Это видео недоступно.
Сожалеем об этом.
Making a Stick Bait Step by Step, Sardine Stick Bait DIY
HTML-код
- Опубликовано: 19 сен 2020
- I have been wanting to make a stick bait lure with a narrow body like a sardine, so instead of designing my own lure I pulled a photo of a sardine from the internet. Then I decided to carve the lure from a new material for me. This stuff can be worked like wood but will never absorb water or rot. www.amazon.com...
/ engineeredangler
www.instagram....
/ engineered-angler-9424...
/ @engineeredangler
Affiliate product links
Affiliate product links help support the channel. As an Amazon Associate EA earns from qualifying purchases found in the links below.
Lure Parts:
Bargain Lure Eyes: amzn.to/3Hd1zVg
Spinner Wire: amzn.to/3obAtVz
Bulk Wire (I use the 174lb): amzn.to/3qk2pJx
SS Straight Wire: amzn.to/3C8CuHn
Mold Making Silicon:
Smooth-on fast: amzn.to/3o6r2rN
Smooth-on oomoo 30: amzn.to/2ZGM4nA
Specialty resins’ mold silicon: amzn.to/3G10gXX
Casting Resin
Specialty Resins’: amzn.to/30ZheHy
Alumilite white: amzn.to/3E4jdbE
UV resin:
amzn.to/3nPvvOa
amzn.to/3my4UWv
Glues:
Super Glue (may favorite size): amzn.to/3wrjD94
Larger size super glue: amzn.to/3mUmfJv
Super Glue accelerator: amzn.to/3EWJEQM
Spray on glue: amzn.to/302FEic
Paint Sealer, Mid-Coat:
Minwax Polycrylic: amzn.to/3oaBU6F
Floor Wax: amzn.to/3bQRgHN
Spray on Cleat Coat:
Krylon outdoor clear: amzn.to/3n2fQfv
2K Automotive Clear small batch: amzn.to/3qetApn
Clear coat 2-part resins:
Amazing quick coat: amzn.to/3d1uD4f
East coast resin: amzn.to/3jTYWNO
Good lower coast alternative: amzn.to/3H2r1fV
Chrome spray:
SpazStix: amzn.to/2ZK0zqp
Molotow: amzn.to/3jWkIRd
Looking Glass: amzn.to/31gaXXv
UV Lamps
UV LED Nail lamp amzn.to/3jVdwF2
Basic UV nail lamp amzn.to/3pTPIoP
UV Spot light: amzn.to/3mBdsvX
Airbrush:
Full setup: amzn.to/3GIIMRe
Beginner airbrush: amzn.to/3CC7gJs
Iwata Revolution: amzn.to/3bwiOlI
Iwata high performance: amzn.to/2ZCqSi6
Texture stencil: amzn.to/3kfzd2C
Fly Tying Stuff:
Excellent fly tool starter kit: amzn.to/3xEY5GL
Flu tying materials kit: amzn.to/3D1OavS
Paints:
Badger ghost tints: amzn.to/3buSFnd
Createx paint set: amzn.to/3nR9Vcl
Excellent high quality paint set: amzn.to/30bLcaL
Hand Tools:
Hemostat set: amzn.to/32N4nbS
Twisting pliers: amzn.to/3wd314U
Hand drill: amzn.to/3q0NWlJ
Wire bend pliers: amzn.to/3nMMm4n
Twistech wire former: www.jannsnetcr...
Sanding sponges: amzn.to/303Myo2
Sanding Board: amzn.to/3wqr2oY
Flush cut saw: amzn.to/3ESdeXu
Coping Saw: amzn.to/3kjoLY5
Mini plier set: amzn.to/3mWIjDn
Wire cutters: amzn.to/3EWpvdr
Power Tools:
Bandsaw: amzn.to/3mvGkWi
Drill bits: amzn.to/3CvHZ3H
Lathe: amzn.to/2ZHtdYW
Wen Belt sander: amzn.to/3jWqz92
Pistol grip rotary tool: amzn.to/3bRj4Mj
Light duty cordless drill: amzn.to/3C7jMjn
Benchtop drill press amzn.to/3EV8wYV
Agree, the actual wood block used makes it a much better calculation for density. I have cut blanks from a plain sawn board. It is amazing how the density can varies.
That’s slick using the little baggie to mix the epoxy, all kinds of applications for that.
The little plastic ziplock bag trick is great! The lure is looking good too..
Thanks 👍
Seconded. Brilliant.
Sunday is fine, great tips for stick baits. Never thought of placing wire harness from the top. 👍
Thanks.
I'm loving your videos and this one is right what I need. I target Northern Bluefin tuna (Longtails) with both lure & fly gear and tuna stickbaits are what I'm having fun building ... the technical details are very helpful. Thanks.
Happy that you find it helpful
I’m an extremely novice lure maker and your videos are very helpful. Thank you for explaining things so well and showing the steps instead of just telling us what you did. Keep up the great work!!
Glad it helps...
your wire slot design is super clever, I may have to try it myself.
Sunday uploads are excellent.
The backwards forstner...brilliant!
Hi Franco, any day of the week is great for me as what is important is the good material you will share with all of us!!!
Cool, thanks
Awesome to see such a variaty of lures getting build . From swimbaits to topwater and an amazing stickbait! Thanks for sharing! I will stay tuned for the next build!
Glad you enjoyed! Thank you.
Nice job. I have used same material, but it’s not cheap I Brazil, so I do when I get some remain material from any friend who works in sign and poster project.
Congratulation to you channel and nice videos.
Thank you,
Boa pesca.
My god Man, I love your videos so much! I'm basing my baits and my channel on your advices! I just wanted to let you know that you are one of my master and I really appreciate the passion you put in it and the high knowledge you share with us!
Thanks. (Sorry for my english, I come from Pasta)
Your English is very good 👍 thanks for the kind words.
So interesting way to calculate the final weight of the lure!! Thanks a lot!
Thank you for watching
So interesting. You can post any (all) days of the week. I am notified of your posts and like this morning. I made my coffee and just sat down to watch full screen. Always enjoy your clear explanations and techniques. Thanks.
Thanks so much!
Sunday’s are fine
Отличное видео! 👍
Another great video, and i”m always looking forward to your next one. For me, any day you upload is fine as I usually watch in the mornings before work. Thanks again, Fran in NC
I appreciate that!
I learn from you🙏
Enjoyed your testing of home-made lures from your boat and actually got strikes and fish on. Would love to see more actual fishing vids on home made lures. Also what about surf fishing lures. In the Midwest we don’t get a chance to do much of this except on the Great Lakes beaches.
Coming soon! I'm a total novice surf fishing with lures but, I'm totally stocked to make lures for that exact purpose.
Great video. I’ve been doing the harness slot on the bottom for all of my through wire baits but I’m definitely going to use the top. You made a lot of sense about the durability of having the wire tucked into the drill hole. Thanks!
Glad it helped
Thanks for all your video's can you show how to put wire through with out cutting in half and lure be broken back thanks
I have a few videos where I show that technique.
One thing about that PVC, do not make the lure too thin. The pvc has a tendency to snap when it is too thin. Cedar would be much stronger, and you can soak it in a number of things to make it even harder. Also, the pvc will stretch under pressure, so screw eyes will eventually pull out. The wire harness is a good idea.
At 8:30, I thought you might put it on a lathe and take it down some. Great job showing us each step!
I thought abut the lathe...that will be another experiment.
I use the pvc foam board for my one offs and my models!.... great stuff, being a builder I get it free, well left over free....
another great video. coming in from the top makes sense. ill be doing that.
Another fantastic tutorial.
Thank you
Cool trick for applying the epoxy. Have to remember that one
Thank you! Cheers!
Nice work and Sundays are good
Cool, thank you.
Can you do a video of making the internal wire and what wire do you use. That’s if you haven’t done one already
Here are some videos I made on the wire harness...enjoy.
ruclips.net/p/PLEVBv_zywucR1daeR5wwkcZeqU-GomrKd
thanks for all the brilliant tips! they are very usefull
I'm glad to share.
Ive been using Azek (PVC) trim boards. It has a specific gravity right around 0.5 which makes it ideal for gliders and baits that benefit from a higher SG. The trim board has no texture and thus no extra sanding.
The trim board is easy to drill with very little drift when traditional through wiring. Simply draw your center and square it up to the drill press and then finish off with a hand drill. Nearly perfect every time unlike some of the softer woods where drill drift can be a problem.
Ive been priming with epoxy but am going to test a plastic adhesion promotor in a spray can that would be a lot faster.
Good info...thank you
Good upload buddy 👍 interesting information as always, the info on the weighting, density & hook eye placement was really helpful, will be good to see how the new material works in the water, Sunday uploads get a thumbs up too 👍 keep up the good work
Thanks 👍
Just great, I m waiting for the next vid!.!!
Thanks. ..working on the next one right now.
Lately I made some one piece gliding lures. For what I saw in the internet, the weight can be placed on the center of the lure, on two spots(if you divide the lure in two, one weight in each middle part of each side), and more or less all along the botom of the lure.
I would like an explanation if you can, of the phyisics behind each of these 3 configurations and which action will be achieved with each. Regards, great video!!!
You should watch this video I made a while ago...it's a good introduction to weight/balance and hydrodynamic forces.
ruclips.net/video/acqIYMolH6s/видео.html
awesome....beautiful work
Thank you! Cheers!
I hear ya on "the least favorite part"
Glad to see you try out the PVC trim. I've often wondered if it would work and now I know it's probably not the best medium, especially if you're planning to do any detail carving.
New subscriber, post when it works for you. I'll be there any day.. Unless they're biting! Thanks nice video.
Thank you
👍👍👍
Hey there, I just know you as engineer, don’t know your name but I see you are in Florida
I make lures my self and live in Florida myself
I learn a lot from you, thanks for all the good tips
Jesse
Most of my buddies call my Franco....I live north Florida.
@@EngineeredAngler hello Franco, I want to ask you what kind of epoxy you use to make hard body crank baits?.....I see yours have a white finish before you paint them. thanks.....Jesse
How did you manage to make that perfect harness, with all the hairpin turns, to fit perfect in the lure? That’s incredible work dude!! It’s great to see your home made lures and videos on any given day. 👊
I made it in a hurry with that titanium wire and was super revealed when it actually fit...Thanks bro.
The gliders (jerk baits) using AZEK trim board can be simply shaped with a router and round-over bit.
What brand PVC trim board are you using? I want to try the lower SG board you featured for surface lures.
I'm going to try using the AZEK glue to join two boards together to obtain a thicker working stock for lathe use.
It is refreshing to visit a lure building site that explains things from a science/engineering perspective.
I'm not sure who makes the PVC...I had it left over from a house project. I've been using PVC plumbing glue to make thicker stock...clamp it overnight.
Watch out for that pvc dust 🏴☠️🏴☠️🏴☠️
Thanks, help me full
Happy to help
I love your idea of the wire through the top. It makes for a much stronger section when the fish is pulling on the bottom hook. Just a thought, and I don't know if you've ever tried it, but, what about a straight wire with a heavy 80 or so lb swivel through the hole and the straight wire going through it. My thought is that it would aid in preventing a fish from throwing the lure off. Thoughts?
That's actually a configuration that I have seen on really big heavy lures, for tuna and GT's, its strong. I never thought about it keeping the fish from throwing the hook...but I think you're right. Anything that "softens" the connection between the hook and the lure mass will help.
Thank you...good question.
Where do you get your wire for a Thru wire and what gauge? and where do you get your lexan polycarbonate and what thickness?
I use a few different wire diameters but mostly I use .035 inch stainless. I always dig through the Internet for the best price, so my source changes.
I buy my plastic bibs pre-made from lure parts online.
Thanks for watching.
Posting on Sundays is fine. Working from home to make a living is time consuming as we all are putting more than 8 hrs a day. Like that you are trying different common materials.
I totally know what you're saying I'v been working from home, running an engineering office...the phone calls never stop. Thank you so much for spending some of your precocious time watching my videos, cheers.
How do you determine what the minimum weight on the lure to ensure that the lure will turn right side up once it hits the water?
The key is a buoyant lure weighted low in the body
So I am making/testing a typical swim bait lure where the cross section that is basically oval shape. The lure suppose to float. Rather than at 90 at the upright position, it floats at a slight tilt . Say about 15 deg to one side.
So the center of buoyancy is off from the center of gravity of the lure, where the center of gravity should be along the centerline of the vertical oval.
To correct: I need to add weight on the opposite side to try balance it out. It will likely be a trial and error. Also I will need to avoid adding weight, in an amount exceeding the overall lure density of 1 g/cm3 w some margin to avoid having it not float anymore. Does that make sense?
funny i was working with the same pvc today (actually making a mount for my spray chrome air manifold) and was think that i might work for lures..
Give it a shot.
Where can I buy lure blanks (bulk) with top eye - thank you !
Sorry, I don't know...I make my own.
When you were weighing your pay for the hardware and how much lead you had to put into it you kind of lost me towards the end there were he picked up that little block had something to do with it I don’t totally understand I was following you to that point could you explain it again for me thank you
how about I do a thorough explanation in a Q&A video...I get quite a few questions like this.
Very interesting, could you go into more detail on how you calculate the density and buoyancy of different materials. I did come across something once on density of different timber but would it be too much to ask ? for something downloadable, just for future reference as it would take a lot of guess work of the equation. 👍👍👍👍👍
Great suggestion!
that would be a fantastic video on how you do your calculations ...
How do you build a bait to suspend?
I'll do a video soon.
What drill is used to pierce the eyes?
It is called a forstner bit.
@@EngineeredAngler thanks...
what hour epoxy are you using?, cant find online
In the description...I went in and added a link in case anyone else wants it.
Thank you for watching.
Great video as always!!! thank you for sharing. Instead of using epoxy to fill the groove can you use baking soda and superglue? is it a good method? I ask because im in the process of making bigger stickbaits with thicker wire and the amount of epoxy needed would be costly on multiple pieces.
I make a lot of lures and use baking soda and super glue for sealing throughwire slots and I’ve never had any issues with it coming out. Just make sure you use a really thin super glue so it seeps down into the baking soda. Thick super glue will only make a skin on the top.
The baking soda/super glue trick is excellent, I learned it back when I was making model boats... 40 years ago... and it's still an excellent trick. The limitation for this application is that it's hard to be sure that you have filled a cavity or drilled out hole. The baking soda acts as an accelerator to the CA glue since it is alkaline, has a high PH. This means that even really thin glue can create a cap and not penetrate. So for this lure I wanted to use epoxy so that I could be sure the entire cavity was filled and the wire is fully encapsulated.
EA is right about the capping. If I need to fill a deeper area I build it up in layers. However in this situation the epoxy would be much more precise