MarineAndReef.com: Manually Priming A Fluval Canister Filter
HTML-код
- Опубликовано: 26 авг 2024
- www.marineandre...
Jaron of MarineAndReef.com demonstrates how to manually prime a Fluval Canister Filter when the primer plunger is not working. This same method applies to pretty much all types of canister filters that are not priming because the plunger or the self priming button is not functioning properly.
Now that you have taught me to manually prime my canister filter. My day is going great! Thanks for the lesson. 😊
The most help and also understanding of how it works now. I just made sure the valve was closed as I filled the intake and then opened it and voila! You’re a life saver it’s been days of trying to get it to prime. The primer is essentially useless even though I replaced ut
Ummmm u literally made my night and my giant loaches night! Shoot, you made our whole week and year! I was getting so pissed off tonight. Seriously appreciate you more than you know! A lifesaverrr
Thank you heaps for your vid! Going to try this on my canister filter... I have been having trouble getting all the air out of the canister and it's been a bit noisy ❤
This actually worked 😊 Thank You.
Thank you, broken primer tip saved me tonight
This worked Thank you so much the end part is the one that finally got it to work
I messed up and plugged in my filter too soon. It is now making a lot of noise in the canister. I unplugged it.
Tried all this and still not pumping :(
had to do this today..... yes i got a mouthful
No need to use mouth.Fill the tube with water, then plug in back into the canister. It will start flowing. Unfortunately for me, the canister did not seal properly and it was gushing out the top. I did not moisten the gasket as advised, but the gasket was properly installed (per Petco employee who has three of these units). Frustrated I am running my new setup with an over the tank Marineland filter that is 30 years old. I used a gravel vacuum.
So I will try again before returning.
Very good!👍
Hi do3s anyonr know if the 307 impeller fits the 306
I have this problem with a brand new Fluval 307
Same. Been trying to get it started for an hour now. Never had this problem with any other filter. Brand new out the box.