Cnc machining a zundapp 5 speed engine part2
HTML-код
- Опубликовано: 5 фев 2025
- For my next project im gone try to machine a zundapp 5 speed engine block.
Last time i made a 4 speed engine the 5 speed is a little wider to house the extra gear. so the center part of the engine has some more challenges to machine. In this part im machining the ignition carter and using the 5th axis to drill oil channels. also managed to do some real 5th axis moves.
"Billet Zundapp motor," words that have never before been uttered in history.
Impressive Stef how beautifully your own developed CNC milling machine works. Hats off and a deep bow.
Gday Stef, the 5th axis works great and the engine is looking fantastic, brilliant job as always mate and thanks for sharing your adventure, cheers
Hey Stef, thank you for demonstrating simultaneous machining. That was awesome.
ThNks for these videos. It’s nice to see what your machine is making after watching the making of the machine.
Halo Stef ik ben zeer impressed met jou werk ik ben 65 en woon 42 jaar in Australia in de jaren 70 had ik een AGS zundapp. 5speed. De zundapp heeft altijd een special plaatsje in my hart 💖 gehouden. Keep up the great work mate.
Your Dutch still seeps true, so does a Kaaskop end up in Australia with a Zundapp, that should be a very interesting story.
Greetings from Australia
Amazing work Stef.
DIY Epoxy Granite really works.
Blown away as always. Great job!
Great work as always Stef. I really enjoyed your videos! Nice to see hiw you are working with your trunion 5th axis.
Wow, such an amazing skill set to accomplish such a project as this! Just getting all the correct dimensions and details figured out, then CAD modeling all the components, then the machining skills, fixtures needed, etc. plus the hundreds of hours it takes to see a project through such as this. Can you do a video showing your technique for the reverse engineering of all the critical dimensions and details needed for such a project? I've done a few small motorcycle parts for fun by using my CNC router touch probe on an existing part to record the various dimensions need to CAD model and replicate the part. It works great for all the major hole locations etc. but getting all the curvatures to match is tedious and time consuming. It's kind of fun to then take the model, scale it down and 3d print a copy of it. At any rate keep up the good work and thanks for sharing!
It's indeed quite a feat! ...but not comparable to the fact that he built the whole CNC machine entirely, from scratch, including the 5th axis setup. Mind blowing.
@9:46 You need to manufacture a spring loaded tap follower. :-) Interesting project, thanks for sharing it, big thumbs up!!
Nice one, Stef! Can't wait for the next video.
Cheers,
Reuben
I am impressed again! :)
Looking great! Awesome work!
Wow!!! Awesome work 😱🤩!!! Congrats! 👏👍
For the 1st time I’ve seen a design I love, out of the many cnc videos I’ve been watching love the design of the milling machine, are you putting the designs up for sale?
Your machine cuts the best of any. Well done. What is your circular interpolation tolerance?
Van hier tot oeteldonk. Weer mooi werk.
good vid! perhaps you could explain how you overcame some of the more complex problems that youve encountered during this build.
You could make a tool that chucks it up and allows you to manually tap while spinning the spindle along with it to maintain the alignment. I preferred tapping by hand most of the time if it was only a few holes just to reduce any chance of ruining part even though all my machines are threading capable. All depended what i was making and if a one off part or not.
netjes stef. bedankt voor de 2d film
gr
Beautiful work !
Petje af hoor Stef. Mag ik je als verspaner wel nog de tip geven het kopvlak te vlakken met een vlakfrees voordat je begint met boren, uitkameren enz. Respect voor de bouw van je machine. Top.
Ik heb het bovenvlak als aller laatst vlak gefreesd dat mochten er toch interne spanningen zijn de pakking nog steeds op een vlak stuk zit.
Of Bedoel je eerst eens een keer vlak frezen met een offset zodat het vlak perfect vlak is wat beter is voor het boren? ivm scheef gaan?
@@Svanitterzon het is goed gebruik alvorens een verdere bewerking te beginnen bepaalde geometrische zaken op orde te hebben (Vlak kopvlak, rechthoekige flanken). Belangrijkste functie hiervan, is dat je nu referentievlakken hebt waaraan je je kunt oriënteren tijdens de verdere bewerkingen. Als je bevoordeeld een kamer wil meten alvorens verder te gaan met je bewerking, heb je nu een referentievlak waarvan je weet, dat hij vlak is, en waarvan je weet waar het nulpunt is. (Ik neem aan dat je tussen bewerkingen door stopt en meet).
Je kan het kopvlak prima vlakken en 0.2mm overmaat er op laten zitten, zodat je na je bewerkingen als allerlaatste nog een keer met de vlakfrees die 0.2mm eraf vlakt. Mocht je het niet vertrouwen dat de flens vlakken helemaal vlak zijn. Ik zou dit wel met een vlakfrees cyclus in een lineaire beweging doen en niet met een vinger frees. In de verspaning wordt dit zo gedaan omdat je hier de grootste vlakheid mee bereikt. Bij de vingerfrees heb je veel meer overlapping van de snijkant nodig. Verder denk ik niet dat er dusdanig veel spanning in zo'n aluminium kneetlegering zit dat het werkstuk "in elkaar zakt". Wat betreft het boren ligt het eraan wat voor boren je gebruikt. Met een carbide of ubo maakt het niet zoveel uit of het compleet vlak is. Wij boren met carbide zelfs onder een hoek van een paar graden in materiaal.
Maar goed, belangrijkste is dus dat je een referentie vlak creëert waaraan je je kan oriënteren, meten, nullen enz.
Ik hoop dat je er iets aan hebt. Succes met je projecten!
You did a great Job!
Great work, great video. Thanks!
Hi Stef, is there belt tension in your trunnion? I think that adding some or increasing the tension will help with the 5 axis simultaneous movements. Without tension your gantry might have backlash when it changes direction since the belt has play.
Stef where are you? Loving watching your builds
Great work! Do you sell this items?
Super impressive 5th axis trunion, did you build this yourself?
Great job! 👍👍👍
Perfect job, i try to imagine what will cost those pair of housing...
Hi, I've recenty discovered you channel and I'm in awe. Do you have any more information on your mill build? Extremely interested to know more about this. Thanks.
Amazing! Easily can adjust the block to fit such cylinders like honda cr125
looks incredible :D
Where do you gel Aluminium? Local shop or web?
hey Stef, really nice project. is it possible you open order for me for custom billet order? please let me know Stef
Mooi werk man..👌
Great video once more ! you should have more views then this.
Absolute great
What is your coolant concentration as it looks like a pure water. ?
I use synergy 735 which is a clear coolant.
@@Svanitterzon ohh... too expensive for my 1000 litre bath xD
Did you ever loock under the railcover to see if the covers work how they should?
And what cind of coolant do you use?
Unfortunately there are chips getting under the ways. I try to clean them frequently. But most of them stay out luckly. For the coolant i use synergy 735
Please show us this bike when it is running.
stefan and peter would like this too
Это колдовство и магия!
prachtig werk maak je
That looks so cool! What CAD software do you use? I'd love to learn to CAD and CNC. Where to start though?
Start with Fusion360 as it’s free
@@boru-cnc thank you!
@@vinnymorrissey7357 there is millions of tutorials on Yt about fusion cad and cam as well. Good luck 🤞
Hoe heb je eigenlijk alles zo goed in 3D na kunnen maken? Goed opmeten met een schuifmaat, of meet apparatuur?
Ik heb eerst mijn freesbank als een soort van cmm gebruikt om alle gaten uit te meten. Dus waar alle asgaten zitten en montage gaten. Daarna heb ik een sketch gemaakt met de contour vorm gewoon een ongeveer vorm getekend en daarna 1:1 uitgeprint op papier en gepast. herhaal die stap een keer of 20 en je krijg een redelijk nauwkeurige contour vorm.
De rest van het binnenwerk heb ik met de schuifmaat opgemeten.
@@Svanitterzon dat is wel een slimme manier op het met een freesbank op te meten , heb er zelf helaas niet de luxe voor maar hopelijk ooit nog een keer. Dank voor de reactie en succes nog met het project!
I never saw anything like this in my life
Leuke video stef! Kijk uit naar de volgende. Wat voor besturing zit er op je bank?
Dankje! ik gebruik edingcnc.
@@Svanitterzon nog nooit eerder van gehoord. Lijkt het op fanuc/g code? Ben zelf meer bekend met heidenhain. Doe je ook dit soort werk als werk, of is het puur voor de hobby?
@@01Pascal01 de freesbank is zelf gebouwd en Edingcnc is een besturing die veel door zelfbouwers wordt gebruikt. Nee die is allemaal puur een iets uit de hand gelopen hobby😃
@@Svanitterzon mooi werk man! Freesbank ziet er ook netjes uit!
@@Svanitterzon I has a small project in mind is there a way we can discuss about it ?
Mind blown :)
Respect
I was reading your thread on cnc zone but the pictures are offline, can you share the building pictures of the VMC on Google drive? I'd be very thankful if you could do that, I'm intended to build your project, thank you
you can view the pictures here, my webspace doesnt have the right ssl certificate so most browers doent show my pictures anymore.
gallery.svitterzon.nl/?jgall_dir=vmc%2F
@@Svanitterzon thanks it worked, do you know if is there a way to make the automatic tool changer without a servo motor on the spindle?
@@Svanitterzon why you disappear ??
@@mhshmo49fabio49 iam still alive, but last halve year i have been busy with redoing a house and still busy with that so no time to work behind the machine unfortunately.
@@Svanitterzon I wish You all Blesses, I have Qs and a request ;
Im on my DIY CNC 5AXIS as same as Your configuration little diff. in structure design
- Do You think that EDING controller is the best as motion controller ??
- Do You know about ADTECH 6090 6axis controller "I wasnt able to find diff. with EDING CNC 760" if You know which is best ?
- Can You upload Your "cnc-building" video ... Thank You :)
Awesome!
fucking good job . on the best home made cnc ..i have one old maho 400T cnc haiden hain 355 not fast machine but very precise machine 0.01 on a square 10 x 10 mm
Nice
11:39 What trunnion is that?
Builded my self, there is a video serie about it on my channel.
очень сильно хочеться заниматься конструированием моторов .
но нет свободного времени для этого
Contents like this should be banned! It's machining porn!
Just kidding. It's AWESOME. Thank you
Agen new cnc build
ktoś kiedyś dawno temu wymyslił koło ale czy ono jest przykręcone na 2 ,3 ,4 ,5 czy 20 szpilek to co to za różnica mój pies jak nie ma co robić to jaja liże i z tego jest chociaż użytek taki ze ma czyste
Nie wiem co ma koło do frezarki, ale napisałeś tak posrany komentarz ze się uśmiałem przy porannej kawie.
ok
11:03 it looks like both axes dont move synchronous.
Explorer Bike
Lost-foam cast would be easier and simpler.
And lot of cheaper