Love the N/A stuff. Us old guys can remember when if you made one horsepower per cubic inch, you had a bad ass engine. Now these LT, LS, and Coyotes are making 1.25-1.60 per cubic inch N/A, just amazing.
No doubt! And for most people wanting a nice weekend cruiser, this package is perfect. Great sound with great reliability with the power it’s making. Will not strain the drivetrain.
@@LateModelRacecraft I'm looking to replace my old tires. Just curious to what you guys run that you consider the Michelin Pilot SuperSports a bad tire ? Ive found them to have outstanding cornering grip and have had them on my lo ast two cars. The BMW M2 i had and now my C7 . Unless youre referring to straight line performance only? I live in a rural part of Connecticut and drive my stingray pretty hard, but its more twisty roads rather than long straight roads. The pilots arent cheap especially if you like to leave road tattoos !! I do like to do the occasional burnout and grab the shifter ( 7spd ) and bang it into second gear leaving more road tatts instead of peddling it or bouncing off the rev limiter ! So any help or suggestions for a gripy cornering tire you could recommend would be awesome !! Thanks so much !!!
Just love the sound CHOP of the cam… it’s nice when you see people turn around before you get to them because of the CHOP of the cam, and the TINGING sound of the headers/ and motor… … 😎
I do some roadcourse trackdays with my 2017 Grand Sport. Looks like this would be a great option for some more "squirt" off the corners and likely MORE reliable than the factory DOD poo
Love the Lt1 motors. I did higher compression,heads,cam intake manifold and got 560hp.Notice during the engine build and was wandering y you didnt use the stock lt1 orange head gasket set? Car sounds great and run even better. LMR FOR THE WIN!
I live in NH HOW do I get my c7 stingray m7 to you. I would love to do the 60 to 100 hp I have put on a 90mm throttle body and a red light throttle response. What is the turn around time?
We can definitely get you taken care of. We are usually 6-8 weeks out after deposit is given. Then we setup transport and your vehicle will be at the shop for complete build/tune for 1 week turnaround. Feel free to go to our website to fill out an inquiry and 1 of our sales team will get you taken care of. Look forward to building you your dream car!
We would be glad to get you taken care of. We are roughly 6-8 weeks out from day we receive a deposit. And you are looking at a 1 week turnaround for the build/tune. Feel free to go to our website and fill out an inquiry and one of our sales staff will get you taken care of.
@@LateModelRacecraft isn’t there different specs for force induction motors tho? Always heard you can’t run as aggressive as a cam when you have a blower? Could be totally wrong but certainly have heard that
I have an SS 1LE I’m tossing back and forth about either doing a Magnuson or Cam/Headers this year. If I do the C/H would a stage 2 cam work well with a Magnuson later? Also how much is this package? Do you also handle transport?
Yes, we handle everything from car being picked up at your place and dropped off 100% complete and clean. Please go to our website and fill out an inquiry and 1 of our sales staff will get you taken care of.
I have a c6z06 on an oem 19/20 wheel setup with factory size 285/30/19 and 335/25/20 tires, what size on the Toyo r888r tires will the car accept without throwing off the wheel speed sensors and or abs system since they don’t make them in oem sizes?
What would something like this cost with labor and parts approximately? I’m thinking of getting a C7 from corvette warehouse. I could have them ship it to you ,then when you got done, you could ship it to me in VT 05478.
Cam package is not too bad, the labor is where most of the cost comes in and well as the headers for this particular package. These engines do not have gaskets like the old Ls. So just time cleaning front cover, rear cover, oil pan etc etc is very time consuming. Then of course complete removal and reinstallation of cylinder heads, degree can shaft, install oil pump etc etc.
For the C7 Z06 we would recommend our 800hp package for you. Feel free to go to our website to fill out an inquiry and 1 of our sales staff will get you taken care of.
Yes, this cam shaft will also work with a centrifugal supercharger later down the road. Go to our website to fill out an inquiry for pricing and 1 of our sales staff will get you taken care of.
Love the N/A stuff. Us old guys can remember when if you made one horsepower per cubic inch, you had a bad ass engine. Now these LT, LS, and Coyotes are making 1.25-1.60 per cubic inch N/A, just amazing.
No doubt! And for most people wanting a nice weekend cruiser, this package is perfect. Great sound with great reliability with the power it’s making. Will not strain the drivetrain.
@@LateModelRacecraft yes for sure, And these cars are fun and fast.
@@LateModelRacecraft I'm looking to replace my old tires. Just curious to what you guys run that you consider the Michelin Pilot SuperSports a bad tire ? Ive found them to have outstanding cornering grip and have had them on my lo ast two cars. The BMW M2 i had and now my C7 . Unless youre referring to straight line performance only? I live in a rural part of Connecticut and drive my stingray pretty hard, but its more twisty roads rather than long straight roads. The pilots arent cheap especially if you like to leave road tattoos !! I do like to do the occasional burnout and grab the shifter ( 7spd ) and bang it into second gear leaving more road tatts instead of peddling it or bouncing off the rev limiter ! So any help or suggestions for a gripy cornering tire you could recommend would be awesome !! Thanks so much !!!
Just love the sound CHOP of the cam… it’s nice when you see people turn around before you get to them because of the CHOP of the cam, and the TINGING sound of the headers/ and motor… … 😎
5:02 bro im crying 😭🤣🤣🤣 that was so unexpected … also really great package love it 👌
😂😂😂
Been bouncing back and forth on what I want to do with my GS.
Decided on keeping it normally aspirated.
This just solidified my decision.
Let us know if we can help. Would love to build it for you!
@@LateModelRacecraftcan you pm me
Car sounds great. That noise when you accelerated from a dig was amazing.
Really enjoy your channel, the way you show how the engine is built makes for a great show. Thx
Thanks for watching!
Nice job, guys. Very sensible build for anyone looking for a little HP and TQ and great reliability.
😎🔥💯👍🏾….i have a 2019 C7 GS …looking to do something like this for sure w/ your shop!!!!😁
We look forward to working with you soon!
More NA 🤘 love yall. I sold my vette to my buddy Nathan. He still brings it to y’all. I’ll bring something soon!!
Thanks! We look forward to it.
I do some roadcourse trackdays with my 2017 Grand Sport. Looks like this would be a great option for some more "squirt" off the corners and likely MORE reliable than the factory DOD poo
Veee8 and NA all the way!
exactly what i need for my 2019 GS
thank you
that idle sounds so good
Need that package sounds great 👍🏾 I have a 16 Lt2 Corvette weekend car
Better videos, everyday.
💪💪👍
Thank you very much
When you mention Toyos I assume you're talking about Proxes,if so which version of those and please give the M.M,ratio and rim diameter
Sounds amazing man
Thanks!
Nothing like a cammed Chevy engine! If he just adds an X pipe it will sound gnarly
I need this set up in my life!!!!
How much does this cost and would it still be reliable for daily driving?
Love the Lt1 motors. I did higher compression,heads,cam intake manifold and got 560hp.Notice during the engine build and was wandering y you didnt use the stock lt1 orange head gasket set? Car sounds great and run even better. LMR FOR THE WIN!
I love this package is there a video of the lvl3 cam sound I might go with that for more power is there a downside to porting the heads for it?
I live in NH HOW do I get my c7 stingray m7 to you. I would love to do the 60 to 100 hp
I have put on a 90mm throttle body and a red light throttle response. What is the turn around time?
We can definitely get you taken care of. We are usually 6-8 weeks out after deposit is given. Then we setup transport and your vehicle will be at the shop for complete build/tune for 1 week turnaround. Feel free to go to our website to fill out an inquiry and 1 of our sales team will get you taken care of. Look forward to building you your dream car!
Just picked up my 19 GS the other day, what does something like this run?
Great video as always! Especially about 5 minutes in LOL
Need this on my C6 GS
I''d love to do this on the 2019 GS I just bought. How long does it take and what is the backlog?
We would be glad to get you taken care of. We are roughly 6-8 weeks out from day we receive a deposit. And you are looking at a 1 week turnaround for the build/tune.
Feel free to go to our website and fill out an inquiry and one of our sales staff will get you taken care of.
Trying to find even on the site a price for this package as well as the next package up! I have a '16 C7 Stingray bone stock. No prices listed?
I just called and was quoted 16 grand! Unbelievable.
@@chrispeppers5027that’s fucking ridiculous. You could get it procharged for the same price
Is the Z06/LT4 Louder cammed than the stingray/LT1 with a cam?
I think it’s the other way around but could be wrong. I have a big cam lt4 and honestly you wouldn’t want it louder lol!
Both are 6.2l pushrod engines. Sound very similar as long as long as headers/catback are the same.
@@LateModelRacecraft isn’t there different specs for force induction motors tho? Always heard you can’t run as aggressive as a cam when you have a blower? Could be totally wrong but certainly have heard that
I have an SS 1LE I’m tossing back and forth about either doing a Magnuson or Cam/Headers this year. If I do the C/H would a stage 2 cam work well with a Magnuson later?
Also how much is this package? Do you also handle transport?
Yes, we handle everything from car being picked up at your place and dropped off 100% complete and clean.
Please go to our website and fill out an inquiry and 1 of our sales staff will get you taken care of.
What size type and brand tire is recommended for this NA system upgrade? Can the stock Z51 rear wheel rims be used? How long does the install take?
You guys offer a N/A package for 6.4/392 Mopar?
What do you consider as good tires that will hook up on the streets better? Thx
You mentioned putting a good tire on it to help the times. What tire would you recommend?
Whats the cost for this set up in a 2016 3lt z51 corvette? I'm interested and just came across your videos. Please just let me know
What is the highest horsepower na lt1 you guys made?
Wondering this same thing! Seen 550 wheel a few times not sure if that’s the limit tho
Right over 550rwhp for our stage 5 heads/cam package.
@colefellner5718 I'm making 650 na to the wheels with an elevation of 5280 on my c7
@@mrdeanmachine1 650 goosepower maybe
@@mrdeanmachine1 that’s so badass!
With this package do you have to change the converter
is this setup good for daily driving and long term usage?
LMR do you guys have anything for us California LT1 owners that would pass our regulation?
What kind of price quote on a 2007 6.0 ls2 engine. And where are you located?
Nice setup!!
Can u still use 92 gas or do u have to use a special gas with this build
I have a c6z06 on an oem 19/20 wheel setup with factory size 285/30/19 and 335/25/20 tires, what size on the Toyo r888r tires will the car accept without throwing off the wheel speed sensors and or abs system since they don’t make them in oem sizes?
325/30/20
It is a little taller than factory size
@@LateModelRacecraft ok that’s what I was thinking, I appreciate you answering this.
Good video and pertained to my C7 situation. Wish you were in DFW.
What does a package like this cost labor and parts ?
I just called and was quoted 16K!!! I was shocked it was so much.
What would something like this cost with labor and parts approximately? I’m thinking of getting a C7 from corvette warehouse. I could have them ship it to you ,then when you got done, you could ship it to me in VT 05478.
This the same guy that does magic trick pranks on TV? Lol
How much is a package like this for the C7?
Are cams expensive to buy and have installed? Just curious the cost of it.
A TSP cam kit is about 900 bucks. No idea on labor cost.
Cam package is not too bad, the labor is where most of the cost comes in and well as the headers for this particular package. These engines do not have gaskets like the old Ls. So just time cleaning front cover, rear cover, oil pan etc etc is very time consuming. Then of course complete removal and reinstallation of cylinder heads, degree can shaft, install oil pump etc etc.
I have a 2018 C7 Z06. Can the NA be done on this and would it be the same horse power gain?
For the C7 Z06 we would recommend our 800hp package for you.
Feel free to go to our website to fill out an inquiry and 1 of our sales staff will get you taken care of.
what does this package cost? and can the same NA cam be later used if a pro charger is added?
Yes, this cam shaft will also work with a centrifugal supercharger later down the road. Go to our website to fill out an inquiry for pricing and 1 of our sales staff will get you taken care of.
How much does the stage 2 package cost?
Me looking at all these Corvette mods living in CA... 😭😢
Why replace the dampener ?
what cams are yall using?
Can you do this package on a C7 with 50k on it or is that too high mileage?
How much for this set up
What's the rough cost of this package??
16 grand!
How much does it cost to do that job with all the parts?
Since nobody was responding, I figured I would call. 16 grand!
How much was all of this
How much is this job
Ballpark, what does something like this cost?
Just called 16 grand!
The heads are out, springs and lifters…. Makes no sense to me not to just go all the way. It’s not that much more $$$
What does a package like that cost?
Just called. 16 grand!
any one in Dubai you recommend a Garage or someone that knows their vette
Are you from Dubai?
@@christopher.grant. yes I am got any ideas ?
Very agressive sales person ! Whoever is the sales person at LMR that dude was not trying to let me talk too anyone else wtf ???
$10k for 60 hp. Lol
Is that what the cost is for the mods in this video?
@@jmarin3177 pretty much.
Diabolical
@@jmarin3177 according to their website, yes.
@@jmarin3177just about
People really falling for this? Lol
You do not need a ATI dampener for a bolt on/cam car 😂 ripped off
Typing behind a keyboard with real world experience! Haha
@@LateModelRacecraft That doesn’t make any sense but whatever you wanna say, buddy. Joke of a shop