@@РоманРоман-о3жДа не факт что он вещает из Китая, просто показывает китайское производство. Я вообще не уверен что главной целью, является показать как делают цепи.
معلش ليه المطرقه تضرب راس بوتين لا راس حلف الناتوا الي بيساعدوا اوكرانيا لو عايزين سلام مكنوش ساعدوا اوكرانيا هما بيصبوا البنزين علي النار بس المساعدات الي بتبعتها الدوال متقلقوش في ايد امينه في ايد بوتين ❤❤❤❤❤❤❤ الدب
@@ncooper8438 First it is checked visually, each weld is ground and visually checked, sometimes they are random checked ultrasonically and final test is calibration. Each chain is pulled to it's final lenght, that insures each link will fit in the ship's windlass, but most importantly, it is a test of strenght. Calibration is streching, that is actually plastic deformation. Nominal load of the chain is less than that, so if weld can withold that stress, it is good. After that there is a braking test. They cut a sample of three links from each batch, sometimes even from every chain and break it.
قال الله لا إله إلا هو ( لَقَدْ أَرْسَلْنَا رُسُلَنَا بِالْبَيِّنَاتِ وَأَنزَلْنَا مَعَهُمُ الْكِتَابَ وَالْمِيزَانَ لِيَقُومَ النَّاسُ بِالْقِسْطِ ۖ وَأَنزَلْنَا الْحَدِيدَ فِيهِ بَأْسٌ شَدِيدٌ وَمَنَافِعُ لِلنَّاسِ وَلِيَعْلَمَ اللَّهُ مَن يَنصُرُهُ وَرُسُلَهُ بِالْغَيْبِ ۚ إِنَّ اللَّهَ قَوِيٌّ عَزِيزٌ) سورة الحديد من القرآن العظيم ❤
@@petert3355 The welding is not always necessary, when the assembled chain is proof load tested the force causes the sides of the link to firmly grip the 'stud'. However, I think this factory does weld the studs in for extra security, perhaps later in the video or on another video.
Hallo saya dari Indonesia, saya suka banget liat konten nya Karena menurut saya chaneal ini sangat memberikan pengetahuan tentang pembuatan hal hal yang ada di dunia ini, Terimakasih sudah membuatkan Vidio yang sangat memberikan pengetahuan lebih jauh
An anchor chain is obviously only as strong as its weakest link, so quality control is a paramount concern. No doubt, each batch of steel rod is tested for tensile strength and hardness. Consider the potential liability of a ship running aground because of a broken anchor chain. There is no room for error in the manufacturing of anchor chains. This was a very interesting video.
Each chain is tested. Material is usually not tested, since it is purchased from known supplyers according to standards. However, samples of each batch of the material are tested in steelworks before delivery to the chain factory.
@@David-dl6zg If closed captions are turned on. I see at 1:13 they are "testing the composition of iron" It seems they don't make this chain from steel 😆
Maybe today, but have a think about how this was done in the late 1800's early 1900's. For example, think about how the anchor chain on the Titanic was made.
Фильм неплохой, если бы ещё херню в титрах не писали, типа "Если этот молот ударит по Путину, то война на Украине была бы закончена..." А если Путин ударит своим молотом по Украине, то от Европы хер что останется...🎉
Дорогой китайский друг, если, как ты написал, ударить этим молотом по Путину и война сразу прекратится-возможно... Тогда,, она будет у вас. И самое главное, совет-трудись(хорошая работа) и не лезь в политику, каждый должен заниматься СВОИМ делом. Успехов. 😊
Depends a little on the size of the chain (bar diameter, link length, etc) but those machines would likely make a length of that size chain each day. A standard chain length is 15 fathoms.
I think they do 90-100 parts a day (24 hours, 3 shifts). How many parts will have a ship ? I don't know, but much, maybe 100-150 meters. Wow, how much weight per chain this will be 😯.
When studying in marine college for my 2/E certificate, we had a visit to a chain works in Cardiff. Very impressive like this one. In the factory yard, there were large numbers of second hand chains and anchors. They were all under Customs bond for some reason. I didn't think that there would be a thriving smuggling operation with ships' anchors
Customs Bond is nothing unusual. If the parts are only on site for repair and will be going straight out of the country the business can set up a Bonded area which is Customs Duty free. It saves a lot of paper work that doesn't gain anybody a tax.
@@davidquirk8097 That makes good sense, although I doubt if that factory in Cardiff is still in business now, with the downturn in British shipbuilding.
@@billynomates920 Unfortunately, I doubt if the factory is still there. It was in the 1970s when I attended Marine College and visited the factory. Since then, Cardiff's docklands have been turned into "Cardiff Bay", a complex of coffee shops, marinas and posh apartments! Most of the heavy engineering in the city has been lost- sad times
Вроде интересное видео.. нахера трогать Путина..чепушила, если Путин пришлет Кинжал, некому будет снимать видео. самого производства больше не будет, где бы оно не находилось.. и ещё, мировой способ литья цельных якорных цепей, придуман в России, в моем городе, моим земляком. Фамилия его Фомичев. А тебе дизлайк за тупость.
Kami pendukung dan pecinta Putin, ayo pasukan Rusia dan Putin maju terus tidak boleh mundur selangkah pun imbangi kekuatan dunia yang dikuasai Amerika cs 💪🏽
The sound track is as if I'm watching Game of Thrones. I can't imagine making chain by hand, everyday, doing exactly the same simple task. I guess it gives one time to dream...
Ésto si es un documental bien hecho gracias por compartir tus vídeos con el resto del mundo y ya tienes un suscriptor más saludos desde Cúcuta Colombia 🇨🇴👍
Those of you who are suffering from stress and depression, I wish you that all your problems will pass and wish you a beautiful, pleasant and peaceful life....
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I love watching stuff like this!
А если это молот ударит вам по лицам где закончится война?🤣
По плоским жёлтым мордам.
@@bot700 у них и так морды, как лопаты с глазами. 😂
😂👍❤تعليق رائع
Лучше этим молотом по яйцам всем тем, кто поддерживает украинских нацистов.
@@ГеоргийБелов-х3гПоказывают Китай, а канал явно не из Китая. Кому-то очень хочется срача между Россией и Китаем. Как же вас легко купить.
Loving the subtitles, if you don't have them turned on, check them out
Haha neat!, thanks I didnt know
They are fire :P
Life is all about the beating. gotta laugh. TY Lucas. was hilarious.
When life is a process of constantly being beaten, there is nothing like the taste of some nice, ripe iron.
Great video. Appreciated the factory sounds and no commentary instead of loud obnoxious music.
Now that is a New York bike lock chain!
Если этот молот ударит по башке того кто писал субтитры у него в черепе может зародиться мозг 😅😁
Браво маэстро!
У ватного рабсиянина мозг уже никогда не зародится
Будет только гул, мозг формируется еще в зародыше человека), а этому индивиду уже ничего не поможет
Если бы зелю таким прессом да разочек, второго бы точно не понадобилось
Золотой ты мой человек. Вроде делают китайцы, а салом за километр шмонит.
Оставьте свои пожелания при себе , молот ударит по всем врагам России !!! Ждите и оглядывайтесь !!!!
Полностью поддерживаю
中国にも素晴らしい職人がたくさんいるんですね！いい仕事！
日本の職人は世界のお手本🤩🥳🥳
Молодцы, прогиб в субтитрах засчитан.
"Молодцы", сосут концы, обычно у западных эфенди.)
Покажите субтитры товарищу Си. И автор уедет к нам в Сибирь под молотки
@@РоманРоман-о3жДа не факт что он вещает из Китая, просто показывает китайское производство. Я вообще не уверен что главной целью, является показать как делают цепи.
寒い時に見る動画
10 28 минута,сверлом тебе дупло шлифануть,по любому ума прибавится.
Amazing how much work and testing goes into just making a chain
معلش ليه المطرقه تضرب راس بوتين لا راس حلف الناتوا الي بيساعدوا اوكرانيا لو عايزين سلام مكنوش ساعدوا اوكرانيا هما بيصبوا البنزين علي النار بس المساعدات الي بتبعتها الدوال متقلقوش في ايد امينه في ايد بوتين ❤❤❤❤❤❤❤ الدب
well done, nice texts.
Very good job 👍✨ from chinise brother 🙏 congratulations for you from France 🇫🇷
Подлость ваша, нарывается на ответное оскорбление, упоминающее ваши детородные органы, помещённые под 5-ти тонный пресс, дабы меньше в мире было зла.
Только причём туТ ВЛАДИМИР ВЛАДИМИРОВИЧ-он вам эту цепь намотает куда надо
I wish we got to see the complete process of one chain rather than little snippets of a dozen different chains.
That's awesome...! Thanks, keep up your awesomeness and go enjoy some nature today...
Great video! Takes a lot of amps to weld the links!
my guess is few thousands : 2000 .
How do they test the strength of the weld?
@@ncooper8438 First it is checked visually, each weld is ground and visually checked, sometimes they are random checked ultrasonically and final test is calibration. Each chain is pulled to it's final lenght, that insures each link will fit in the ship's windlass, but most importantly, it is a test of strenght. Calibration is streching, that is actually plastic deformation. Nominal load of the chain is less than that, so if weld can withold that stress, it is good. After that there is a braking test. They cut a sample of three links from each batch, sometimes even from every chain and break it.
The method reminds me of a bandsaw blade welder. Touch the ends together and they melt into each other.
@@robertwest3093 Essentially it is very similar, it is a sort of resistance welding.
قال الله لا إله إلا هو ( لَقَدْ أَرْسَلْنَا رُسُلَنَا بِالْبَيِّنَاتِ وَأَنزَلْنَا مَعَهُمُ الْكِتَابَ وَالْمِيزَانَ لِيَقُومَ النَّاسُ بِالْقِسْطِ ۖ وَأَنزَلْنَا الْحَدِيدَ فِيهِ بَأْسٌ شَدِيدٌ وَمَنَافِعُ لِلنَّاسِ وَلِيَعْلَمَ اللَّهُ مَن يَنصُرُهُ وَرُسُلَهُ بِالْغَيْبِ ۚ إِنَّ اللَّهَ قَوِيٌّ عَزِيزٌ)
سورة الحديد من القرآن العظيم ❤
Impressive process ! 👍
Thanks🥰
@@Satisfyingtech116 You're welcome
Amazing.. great video
Interessante é a quantidade de material pra fazer uma corrente dessas . Com o preço do aço nas alturas não fica barato. Exelente vídeo 🇧🇷
🥰
Awesome vid!
Very nice work, thank you 😊😊😊😊
Приплели так приплели,👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮
Wow, how big the chain is!
Tolles Video 👍👍 gut zu sehen wie eine große Ankerkette hergestellt wird. Sehr schön .
BONJOUR ! MONSIEUR, merci de nous faire voir ce process, chaines à étais marine. A quand pour les ancres? merci à bientôt.
I wondered how the cross bar was put in the links of these massive chains. Very interesting production operation.
The interesting part was that the cross bar did not appear to be welded into the link.
@@petert3355 The welding is not always necessary, when the assembled chain is proof load tested the force causes the sides of the link to firmly grip the 'stud'. However, I think this factory does weld the studs in for extra security, perhaps later in the video or on another video.
That's pretty cool!
Really hard and perfect work
Perfect for locking up my bike thanks
Если это технический фильм, зачем Вы политику вставляете в переводе ?
Риторический вопрос😢
Японию вообще сложно понять. Несмотря на Хиросиму США у них остаются друзьями 🤔
你管山管海😅
@@Aleksandr2855It's hard for dummies like you to understand because the video is from china not Japan
@@Aleksandr2855 точно, мало им было Хиросимы, всё забыли. Теперь прогибаются перед Америкой, ну никакой гордости..
impressed by the whole video
A chain is only as strong as its weakest link.
Quite the process on a large scale and refreshing to see the continuous ongoing of quality control.
✌😎
Ô
Отличная шутка про молот, помечтай об этом в ютубе
По Байдену даже бить не надо.
Достаточно плюнуть посильней.
Озолотить струёй.
It's very good.
Hallo saya dari Indonesia, saya suka banget liat konten nya
Karena menurut saya chaneal ini sangat memberikan pengetahuan tentang pembuatan hal hal yang ada di dunia ini,
Terimakasih sudah membuatkan Vidio yang sangat memberikan pengetahuan lebih jauh
An anchor chain is obviously only as strong as its weakest link, so quality control is a paramount concern. No doubt, each batch of steel rod is tested for tensile strength and hardness. Consider the potential liability of a ship running aground because of a broken anchor chain. There is no room for error in the manufacturing of anchor chains. This was a very interesting video.
Each chain is tested. Material is usually not tested, since it is purchased from known supplyers according to standards. However, samples of each batch of the material are tested in steelworks before delivery to the chain factory.
1:10 into the video, they're testing the metal aren't they?
@@David-dl6zg If closed captions are turned on. I see at 1:13 they are "testing the composition of iron" It seems they don't make this chain from steel 😆
Thank you for the compliments. All the best.
Would you trust Chinese quality control?
Причëм здесь Путин и Джамбул ( наши поймут) ?
I've subscribed..
Таким бы молотом по США и Украине…
Им и без молота скоро пи..ец будет
Согласен
А чем тебе Украина не угодила?
@@МиколаБуць-ю8ш не Украина, а ее руководство. Смысл ответа был на коммент в самом видео.
Жаль, не показали, как сращивают кованные половинки. Работа, конечно, вызывает уважение - все таки от крепкости цепи иногда зависит судьба судна.
Сваривают, контрфорс вообще просто вставляют
5:55 недоумок
@@Star69ca там сгибают)
2:40 тож)
Another world .. Respect ..
Extraordinario y sorprendente proceso de fabricación.
アンカーチェーンマニアにはたまらない動画だな
Looks like the machines are doing 99 percent of the work interesting video thanks
Maybe today, but have a think about how this was done in the late 1800's early 1900's.
For example, think about how the anchor chain on the Titanic was made.
Time for some new doors on the welding machine!
Если этот молот ударит по всем лидерам США, то в мире воцарится мир и согласие.
Congratulation for Amazing video
А если ударит по башке автора ролика, то ничего не произойдет. Похожий ролик будет снят кем то другим
Tôi sẽ luôn ủng hộ kênh này cho bạn. Bạn hãy làm nhiều video như thế này nhé
Beautful Work
FAntastic production, actually understandable machine functions. Well done.
Geat video and subscribed
Фильм неплохой, если бы ещё херню в титрах не писали, типа "Если этот молот ударит по Путину, то война на Украине была бы закончена..." А если Путин ударит своим молотом по Украине, то от Европы хер что останется...🎉
Кому-то не нравится сближение России и Китая. Канал явно с гнильцой.
Если яйцами ударить по яйцам то они в сё равно пострадают ведь правда? 🤔
Рutlеr kарutt !
i like it nice making bhai
Дорогой китайский друг, если, как ты написал, ударить этим молотом по Путину и война сразу прекратится-возможно... Тогда,, она будет у вас. И самое главное, совет-трудись(хорошая работа) и не лезь в политику, каждый должен заниматься СВОИМ делом. Успехов. 😊
Love the smell of cutting oil first thing in the morning!
How many years does it take too make one chain
Depends a little on the size of the chain (bar diameter, link length, etc) but those machines would likely make a length of that size chain each day. A standard chain length is 15 fathoms.
I think they do 90-100 parts a day (24 hours, 3 shifts). How many parts will have a ship ? I don't know, but much, maybe 100-150 meters. Wow, how much weight per chain this will be 😯.
Good stuff!
El hierro solo existe como mineral, lo que se obtiene de este es el acero al añadirle diferentes proporciones de carbono.
Exelente material amigo felicidades, me gustó mucho
These guys are taking a big chance. I don't see even one safety flip flop or safety squints.
until the very end, some truck driver and his steel toe crocs!
They show how a Kenter shackle is made and then regular chain. Superb manufacturing.
When studying in marine college for my 2/E certificate, we had a visit to a chain works in Cardiff. Very impressive like this one. In the factory yard, there were large numbers of second hand chains and anchors. They were all under Customs bond for some reason. I didn't think that there would be a thriving smuggling operation with ships' anchors
Maybe made with sub standard materials and sold as meeting specs, or something of that nature.
Cool, when was this? Just glad to hear we still have some heavy industry left.☺
Customs Bond is nothing unusual. If the parts are only on site for repair and will be going straight out of the country the business can set up a Bonded area which is Customs Duty free. It saves a lot of paper work that doesn't gain anybody a tax.
@@davidquirk8097 That makes good sense, although I doubt if that factory in Cardiff is still in business now, with the downturn in British shipbuilding.
@@billynomates920 Unfortunately, I doubt if the factory is still there. It was in the 1970s when I attended Marine College and visited the factory. Since then, Cardiff's docklands have been turned into "Cardiff Bay", a complex of coffee shops, marinas and posh apartments! Most of the heavy engineering in the city has been lost- sad times
Been looking for a video of this caliber.neat.
Don’t subscribe to me yet?：）））
Вроде интересное видео.. нахера трогать Путина..чепушила, если Путин пришлет Кинжал, некому будет снимать видео. самого производства больше не будет, где бы оно не находилось.. и ещё, мировой способ литья цельных якорных цепей, придуман в России, в моем городе, моим земляком. Фамилия его Фомичев. А тебе дизлайк за тупость.
These MEN have REAL JOBS!
No burger-flippers here!
Excelente Documental ÷
Thanks for the sharing this video
Thanks🥰
nice vidio but you need to keep the words up longer most of us aren't speed readers
Thanks
Mastermind Creation #1 in the world China. Don't hate now! Excellent skills set too. I hate you haters! That downs there creations!
I live in the town where they used to do this by hand, the company A Hingley made the chains for the titanic
The chain makers of the ‘Black Country’ in the Midlands of the UK, renowned workers.
And I bet those chains are hardly worn at all !
These guys are pretty Metal.
Parabéns pelo trabalho magnífico de vcs Deus abençoe a cada trabalhador
Thanks 🥰
Now that was satisfying
Kami pendukung dan pecinta Putin, ayo pasukan Rusia dan Putin maju terus tidak boleh mundur selangkah pun imbangi kekuatan dunia yang dikuasai Amerika cs 💪🏽
Putin will see an end by the hands of his own people. The only war Russia is going to win will be against the evil power that runs it.
أحسنت استمر يا بطل جميل جدا روووعةجداً
Температура - промышленная тайна? Ну, ну) любой металлург определит температуру по цвету раскалённого металла.
The big links were truly impressive
Если этот молот ударит по ГитлерШольцу,то фашист не успеет и обосраться 😅
Рutlеr kарutt !
@@ХерлокШолмс-т7чШерлок Холмс террорист
Thanks for reminding me what the world has to compete against. Industrious, scrupulous and intelligent is a hell of a combination.
Maybe not a competitor, maybe a partner🤣🥰
Trabalho magnífico
THANKS
😮😮, AMAZIN
Это же сталь не та из чего зделоны ЛЕОПАРДЫ?
The sound track is as if I'm watching Game of Thrones. I can't imagine making chain by hand, everyday, doing exactly the same simple task. I guess it gives one time to dream...
Причем тут Путин? Отписка,диз...
nice... i want one... make it red or yellow... thanks...
Относительно Путина совершенно не остроумно, осылаю к Европе и Соеденённым Штатам.
_Thank you very much!_
Un beau travail fort pour l'industrie.
Ésto si es un documental bien hecho gracias por compartir tus vídeos con el resto del mundo y ya tienes un suscriptor más saludos desde Cúcuta Colombia 🇨🇴👍
Those of you who are suffering from stress and depression, I wish you that all your problems will pass and wish you a beautiful, pleasant and peaceful life....
Видео залипательное, класс! Но субтитры об молоте и прочая хрень, зачем это, Ляо?
As some one who have experience with molten metals there is nothing relaxing in it when you remember it warm as hell
Что за наезд на Путина? Дизлайк