I just love baleing big square hay bales, the machines just hoover the hay. Run the chamber pressure till ya pop a string then back it off a few psi. Bale cores like concrete that way.
@Frank Froese I do know that, driving a machine like that will only cause problems in the future. Clearly slower would be the answer, or get a higher HP tractor.
Get some proper weight in them bales. Sounds like 350-400kg bales where 600kg makes hard life for the baler but much more efficient on amount of bales to be moved . I don’t know the flywheel setup on the baler which also makes much difference
This hurts to listen to - a 222 PTO/hp JD 4955 might be adequate on this high quantity Krone 4x4 baler at 4mph. But, "speed takes horsepower" at 6mph+ gonna need 300 PTO/hp of an JD 8340R, or more. Diesel engines should run smooth - not variating engine rpm with the baler's plunger.
@@harveybauer4607 Wow go you, i bet you been waiting for that one time when you can use a cool internet word like "Karen" eh, you dont get out much, do you?
looks great and sounds even better. Long term though, its not great for either the engine or the drivetrain having such a large shock load imposed constantly on them. Slowing up a bit will cause less straw to gather in the chamber per stroke of the ram, resulting in a smaller force required each stroke and less stress on the engine and its components
You are correct as the contributors are below. Some people do not get that. I understand it looks good, sounds good but ultimately it's not good for the either bits of kit.
Here the engine died evertime the plunger on the baler has it's stroke, no stroke no bale, big stroke with out properly set up hart attack, buy a Ford set up right, no piston through block, r keen surging along ,while I'm in the next country baling away
@@hanomagfahrer Der Trecker läuft Sauber ! Was am Anfang Wegspritz ist Stroh aus dem Lüfter weil er einen Umkehrlüfter drin hatt.Das auf und ab touren liegt an der Presse weil er an der Leistungsgrenze gefahren wird. Liegt an der Kolbenbewegung der Presse....
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Hit that thumbs up for this amazing baling setup! 👍
Sg2 cabs were the best looking by far
That plunger is taking some horsepower. You can hear every stroke.
Got her full and some pressure on
Yep just another under powered John Deere.
Nothing runs like a Deere, like when you kick it in it's ass.
If it ain't red get it out of the shed.
I just love baleing big square hay bales, the machines just hoover the hay. Run the chamber pressure till ya pop a string then back it off a few psi. Bale cores like concrete that way.
That may sound good but I'm not sure what that does to the engine surging like that constantly
Agree,and doesn t sound good,a lower gear?,wouldn t do it with my tractor!!!
@@claesmansson9070 .......a lower gear or even slower.
@Frank Froese I do know that, driving a machine like that will only cause problems in the future. Clearly slower would be the answer, or get a higher HP tractor.
Get some proper weight in them bales.
Sounds like 350-400kg bales where 600kg makes hard life for the baler but much more efficient on amount of bales to be moved .
I don’t know the flywheel setup on the baler which also makes much difference
Going a little too fast'! Loose the splitter,🤔
Can't argue that the baler doesn't have capacity
Whats the size and weight of those bales?
120 x 120 cm
@@jensolsen7694 English please
4x4 500kg
+
Power und Leistung hat der Karre💪👍
Thanks for NOT showing the three bails being UNloaded ....I know the head lights and fat tires was more .
That krone is making her puff!😲
This hurts to listen to - a 222 PTO/hp JD 4955 might be adequate on this high quantity Krone 4x4 baler at 4mph. But, "speed takes horsepower" at 6mph+ gonna need 300 PTO/hp of an JD 8340R, or more. Diesel engines should run smooth - not variating engine rpm with the baler's plunger.
Yep, drop it a gear, and save long term issues.
You've obviously never owned such machinery, you are talking utter rubbish
@@casefarmgirl2279 Apparently, my rubbish talk is over your head, Karen
@@harveybauer4607 Wow go you, i bet you been waiting for that one time when you can use a cool internet word like "Karen" eh, you dont get out much, do you?
@@casefarmgirl2279 he’s right though? Why would you have this running to this point when you don’t have to? Knock it back a few mph
Underpowered or too fast?
Both
Both
ABSOLUT THE KING
No doubt it surging like that is hard on shit, going to fast for the hp, working it to hard. But some don't know any better.
Baler too big, speed too high. Greetings from germany
Spot on. There would not be a problem if he went a little slower. I hope he was showing off for the cameras, otherwise he will have troubles ahead.
Very nice motor sound,interesting video.
Super 💪🚜🎶
If we had a Tractor that sounded like that it would be at the dealership the next day and or somebody would owning it one it next week.
The Governor is surging on plunger strikes inside the baler. It’s running just fine.
Den fehlen ein paar PS
looks great and sounds even better.
Long term though, its not great for either the engine or the drivetrain having such a large shock load imposed constantly on them. Slowing up a bit will cause less straw to gather in the chamber per stroke of the ram, resulting in a smaller force required each stroke and less stress on the engine and its components
I have pulled what's left apart to try and salvage, and that wasn't much, even 20years ago when they said they were built for anything
You are correct as the contributors are below. Some people do not get that. I understand it looks good, sounds good but ultimately it's not good for the either bits of kit.
Двигуну нічого не буде, що він так ривками працює???
When Deere Built Tractors not made them
Beautiful machine. I’d say she’d drink a nice fill of diesel 😆
Nice 🤔 now just think if that was straight piped wot a soundtrack 😂👍
a straight pipe would make it sound worse
@@ford8630power agreed
Très belle vidéo
J’adore bel ensemble 😍😍👍👍
Guessing she's juiced up a bit, though it seems not right and annoying
Einfach nur cool. Wie der grunzt bei jedem kolbenstoss.🤤🤤😎😎😎😎😎. Das is eben noch Maschine
I wouldn't call pure sound on a first place. Maybe reduce a speed a bit.
Just listen to the great Green slug cough ,every time the chop comes on, ha
💛 Hello
🚜
👍
🚜
Very Nice Thanks
Who needs music?
Super maszyna ❤️
Here the engine died evertime the plunger on the baler has it's stroke, no stroke no bale, big stroke with out properly set up hart attack, buy a Ford set up right, no piston through block, r keen surging along ,while I'm in the next country baling away
Best combo 👍
Great Video
As an engine lover I could not listen to the laboring sound all day - something or many things are askew - horrible
Fucking mint 👌👌👌
Tractors are getting to Big !,
Av av av
Iooks oķ but wouldn't pull u out of bed, and an extra fuel pod,maby get boser at every headland ha
👍👍
Za słaby ten koń.
Ein scheiß
Der Trecker läuft echt sch...ße, gleich zum Anfang spritzt irgenteine Flüssigkeit weg, naja schade um den Trecker
@@hanomagfahrer Der Trecker läuft Sauber ! Was am Anfang Wegspritz ist Stroh aus dem Lüfter weil er einen Umkehrlüfter drin hatt.Das auf und ab touren liegt an der Presse weil er an der Leistungsgrenze gefahren wird. Liegt an der Kolbenbewegung der Presse....
@@pornoluecke genau so schauts aus, schöner wäre es natürlich wenn ein großer eicher an der Presse hängen würde 😀
@@christianhuber9667 gibt's einen der es schaffen würde?
@@pornoluecke 3125,3133,3145. Hab ich alle schon vor der fast gleichen Presse gefahren