I’m about to attempt this. When you lifted the frame off the fork, I noticed you put your finger inside the frame. Is that to prevent the bearing ring and other stuff inside from falling out? It looks like the adapter will be the bottom most item in the lower headset and not between anything else. Sorry for the questions but I’m new to mountain biking and would like to change out the stock coil fork my bike has.
Are you sure that isnt gonna fall apart ? It looks like there is a lot of empty space there and it doesn’t fit snugly. Also isnt there bearings that go on the bottom. Just asking because I have not seen many videos on this exactly and I’m thinking if doing it to my bike. Thank you.
Jeah looks like there is no bottom headset and even if there’s one, was it an integrated one or just a bearing and where does it sit on the adapter? Questions over questions
I have a tapered frame but not a big budget for a fork. I am looking at the Suntour Epixon but most sellers dont have it tapered. I found one on ebay that is tapered but only 100mm and i think im just going to adjust the travel of it to 120mm. These adapters are confusing. I dont want to get into that. 😬😑
Ang galing! Super nawala ung kaba ko sa clip nyo sir. Nagbubuo kse ako ng mtb ngayn. Sa sobrang excited ko sa mga part at pra mabuo ko na. Ndi ko naisip na kelangan pag taperred frame dapat tapered din ang fork. Nabili ko na bago ko nlaman na ndi pla sila swak. Question sir, iba2 ba ang sizes ng adapter o standard na sya?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Isn't there a bearing missing at the bottom of headtube that should sit on top the adapter and rest on a race inside the headtube?
I’m about to attempt this. When you lifted the frame off the fork, I noticed you put your finger inside the frame. Is that to prevent the bearing ring and other stuff inside from falling out? It looks like the adapter will be the bottom most item in the lower headset and not between anything else. Sorry for the questions but I’m new to mountain biking and would like to change out the stock coil fork my bike has.
where do i even buy the part
WHAT IS THE NAME OF THE PART AND WHERE TO GET IT.
Wondering the exact same thing
You can find it on aliexpress my friend
It is called a Crown Race Reducer for a 1.5 "to 1.125" (1 1/8) conversion. Good video on install.
I have just ordered one of these. I would love to hear how yours is going or anyone else's who has tryed this 👍
Link of the item?
Can you suggest me the bottom cup size for my upland leader 300 29er 2019?
What is the adapter called? I need to buy urgent
Thank you so much, This video is so helpful ☺️☺️
May God Bless You.
Where get it from
Idol bagay po ba sa cube taperd yung rigit weapon blade
No issues?
Kaylangan paren po nyan bumili ng bagong headset or hindi na
Maglalagay parin ba ng crown race kung gumamit ka ng steerer tube conversion adapter?
What adapter is it... ya have a link?
what do you call that adapter?
Crown race reducer.
Sir, what is the size of your headtube?44-56mm?
Wala po alog yung fork niyo or slight play with the adapter?
hi kuya tanong ko lang . yung bearing sa ilalim pang tapered po sized 11/2 or yung standard na 1 1/8 po ???
Kahit hindi po ba sealed bearing pwede?
Oh, that simple, nice!
Pwede din bang gawin sa fixie to? Integrated fork to tapered frame
Are you sure that isnt gonna fall apart ? It looks like there is a lot of empty space there and it doesn’t fit snugly. Also isnt there bearings that go on the bottom.
Just asking because I have not seen many videos on this exactly and I’m thinking if doing it to my bike.
Thank you.
Jeah looks like there is no bottom headset and even if there’s one, was it an integrated one or just a bearing and where does it sit on the adapter? Questions over questions
I have a tapered frame but not a big budget for a fork. I am looking at the Suntour Epixon but most sellers dont have it tapered. I found one on ebay that is tapered but only 100mm and i think im just going to adjust the travel of it to 120mm.
These adapters are confusing. I dont want to get into that. 😬😑
Maraming salamat.. laking tulong neto
How about tapered fork to non tapered frame ? is it possible ?
Yes. There are numerous kits, Cane Creek and Wolf Tooth are some of the best. And there are less expensive kits out there
Lazada sir? May link ka?
Sir good day po pwede po ba yan sa 26er?
please link store ty...
I don't get these new tapered frames. It's impossible to fix something that's not broken.
🤣
Same on my bike sir cube elite
So I thought my frame had adapter built into the frame for nontapered forks but it was all just the adapter...
sir pwede ba kahit saang frame basta tapered?
Pwede kasi isa lang naman ang sukat
Ang galing! Super nawala ung kaba ko sa clip nyo sir. Nagbubuo kse ako ng mtb ngayn. Sa sobrang excited ko sa mga part at pra mabuo ko na. Ndi ko naisip na kelangan pag taperred frame dapat tapered din ang fork. Nabili ko na bago ko nlaman na ndi pla sila swak. Question sir, iba2 ba ang sizes ng adapter o standard na sya?
hanap ka lang adoptor sir, kase akin tapered head tube din, tapos fork ko non tapered
Hi sir anong tawag po sa adapter na yan? thanks po.
Tapered Steerer Tube Conversion 1 1/8in to 1 1/2in
Hello sir ask ko lang kung saan kayo nakabili nung ganyang adapter?
Sa shopee meron
Philbox anong itatype sir sa search bar?
You can find it in aliexpress
Sealed bearing po ba yung nakakabit dyan? Tapos kapag ba nilagay yang adaptor wala na need baguhin po
Thanks man!
tnx sa tutorial idol
Do you have link sa seller sa lazada?
thats weak as hell compared to the original fork against the inside of the headtube. Hope its not used for mountain biking or anything.
this will destroy the bearings, it puts pressure on the wrong place, you really need a bottom cup
edi bumili ka ng sealed bearing easy
Ps: tapered frame with tapered headset lang gagana. Kung tapered frame ka at non tapered headset mo di sya pwedi
ilang araw bago dumating boss?
Link nga po sir ng item plsss. Thanks
You need an adapter including the bearing dude..
No need dude, the bearing is already there. Just the adapter for the fork to make it big enough and copy the size of the tapered fork.
@@MotoPare boss means pag lagay nang steering adapter may bearing pa rin ilalagay? Yung stock na 44mm?