Great tutorial. Have been wanting to make a grime for ages. How do you know the length of the elastic to insert. I love all your tutorial, thank you. Lynn
Thank you for this I thoroughly enjoy watching your videos and your explanations. So very clear and easy to understand. Best of all your an aussie so a welcome voice to an ex aussie all the way in the UK. X
What a great idea. Recently discovered your channel. Nice to hear an Ozzie. Can you please advise who you purchase your labels from. Cheers Dianne Qld Aust.
Hi Dianne, and welcome to the channel...so glad you are here :) and a fellow Aussie too :) I got my labels from Aliexpress www.aliexpress.com/item/32335475364.html?spm=a2g0s.9042311.0.0.27424c4dKOuEx4
I have a question on your formula for a hoop, you said to follow the above formula after you subtract the 2". The above formula says to multiply by 2 but you multiply by 4, which is correct? Thank you love your video
I have done a Grime Guard for my Hoop. But when I put in on, I don't see a lot my work because Grime Guard take a lot of place in aere. If I make it less large it doesn't take all my fabric. Is it normal ?
Hi Nicole, I think someone has put an unwelcome add in your comments! Hope your able to remove it ok! Great tutorial I’ll give it a try I’ve just come back to cross stitch after a 15 year break! Do you have a tip on how much elastic to use, is there a formula?, ok sorry Nicole I just found it in the drop down box your fantastic!
Welcime back to cross stitch...l am glad you found everything you need and enjoyed the tutorial ❤😊also thank you for bringing that comment to my attention...l have removed it...if you see these you can report them 😊 thank you for helping me keep this community a safe space ...till next time happy stitching 🪡🧵❤
Formula doesn’t actually work properly without fudging. For an 8 inch hoop the formula should be 8” x pi (π) = X then X + 2 8” x 3.14 = 25” + 2 “ = 27”. Also using 6.5” for the width is not “always”. Hoops are not as bulky and wide as QSnaps so reducing the width makes it more logical even if you have lots of fabric to tuck in. Ps, to make it more professional and neater looking use a width of 1.5” for joining seam then use zig zag for each end as this will be visible upon finish. Roll and press approx 1/8 inch then fold slightly larger than elastic. Reduces how bulky the seams become.
THANK YOU for putting the instructions in the text too! Can't wait to make one
We’ll now, that was easy! I’ve just made my first grime guard following your tutorial and I couldn’t be more pleased. Thank you, Nicole!
Thank you for doing a grim guard, now to get my bumm busy making them for my different Q snaps. Another great tutorial.
Glad you enjoyed it...and you are very welcome. Thank you, for taking the time to watch ❤ happy sewing
@@darvanaleedesignsstudio your very welcome, i watch both your channels and enjoy them.
Great vid one grimeguard almost completed thanks!!!!
Love your multi-craft channel and all the different How To's you bring us.
Aww thank you Biz. Thank you, for your continued support and encouragement ❤ l appreciate you taking the time to watch 😊❤
@@darvanaleedesignsstudio That is my highlight of every video.Getting to hear your voice. It is like a friend is over for tea.
@@bizburgess1947 awww thwnk you ❤❤❤
Thank you!!!! Made my first one tonight in only just over an hour. Awesome video and explanation!
Glad it helped!
Such a good tutorial as always. Will be making a couple this weekend. Along with project bags!! Thankyou 🌈
You’re welcome 😊 thank you for watching and have a wonderfully crafty day 🧵🪡🤗
Thanks, needed this. You are so funny😂
thank you :) I am glad I gave you a giggle :)
Made one after reviewing your video a couple of times. It was great! Made a few adjustments for my ability to sew.
Glad it helped!
Great tutorial. Have been wanting to make a grime for ages. How do you know the length of the elastic to insert. I love all your tutorial, thank you. Lynn
Another very good video Nicole - thank you so much 🥰💐
You are very welcome, glad you enjoyed the video😊 thank you for taking the time to watch and comment...till next time happy stitching 🪡🧵❤
Great tutorial as always Nicole, thank you!
Thanks hun, thank you for stopping by to watch ❤🧵🪡
Great tutorial thank you for sharing very helpful. Have a wonderful week😊💗🧵🪡🤗
Thank you, Theresa, l appreciate your support and encouragement. I am glad you enjoyed the video. ❤ till next time happy sewing 😊❤
Thank you for this I thoroughly enjoy watching your videos and your explanations. So very clear and easy to understand. Best of all your an aussie so a welcome voice to an ex aussie all the way in the UK. X
Thank you, Elayna, l appreciate you taking the time to watch l am gald you enjoyed the video...stay safe in the UK and happy sewing ❤
Great tutorial as always x Love the close ups!
thanks lovely, thank you for taking the time to watch :) till next time happy stitching
Great idea! I haven't done cross-stitch in around 10 years, but when I take it up again, I will make sure to make some of these.
Thank you for taking the time to watch and comment on this video 🪡🧵❤
😊
Thank you for the information, but I have a question. What if you have a lot of fabric like 57" by 42" how wide would you make the strip
Where do you purchase your design labels, D?
What a great idea. Recently discovered your channel. Nice to hear an Ozzie. Can you please advise who you purchase your labels from. Cheers Dianne Qld Aust.
Hi Dianne, and welcome to the channel...so glad you are here :) and a fellow Aussie too :) I got my labels from Aliexpress
www.aliexpress.com/item/32335475364.html?spm=a2g0s.9042311.0.0.27424c4dKOuEx4
I have a question on your formula for a hoop, you said to follow the above formula after you subtract the 2". The above formula says to multiply by 2 but you multiply by 4, which is correct? Thank you love your video
I have done a Grime Guard for my Hoop. But when I put in on, I don't see a lot my work because Grime Guard take a lot of place in aere. If I make it less large it doesn't take all my fabric. Is it normal ?
Would like to know the ‘length’ of the elastic you used. I want to do one for my QSnap-same size! Thanks.
The formula is under this video for you 😊
What is a grime guard used for?
Do you have a tutorial on how to make 10 in round grime guard for round hoops
No sorry I don't, but I do talk about how to work it how in this video :)
@@darvanaleedesignsstudio ok thankyou
Hi Nicole, I think someone has put an unwelcome add in your comments! Hope your able to remove it ok! Great tutorial I’ll give it a try I’ve just come back to cross stitch after a 15 year break! Do you have a tip on how much elastic to use, is there a formula?, ok sorry Nicole I just found it in the drop down box your fantastic!
Welcime back to cross stitch...l am glad you found everything you need and enjoyed the tutorial ❤😊also thank you for bringing that comment to my attention...l have removed it...if you see these you can report them 😊 thank you for helping me keep this community a safe space ...till next time happy stitching 🪡🧵❤
Formula doesn’t actually work properly without fudging. For an 8 inch hoop the formula should be 8” x pi (π) = X then X + 2
8” x 3.14 = 25” + 2 “ = 27”. Also using 6.5” for the width is not “always”. Hoops are not as bulky and wide as QSnaps so reducing the width makes it more logical even if you have lots of fabric to tuck in. Ps, to make it more professional and neater looking use a width of 1.5” for joining seam then use zig zag for each end as this will be visible upon finish. Roll and press approx 1/8 inch then fold slightly larger than elastic. Reduces how bulky the seams become.