Thank you brother! Yeah it's crazy, I touched the thing with my bare hand ✋️ and it actually hurt lol I think the USB fan on the lowest setting on top is giving me the best results so far
Yea i was dragging my feet on the RXD miner … got my AL0 over clocked to about 500gh tho … and didnt wait too long on ordering the AL 2 Lite … if your not first batch your last 😂😂😂
💯👍 + 💯👌 .. for detailed still simple and short technically perfect video with future statistics... which helps both... those already got the miner RX0 and those are planning to purchase one🎈🎈
@aShotByFred even though I'm not a big fan of TradeOgre after what happened with Kaspa you can use TradeOgre to buy and sell Radiant. Just make sure you never keep a dime on that exchange for longer than you have to. Get funds off of there IMMEDIATELY if you use them
got mine delivered yesterday..been trying to find the sweet spot temp wise..seems to like to run a lil hotter than ks0 ultras..ultras seem to perform best around 77/78 and 60/61...rxo seems to run best around 87 and 68 definitely buying another one when they have another batch to sell
@aShotByFred you can use discount code GREATERGOOD and get 10% off a Tangem wallet redirect.sale/tangem/?promocode=GREATERGOOD That's what I use to store my Radiant
Really interested in the long term results, you should also try and get number of RXD you'd have got if you just bought the coin when you bought the machine. Enjoy the content #tangem
What a great deal! Im close to 2k for 2 RXO's shipped to my door 😢(today hopefully) First Asic purchase i will definitely be holding! Great overview! #Tangem, Folks wish me luck i feel it was a terrible investment, but i like to gamble 😂
@@GreaterGoodMining same mate :D I didn't have enough Etherent ports so I used my old router as Wifi repeater, sometimes old stuff comes in handy! Love your Content BTW!
@EmilChristensenHeaton I know what you mean, I hold on to stuff forever. It always ends up being useful again at some point lol Thanks for watching I appreciate it!
Hi, I have the Kaspa pro and ultra miners running pbfarmers firmware but as I suspect with this Rx0 miner, they will never ROI. Cute little devices though! #Tangem
I really hope that we all are pleasantly surprised when the bull run starts ripping. Crypto can be really tough to be involved in because it can be so volatile. I'm trying to be patient with a timeframe of years not months etc. I appreciate you watching and I hope that those Pro's and Ultras become worth it sooner rather than later for you!
I almost purchased one of these on day 1 but I got cold feet. I really hope these work out well for everyone so I can put a little more trust in Ice River not to always pull the rug straight away. Do you keep most of your crypto on your tangem wallet or does it depend on the coin? #Tangem
I feel ya. There have been so many miners being released across the board. It's hard to keep up and a bit nerve wracking because the hashrate on these projects keep going up exponentially. It's hard to know what'd worth the risk. If Tangem supports a crypto that I hold I definitely put it on Tangem. Tangem doesn't have native support for all the crypto I hold and that's the only time I use a different wallet
@GreaterGoodMining I've been looking for my first home miner for months now and every miner I've decided not to buy has ended up being a good decision so far. The KS2 lite and AL2 lite have caught my eye but neither are a jump in efficiency, just a lower cost per hash. If I order now and wait 3 weeks+ for delivery, my concern is there will be an AL2/KS2 lite Ultra model with double the efficiency that will be a better buy. I know I've just got to bite the bullet and jump in eventually, but I'd be so upset now if I'd paid $500+ for this RX0 or just paid $800+ for an AL0 or $400+ for a KS0. Not to mention if Goldshell had got any of my money.
God bro Congratulations, I have the same one, in my case it cost a lot more, approximately 550 USD, with taxes and so on, but I hope things are favorable for all those who have one, Greetings from Peru. I want a card :3 #Tangem
Whoa, yeah that's a bit higher than what I paid. I ordered directly from Iceriver.io ans used my discount code. I'm hoping we all do well with these miners and I'm hoping for a bull run soon!
I bought this with my own money from a private account. Iceriver had no clue that I bought it. Tons of people in my Discord have already received their RX0's. It has nothing to do with me having a RUclips channel
@kellym2232 but they had nothing to do with me ordering this. I didn't receive it from them for a review. I ordered mine within hours of them becoming available for sale. RUclipsrs are constantly watching to order stuff as soon as it becomes available because if you don't get your miners first and you dont get your videos out in a timely fashion they become irrelevant, and no one watches. If I took several days to decide I would've been out in line just like everyone else
Yeah it is disappointing that the profitability drops so hard on some of these ASIC'S so fast. I just keep stacking though and waiting for the bull run
if someone cant says anything nice about your videos give em the boot you risk your miners for us all the time with overclock testing you cant be any nicer #Tangem
Good luck on this thing, my rx0 showed up yesterday. Testing it on solo 💀. #tangem
Nice, I'm curious how it'll do solo. Let me know if you hit any blocks 👍
YO!!! TechManTY, you won the Tangem wallet :) DM me on Twitter or in my discord! Congrats bro!
Cool man!!! I will be hitting you up soon. Hello from Las Vegas!!!
wooooo 73 degress! i cant get over how hot they like to run. great video!
Thank you brother! Yeah it's crazy, I touched the thing with my bare hand ✋️ and it actually hurt lol I think the USB fan on the lowest setting on top is giving me the best results so far
What do you think of the new Iceriver RX0?
Got my 3 today as well!
Got mine a few weeks ago, instantly regretted it
@@thecanadianpunk-miner4life nice!
@@SZ_DARKK im sorry to hear that. Hopefully it'll be worth it down the line
Appreciate your perspective on the new RX0 release, and like how you use the thermal Pred cam in your vids. Keep up the hard work. #Tangem
Thank you I appreciate it!
Thanks for the video as always keep being you
Thanks JokerMiner! 😀 I always love getting a new miner. It's like Christmas Day for me lol
Yea i was dragging my feet on the RXD miner … got my AL0 over clocked to about 500gh tho … and didnt wait too long on ordering the AL 2 Lite … if your not first batch your last 😂😂😂
Lol a wise man named Ricky Bobby once said "If you're not first your last!" And I've based my whole life on that! 😆 🤣
💯👍 + 💯👌 .. for detailed still simple and short technically perfect video with future statistics... which helps both... those already got the miner RX0 and those are planning to purchase one🎈🎈
Thank you I appreciate that! 😀 Glad you liked the video 👍
Got my RX0 up and running as well. Keep the great content coming!! #tangem
Thanks for watching 👀
What exchange do you use
I am just hodling right now
@@roycesadventures but you will still need a exchange
@aShotByFred even though I'm not a big fan of TradeOgre after what happened with Kaspa you can use TradeOgre to buy and sell Radiant. Just make sure you never keep a dime on that exchange for longer than you have to. Get funds off of there IMMEDIATELY if you use them
got mine delivered yesterday..been trying to find the sweet spot temp wise..seems to like to run a lil hotter than ks0 ultras..ultras seem to perform best around 77/78 and 60/61...rxo seems to run best around 87 and 68
definitely buying another one when they have another batch to sell
@fredocuomo5386 I think mine likes to be in the low 70's. I'm getting about 270gh so far at that temp range
@GreaterGoodMining it also likes being around 69 and 57...its an interesting chipset for sure
I have the RX0 running at 49 temp 1, and 41 Temp 2
I don't know if it's bad
@erudito8377 whats your hashrate..anything above 260 gh/s is technically good..mine is running at 68 and 56 @ 303.17 gh/s
@@fredocuomo5386 between 50 and 41 I have 268 or 270 gsh... did you use any overclock for the machine?
What exchange wallet do you use or what's the options for radiant ?
@aShotByFred you can use discount code GREATERGOOD and get 10% off a Tangem wallet
redirect.sale/tangem/?promocode=GREATERGOOD
That's what I use to store my Radiant
Thanks for the great run through #Tangem
Thank you for watching!
Your wife hollering at you in the beginning was my favorite part. The future is radiant! #tangem
Lol that's our favorite part too 🤣
Really interested in the long term results, you should also try and get number of RXD you'd have got if you just bought the coin when you bought the machine. Enjoy the content #tangem
That's a good point I'll do that. It all depends on when I decide to cash out
Thanks for the video I was unaware that RXD was on Tangem. Thank you.#TANGEM
Yeah I'm glad Radiant is on Tangem. Makes it so much easier to store!
Mine is coming tomorrow, Let's GOOO #Tangem .
@@domg6614 noice! Time to mine somE RXD 💪
Just got mine in last night and got it running. Can’t wait to see how it fares #Tangem
Nice! Yeah I'm curious how this will all play out
What exchange do you recommend
I use Uphold and Trade Ogre but be careful with TradeOgre. They have been screwing around with people's Kaspa. Don't buy Kaspa on TradeOgre
Nice Video Man 👌🏻🔥. Btw that door will break soon!!! Lol #TANGEM
Lol yeah this door has taken some abuse!
Great video! #tangem
Thanks for watching 👀 Good luck with the giveaway!
Great video! I hope the RX0 will stay profitable for longer, just got mine setup yesterday, first batch! #tangem
Thanks for watching! Me too, I'm hoping that the RX0 is worth it it the long run!
What a great deal! Im close to 2k for 2 RXO's shipped to my door 😢(today hopefully) First Asic purchase i will definitely be holding! Great overview! #Tangem, Folks wish me luck i feel it was a terrible investment, but i like to gamble 😂
Ouch, that's pretty pricey for two RXO's!
Is WIFI connection an option or only Ethernet?? 🤞
Only ethernet
you can use wifii repeater and put it near your devices and connect to it an etherent cable.
@@EmilChristensenHeaton That's what I do. I have a mesh system and it works out great
@@GreaterGoodMining same mate :D I didn't have enough Etherent ports so I used my old router as Wifi repeater, sometimes old stuff comes in handy!
Love your Content BTW!
@EmilChristensenHeaton I know what you mean, I hold on to stuff forever. It always ends up being useful again at some point lol Thanks for watching I appreciate it!
Great video! #Tangem
Thank you!
i want to get a rx0 but with what happened with AL0, i am expecting now a potential RX Lite model, and will give some time maybe to get that #tangem
Yeah I have a feeling you're right. Not sure when but it'll eventually happen
Great video, thanks for the insight! #tangem
Thanks for watching. I appreciate it!
Well… if I could wait for it b4 traveling I would order one. #Tangem
I just got back into town after the Hurricaine Helene and this was waiting for me when I got home! Glad it didn't arrive before i left lol
Great content. Keep it up #tangem
Thanks for watching 👀
Hi, I have the Kaspa pro and ultra miners running pbfarmers firmware but as I suspect with this Rx0 miner, they will never ROI. Cute little devices though! #Tangem
I really hope that we all are pleasantly surprised when the bull run starts ripping. Crypto can be really tough to be involved in because it can be so volatile. I'm trying to be patient with a timeframe of years not months etc. I appreciate you watching and I hope that those Pro's and Ultras become worth it sooner rather than later for you!
I almost purchased one of these on day 1 but I got cold feet. I really hope these work out well for everyone so I can put a little more trust in Ice River not to always pull the rug straight away.
Do you keep most of your crypto on your tangem wallet or does it depend on the coin? #Tangem
I feel ya. There have been so many miners being released across the board. It's hard to keep up and a bit nerve wracking because the hashrate on these projects keep going up exponentially. It's hard to know what'd worth the risk.
If Tangem supports a crypto that I hold I definitely put it on Tangem. Tangem doesn't have native support for all the crypto I hold and that's the only time I use a different wallet
@GreaterGoodMining I've been looking for my first home miner for months now and every miner I've decided not to buy has ended up being a good decision so far. The KS2 lite and AL2 lite have caught my eye but neither are a jump in efficiency, just a lower cost per hash. If I order now and wait 3 weeks+ for delivery, my concern is there will be an AL2/KS2 lite Ultra model with double the efficiency that will be a better buy. I know I've just got to bite the bullet and jump in eventually, but I'd be so upset now if I'd paid $500+ for this RX0 or just paid $800+ for an AL0 or $400+ for a KS0. Not to mention if Goldshell had got any of my money.
God bro Congratulations, I have the same one, in my case it cost a lot more, approximately 550 USD, with taxes and so on, but I hope things are favorable for all those who have one, Greetings from Peru.
I want a card :3 #Tangem
Whoa, yeah that's a bit higher than what I paid. I ordered directly from Iceriver.io ans used my discount code. I'm hoping we all do well with these miners and I'm hoping for a bull run soon!
@@GreaterGoodMining Me too friend, but I'm further away, shipping is more expensive, and I paid about 110 dollars in taxes
Excellent review, thanks for sharing!!! Best crypto RUclipsr!!! #Tangem
@jbroshar87 thanks for watching. I appreciate the kind words 🙏
I guess I need to start a youtube channel so I can get my equipment on time.
I bought this with my own money from a private account. Iceriver had no clue that I bought it. Tons of people in my Discord have already received their RX0's. It has nothing to do with me having a RUclips channel
@@GreaterGoodMining so did I. I still don’t have tracking.
I’m saying RUclipsrs always get their miners first.
@kellym2232 but they had nothing to do with me ordering this. I didn't receive it from them for a review. I ordered mine within hours of them becoming available for sale. RUclipsrs are constantly watching to order stuff as soon as it becomes available because if you don't get your miners first and you dont get your videos out in a timely fashion they become irrelevant, and no one watches. If I took several days to decide I would've been out in line just like everyone else
A bit sad imo.
Yeah it is disappointing that the profitability drops so hard on some of these ASIC'S so fast. I just keep stacking though and waiting for the bull run
if someone cant says anything nice about your videos give em the boot you risk your miners for us all the time with overclock testing you cant be any nicer #Tangem
Thank you so much, I really appreciate that. I love doing these videos for you guys and I always hope that people like them 😀
@@GreaterGoodMining if they don't screw em that's what I tell hobbyist
🎉🎉🎉 Not for me 😂
Def not for everybody lol I always appreciate you commenting anyway sir!!
Typical- run hot more profit
They like that heat! 🔥 🔥 🔥
Hello. Getting crypto stuff within my country is very hard and getting on another country the tax are crazy high. #TANGEM
That's a bummer. I feel like a lot of governments don't want to allow crypto for various freedom crushing reasons
Great video, very informative. #tangem
Thank you I appreciate it!