rigged to your system? I have been thinking about getting one for my Diode Laser and the cabinet I am making for it.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      I have an 8mp board camera that I printed a housing for. I hot glued it to the top of my Co2 cover. When the Co2 is on, the lights are on and it looks much better.

  • @philderbyshire597
    @philderbyshire597 10 месяцев назад +1

    Your tag line makes us beleive you are showing us how to position without a camera ????????????????????? Nothing of the sort !! cOMPLETE WASTRE OF MY TIME .

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  10 месяцев назад +1

      I did show you that at 13:18. Sometimes you just have to watch the entire video!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • @ChrisSgaraglino
    @ChrisSgaraglino Год назад +1

    Love the. Idea, but it did bring up another question. You seem to have all your “material” in a library. Do you have a video explaining how to do that?

  • @patrickhealy91
    @patrickhealy91 11 месяцев назад +4

    Rich, you are literally a godsend when it comes to lasers and lightburn. Thank you for all the time and effort you've put in for the community.

  • @frauderycentral9398
    @frauderycentral9398 9 месяцев назад +1

    Awesome video. Sorry if this question is somewhere in the comments but I missed it. You mentioned a book of kraft paper. Where do you usually get yours? I'm trying to figure out the weight/thickness of the paper, etc. you are using so I can replicate this. I want the figure out the perfect kraft paper settings for the D1 Pro 10W so I don't end up with a bonfire as a template. hehehe

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  9 месяцев назад

      I use several different types, but almost any type is fine. Just adjust the settings accordingly.

  • @wyominghandcrafts7939
    @wyominghandcrafts7939 10 месяцев назад +1

    I'm new at using Lightburn and see when you hit start there is a dialogue box that comes up with --Laser on--Air on--focus set- work framed-- how do you do that, I have a problem remembering all those steps every time and then waste my material.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  10 месяцев назад

      Click on the wrench and screwdriver icon, the device settings. In the bottom right corner you'll see Enable job checklist. Turn it on, and then click Edit and put whatever you want in there.

  • @jquest90
    @jquest90 Год назад +1

    Wondering if you can help me out.? I am brand new to lasers and have purchased an Xtool D1 Pro. I am learning LightBurn (thank you for all the videos) and am very confused on which camera I should buy. LightBurn offers a 90 degree which j think is right for me but with all of the different options I am unsure of what to do.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад

      In Lightburn, click Help --> Camera Selection Help. It'll help you choose by bed size and mounting height.

  • @corneydasilva5831
    @corneydasilva5831 9 месяцев назад +1

    My problem is "repetition". When I try to do it again to reinforce the engraving (w/o moving the piece), it starts shifted from the original, now I have two images superimposed

  • @patrickhenderson1964
    @patrickhenderson1964 2 года назад +1

    Can you share the ATEZR materials library on your website? I will gladly pay you for it. I have the P20 Plus and would love to have a materials library. Thanks!

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад +1

      I'm still tweaking it Patrick and adding photo settings. It'll be ready soon for free download. Maybe today or tomorrow I'll be posting it.

  • @Chatz13
    @Chatz13 Год назад +1

    Hey brother how were you able to install your camera without making adjustments? The offset settings under camera control. I had to adjust all my settings x and y axis. Also height and width. I see all of yours are at 0

  • @michaelmartin8036
    @michaelmartin8036 10 месяцев назад +3

    As a new person into Lightburn engraving/cutting, your videos are spot on for me! You don't speak like John Moschitta (Remember the FedEx guy?), you talk to us like you are right there explaining things to us. Thank You!

  • @shadowpugx9725
    @shadowpugx9725 9 месяцев назад +1

    Did you set up your library based on previous projects and what worked for you, or did upload a library for your machine?

  • @AmandaBachman-s1i
    @AmandaBachman-s1i Год назад +1

    im having trouble getting miy image to be centered and not crooked. im engraving a triangle piece of acrylic like an award. im using light burn. with a boss 1420 ls

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад

      I can't help in a text Amanda. Try posting on my free forums. lahobbyguy.com/bb

  • @drasus233
    @drasus233 2 года назад +3

    another Awesome video! thanks Rich!

  • @JoepMeijer
    @JoepMeijer 11 месяцев назад +1

    How do you set the heigth of the laserhead. Do you measure the thickness of the material you engrave and then add the neccesary heigth you normally need to engrave>

  • @derek2593
    @derek2593 2 года назад +1

    Goodness.... I swear my focus distance changes depending on the position of the laser. Does that mean it's time for mirror realignment?

  • @frankmilazzo6727
    @frankmilazzo6727 Год назад +1

    How do you get Lightburn to display that reminder box before you start your project?

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад

      Edit --> Device Settings --> Tick off Enable job checklist and then click on Edit and type in there what you want to be reminded of Frank.

  • @josephculbertson3555
    @josephculbertson3555 2 года назад +1

    So Rich...how do I get a continuous picture on my camera. I just get a screenshot and then when I update camera I see the next shot but it doesn't show continuous video. What do I need to do to get this?

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад +1

      On a Lightburn camera? Just pull down the drop down menu and select the camera. If you want a screenshot as an overlay only for the workspace click update overlay,

  • @paulantonucci6933
    @paulantonucci6933 Год назад +1

    sir hello how are you me im still breathing and im 4 days away from moveinf to north fort myers but any way can you help im trying to make somthing with my ortur laser but the question is the svg file is for a 3mm wood can i use 5 mm wood or is there a rocket sciences to it .

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад

      The thickness of the wood only matters if you're joining it, like making a box for example.

  • @LifeHasLessons
    @LifeHasLessons Год назад +1

    can someone help me with why my laser wont move anymore?. it keeps saying homing cycle is not enabled. and cant seem to find a video with that problem when i type it in on here

  • @paulantonucci6933
    @paulantonucci6933 Год назад +1

    hello, sir can you help with a svg file it saids its for 3mm can i use 5mm or do i need a hammer to put it together i miss your videos i have been try to move to north fort myers . im warming up my hammer lol thank you

  • @nctplarry
    @nctplarry 2 года назад +3

    TERRIFIC!! I could write a long treatise to explain how helpful you're making the laser engraving experience for us, but suffice it to say, "WELL DONE!" and "HIGH FIVES"
    Thanks!

  • @rrbcap
    @rrbcap Год назад +4

    I’m a technologist and will be getting my XTool D1 Pro tomorrow. Subscribing to your channel as your tutorials are great for me getting started in this hobby. Cheers!

  • @everton_sa659
    @everton_sa659 4 месяца назад +1

    Very cool and important tip, thank you!!!

  • @johnwalko2060
    @johnwalko2060 Год назад +4

    I was having trouble lining up my wood with the laser .This fixed that issue I was having so easily!!! Thanks again Rich for all the awesome information!

  • @naturligfrihet
    @naturligfrihet Год назад +1

    Nice video! What kind of magnets do you use? like in size?

  • @Andy.H.H.
    @Andy.H.H. Год назад +1

    How do you get the "confirm start - Laser on? - Air Assist on?, etc dialog box when you push the start button? I'd really like this reminder every time I run a project because I tend to forget about the focus, air assist, etc from time to time.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад +1

      Edit --> Device Settings and tick on Enable job check list at the bottom of the window. Then click Edit and type whatever warnings you want.

    • @Andy.H.H.
      @Andy.H.H. Год назад +1

      @@TheLouisianaHobbyGuy Awesome! Thank you!

  • @rafaelrodriguez442
    @rafaelrodriguez442 Год назад +1

    Nice vid.
    Where can I get those magnets?
    Thx

  • @pavlentos
    @pavlentos 7 месяцев назад +1

    Nice trick. Thx , I'll try it today

  • @woodknack1
    @woodknack1 Год назад +1

    I have been looking at buying a 20W diode laser and have watched about all the videos of all the different ones. I think you have me sold on the ATEZR P20 Plus. Amazon has it right now for $999 with the air assist and a 15x15 honeycomb bed! Best deal out of all the 20w lasers I have found so far. Is there a way we can get your library for cutting and engraving the different materials that you have already made and setup in lightburn? That would really be a great start. Thanks for all you info and videos, they are very helpful.

    • @woodknack1
      @woodknack1 Год назад +1

      I found it on your hobby forum. Took a little digging around. Thanks again for all your info.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад

      Glad you found it! Use the search feature next time.

    • @woodknack1
      @woodknack1 Год назад

      @@TheLouisianaHobbyGuy what would you recommend for an enclosure?

  • @lonniedupont
    @lonniedupont 2 года назад +2

    👍👍👍👍👍

  • @MnACreations
    @MnACreations 2 года назад +2

    Thank you for sharing, Rich! Useful information1

  • @steriltech63
    @steriltech63 Год назад +1

    Hi I'm new to this and I mean NEW! I do Vinyl graphics this video is awesome! I just got a big Blue 60 watt Chinese machine can't wait to try it!!!!

  • @carlosa.valentin.ministries
    @carlosa.valentin.ministries 2 года назад +2

    Love your videos

  • @davidelder5399
    @davidelder5399 2 года назад +2

    such valuable information here Rich! who needs a camera THANKS for sharing 👍

  • @newsfan77
    @newsfan77 2 года назад +1

    How does this work if you do not have limit switches on your unit? Such as in the Xtool D1

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      You set and save a position on the move tab at 0/0. That saved position is your "home". Before you use the D1 and power it on, manually move the module to the 0/0 position. Turn on the machine and it knows it's at 0/0. Now you can use absolute coordinates to run your jobs as long as you *never move the laser by hand!* Any time you need to rehome the laser, just go the Move tab and choose the 0/0 position you set and clickl Go. A laser module is not meant to be moved by hand and I wish xTool would stop demonstrating that way!

    • @newsfan77
      @newsfan77 2 года назад +1

      @@TheLouisianaHobbyGuy Thanks Rich!

  • @createinspain
    @createinspain 6 месяцев назад +1

    I am new to laser cutting but like you I keep my scraps. I've started designing things like book nooks, miniatures and dollhouse furniture. Those scraps get used!

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  5 месяцев назад +1

      That is awesome! Wait until you see next week's video! Sounds like it's just for you!

    • @createinspain
      @createinspain 5 месяцев назад

      Oooh........interesting!@@TheLouisianaHobbyGuy

  • @deedahjohnson80
    @deedahjohnson80 Год назад +1

    Absolute coordinance??

  • @MarklTucson
    @MarklTucson 2 года назад +3

    Thanks! Your videos have been super helpful in getting set up and exploring the features of Lightburn.

  • @wildturkey9275
    @wildturkey9275 2 года назад +2

    Another excellent video. I have created a foam board template which is made of 1/8 inch thick foam board. I then pinned foam down to a backing board. I burned 9- approx. 4 inch circles into the foam and removed the off cuts. Now all I have to do is drop the coasters into the circles of the foam, line up the graphics inside the tool path for the 9 circle grid and burn. Remove the coasters from the foam drop in 9 more and burn again....

  • @olafb.2929
    @olafb.2929 Год назад +2

    Thanks for the tip, in my next project I will definately use it.

  • @MrSDNeo
    @MrSDNeo 2 года назад +2

    I’ve been doing it that way for months. And I’ve explained this exact method, although not using a temporary piece of cardboard, to people in the Facebook groups.

  • @thomascristaldi9303
    @thomascristaldi9303 Год назад +1

    Thanks for this

  • @whl040
    @whl040 2 года назад +2

    I just finished a batch of stitch markers for my wife, single sided coins. After this video I realized that had I placed a sheet of paper underneath I could have flipped them over dropped them back in the circles and made perfect two sided coins.
    Thanks, Rich!!

  • @LaserProjectGB
    @LaserProjectGB 2 года назад +2

    Another great video! Thanks Rich! A question .. at 4:10 of the video, after you click on START, I see a pop-up reminder, I wonder how did you create it. Thanks in advance

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад +1

      Edit --> Device Settings, tic off the icon at the bottom of the screen that says Enable job checklist, click Edit and add whatever reminders you want Gianni.

    • @LaserProjectGB
      @LaserProjectGB 2 года назад +2

      @@TheLouisianaHobbyGuy DONE !! Works ! It is clearly written in the Lightburn documentation ..... this means we don't read the manuals enough. Thanks Rich ! When you come to Italy you have a paid coffee :-)

  • @fourwheelcowboy7918
    @fourwheelcowboy7918 2 года назад +2

    What a great informative video Rich

  • @Dancopymus
    @Dancopymus 2 года назад +1

    Hi Rich, what laser machine are you using in the video and where do you get these magnets?
    There are so many laser machines that it boggles the users' minds.
    A year ago, I bought the Sculpfun S6 Pro and am looking to upgrade to the Sculpfun S10 Pro 10W or Sculpfun S30 Pro 10W but, I am starting to get doubt, so could you enlighten me?
    I want to use the machine for a small business (semi-professional?). Thank you if you can help me.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      Look at the link in the description below. The machine I used in this video and the magnets are both in the description.

  • @jbrunson1949
    @jbrunson1949 Год назад

    when marking the paper, I guess it is trial & error to get the correct power setting, as I have a X20 pro, and I have found that your power settings for other things seem to be a little higher than what I need, this thing really burns & cuts, most of the cutting I have done has been to much on the power, I have started tuning it down, and found that I can cut 3mm ply at 70 % , and 1 pass, I do need 80-90 to do 5mm solid wood like the coin chip you do, but thinking about cutting that back to about 60% and 2 passes.

  • @autoflowerhippie
    @autoflowerhippie Год назад +1

    You rock

  • @LarryDMitchell
    @LarryDMitchell Год назад +1

    Rich, I have a quick question. Background, I just received a OLM3 so I don't know if my process is the same as yours. I've assembled it but not installed LB yet. I thought you had to focus the laser to the project using the measuring pin on the laser. I didn't see you do that when you put the basswood on the bed for the cut. When you specifically selected the basswood, 2 or 3mm on the dropdown menu does that automatically set the focus?

  • @darrellconway3827
    @darrellconway3827 2 года назад +1

    Just Subscribed! Thanks for the quality content. What 10w laser would you recommend and why?

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      I don't recommend them Darrell, I review them though. Check out the playlist for product reviews.

  • @printfluencer
    @printfluencer 2 года назад +1

    I would probably cut the cardbord and not engrave it and then cut my peaces of wood etc. above the cardbord. Have done it the other way and my cardbord catched fire. :) Also this way the air can flow through the honeycomb under the cardbord and you get no burnmarks. #winwin

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      That's the way I usually do it Michael. I have about 50 cardboard templates: ruclips.net/video/iM5t37xCv5g/видео.html

  • @benvannazereth8777
    @benvannazereth8777 Год назад +1

    My new laser does not have a laser pointer. When I'm done with the project I hope for the best and prepare for the worst because it's never 100% right. This is a genius solution. 😃.

  • @freman
    @freman Год назад +1

    I just toss a tape measure over my scraps, but so far most scraps get used running test cuts/engraves of different things (making sure I got the layers right to get the engrave I want), those still go in the burn pile but nothing bigger than a few mm ever ends up straight in the burn pile.

  • @TheFalconJetDriver
    @TheFalconJetDriver Год назад +1

    Wow another great video showing a technique that really works! Especially when it comes to saving materials! When I was a newlywed in my early twenties that was one thing my wife made sure of! I never wasted good wood! I made a bassinet for our son from reclaimed and saved wood! Did I mention him too? 🤣🛫

  • @DeanWhiteUrbanPrintzSunderland
    @DeanWhiteUrbanPrintzSunderland Год назад +1

    I do this method too, but with the Kraft paper method, I'd actually cut the rectangle out completely so the wood is resting directly on the honeycomb. Less residue on the back of the wood.

  • @salpisano6433
    @salpisano6433 2 года назад +1

    I love this. Using this method, I found that I can use black 80wt cardstock using 6000/15% and get a nice gray outline.

  • @chrishale1021
    @chrishale1021 2 года назад +1

    Love your videos sir. I've noticed that my X-Tool doesn't always go back to the exact location after it goes to the Home position. In other words, I can make a template like this and run a job but once it completes and returns Home, there's no guarantee that template is going to work perfectly for the next run. I always frame and check it very closely. Maybe it's just an X-Tool flaw.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      xTool has a lot of flaws Chris, homing is one. Click Home in Lightburn between jobs to make sure it goes to the 0/0 position and it should work fine.

  • @danyodice1048
    @danyodice1048 2 года назад +1

    Interesting as always Rich. Do you have the Honey comb hold downs on your blog?

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      No, but they are free in my online store Dan: engraveandcutfiles.com/

  • @LarryBerg
    @LarryBerg Год назад +1

    Off topic question.
    Running macOS using supplied cable using an USB-A to USB-C adapter. Xtool D1 10 w
    I also posted on your forum. Thanks for the great videos by the way!
    The only software that connects is XTool Creative Space. It runs on this software.
    I am unable to get so lightburn or laser box software to discover D1. Kind of weird seeing how laser box and creative space is the same developer. I think. any help would be appreciated.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад +1

      Never used an Apple product, so can't help there. Try the Lightburn Software forum.

    • @LarryBerg
      @LarryBerg Год назад +1

      Thanks for taking time to reply.

  • @anniwood6373
    @anniwood6373 8 месяцев назад +1

    thankyou so much I was having no end of problems before

  • @PCJ52
    @PCJ52 Год назад +1

    Really terrific! My first laser, an xTool D1 pro, is on a UPS truck out for delivery right now. You've given me a great head start with your videos. It's greatly appreciated.

  • @raymondbaldenegro8399
    @raymondbaldenegro8399 2 года назад +1

    Great video as always. Quick question, how did you setup the confirmation pop up once you click the start button?

  • @jeffreycanfora1091
    @jeffreycanfora1091 2 года назад +1

    Perfect! I’m a diode user that uses a honeycomb bed which covers my waste board. I’ve recently started working in Absolute Coordinates on the 29” Eiffel Tower in the Engrave and Cut files. I’ve never taken advantage of the centering of the work icon in the upper tools (arrange long). I purposely got the 12”x12” Basswood for the tower to have extra strips of it for exactly the honeycomb bed pins because I wasn’t careful and my laser went over the hold-down pins… breaking them. This will take care of that and I’ll use a template and strips to make more pins. Those magnets are so strong that if they get close and connect to each other it’s a pain to separate them, but they work too. Anyway, thank you Rich for another great tutorial. Will now make good use of all the smaller scrap laying around.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад +1

      Awesome Jeffrey! I cut my hold down pins from 1.5mm basswood or any other thin material for just that purpose, so they snap off if hit. It keep from ruining the job, so the laser can just keep doing its thing.

  • @Stevon2012
    @Stevon2012 2 года назад +1

    Love your videos! I had an Idea: you could stick straight pins along one or two sides of the path burned on the cardboard and just push the material up to the pins, pull out the pins and burn. Easy peasy! 😉

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад +1

      I used to use push pins Steve. Once you make the holes in the cardboard and waste board the first time, they go right back into them.

  • @shellyparkerart
    @shellyparkerart Год назад +1

    This is the video I’ve been needing! I wasn’t sure how to correctly place items on the laser bed. Thank you so much again!

  • @vaughanza
    @vaughanza Год назад +1

    Rich thanks for another great video, love your channel. Fantastic

  • @Monztuh
    @Monztuh 2 года назад +1

    Nice video as always. I have an offline laser that I use without a near by computer so what I do is the same you did but without the card board. So the same circle you created for the coaster I make it do 4 to 5 passes at a slow speed about 600 to 800mm per MIN so I'll have plenty of time to perfectly align it before it starts the actual engraving. I have my power output on the lowest setting that my machine allows to show the laser as a guide which on my machine is a (.4). So it runs as 1 job the first layer does the aligning then it'll start the engraving job

  • @StephenBoyd21
    @StephenBoyd21 2 года назад +1

    Thanks for that amazing tip. I am thinking of getting a camera but maybe I don't need to.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад

      Cameras make it fast and easy, but this can do almost the same things Stephen.

  • @MarioBX1405
    @MarioBX1405 2 года назад +1

    Awesome hack! Going to help me use my scraps now! Thanks Rich!

  • @karenhadden4980
    @karenhadden4980 2 года назад +1

    Another great video!. I would love to see a video on getting the most out of scrap pieces without a Lightburn camera!

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад +1

      I showed you how in the 2nd part of this video Karen! The engraving of the cats. I use this method for all of my scraps.

  • @mirafly2007
    @mirafly2007 2 года назад +1

    Nice video like always,i use blue painter’s tape instead of paper.

  • @karenchidester43
    @karenchidester43 Год назад +1

    Brilliant! Thanks for sharing!

  • @rbrennan9148
    @rbrennan9148 2 года назад +1

    As always rich great video.

  • @ramsrjr
    @ramsrjr 2 года назад +1

    Thank you for everything you do! ron

  • @MarklTucson
    @MarklTucson 2 года назад +1

    This is really helpful for those of us just getting spun up on these tools. Thanks

  • @floridalove
    @floridalove 2 года назад +1

    Thanks Rich for this super effective tip! ...Today I did a Lightburn update to version 1.2.03. And now the selection of the German language is no longer available.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  2 года назад +1

      Oh no! Let them know on their forum. You can always downgrade to the last version until they get it fixed.

    • @floridalove
      @floridalove 2 года назад +1

      @@TheLouisianaHobbyGuy I did. I immediately downgraded to the latest version.

    • @TheLouisianaHobbyGuy
      @TheLouisianaHobbyGuy  Год назад +1

      Fixed in the latest update Jürgen. Download 1.2.04.

    • @floridalove
      @floridalove Год назад +1

      @@TheLouisianaHobbyGuy Thank you Rich for your comment. I already read it in the Facebook group this morning and installed the latest update. It works again.

  • @robeccs
    @robeccs 2 года назад +1

    Great advice chief👍🏼🍻

  • @VeeSwan
    @VeeSwan Год назад +1

    I learn something every day, and thanks to you, I continue to learn. I also refer your videos to others that are learning, thank you so much Rich for all that you do!