TVS Apache RTR 200 4v Fi | Valve Tappet clearance? | Eliminate Tappet noise
HTML-код
- Опубликовано: 6 сен 2024
- Adjusting valve clearances is very important for a bike to to run optimally. You can do it yourself even if you are not an expert. Just follow along and the end result will definitely improve the way your Apache RTR 200 4V performs!
For further assistance you can DM me on instagram.
You can also visit my workshop after contacting me.
If my content helped you then you can donate me on Patreon. Anything will be appreciated!!
/ ezmeck
UPI: mr.rsphotos@okaxis
Links of the special tools used in this video:
Feeler Guage:
Stanley(costly but most accurate)
amzn.to/3uNIx03
Tappet adjuster tools
amzn.to/34FuJdA
PLEASE SUBSCRIBE TO MY CHANNEL AND PRESS THE BELL ICON TO STAY NOTIFIED.
IF YOU ENJOYED WATCHING THE VIDEO THEN LIKE COMMENT AND SHARE THIS VIDEO. THANK YOU!
Donate me on Patreon. Anything will be appreciated!!
/ ezmeck
FOLLOW ME ON FACEBOOK
/ rajib.sarkar.39
FOLLOW ME ON INSTAGRAM
/ ezmeck.yt
tvs authorized service center basically ignore this very very important task during the service...so we have to do it ourselves..after doing the settings...my bike's performance has been drastically improved..and bike became much more smoother..tvs should do this in service... anyway thanks vai.. excellent job❤️❤️❤️❤️❤️
May THROTTLE RESPONSE bless you.
@@EzMeck ayy yeahhh❤️❤️❤️
Bike kab li thi?
TVS does this adjustment but only when asked or if the noise if considerable. As you said, this must be add to their jobsheet as default ( just like tyre pressure check or water wash ).
bro u just explained the procedure very well and peacefully since I was unable to open my tank by myself but now I can......thank u very much sir❤❤
This is not for common people.
Please make more videos on Apaches. I will share them in Apache Owners groups. 👍
I will try to cover as many topic possible. Thanks for your support!
Is there Apache owner group? How do I get into it?
@@Nimbusdraws through Instagram. Or ask your dealer.
Very interesting video for every apachians 🙏🏻
Bro can you show a video on how you put back all the components?
Hello i have valve sound problem to , but this sound starting when, engine is hot, and when this become cold, sound is disappearing. this metod will fix my problem?
because in tvs center, they adjusted valve 0.6mm, but when engine become hot sound is starting again.
Sir tippet setting settings se bike ki top speed increase hogi kya ?
Meri RTR 200 2021 ...120..124 tak hi jati he.( Bike ka pick up our smoothness achchi he bus top speed pehlese kam he
TVS RTR Apache 200cc ke full engine videos banao sir ji
Amazing brother was looking around for this 🙏👍
Glad that helped! Kindly share!
I completed 20k kms with my rtr200. Should i check clereances? I heard No tappet noise
This video help's me to understand the problem of my bike 160 2V but service boys are saying there is no problem.
And they told me to run my bike in full power even in high rpm .
Can you tell me the valve clearance of 160 2V
Hola amigo como esta? Te hablo desde colombia, yo tengo una apache 200 4v modelo 2022 y mi moto me a presentado un sonido solo cuando esta caliente, la he manejado por 30 o 40 minutos para calentar bien el motor ya le cambie cadenilla y las guias y calibre valvulas y los balancines todo lo revisaron y esta bien, a que se podra deber esos sonidos que paresen valvulas descalibradas pero que no son y por que motivo se descalibran las valvulas si los balancines estan buenos? Te agradezco mucho la respuesta SALUDOS
ya revisaste el tubo del exhosto?
Bro I also face this issue when i adjust the sound reduce when ride 20 k.m sound again come what the problem bro
New 2022 model me 0.06mm both intake exoust dono me same hota hai na ?
What is the bennefit I will notice if i decarbon the engine head and if i also change the tappet,valve and rocker arm in 160 4v?
Bro does your rtr 200 gear has a sharp noise when you switch gear. Like every bikes. In my rtr 200 (bs4) when we change gear there's no sound ,it's like we really don't know that we changed a gear.
Align marker pe v rehne par valve tight kyun hai.
Maine dono align mark ko sahi jagah pe rakha hai.
Tabhi lock nut ko rotate karne se valve tight lag raha hai aur spring dheela v ho ja raha hai.
Solution kya hai bataiye plz
My apache 200 bs6 is 2 month old 1500km in odo n giving engine noise .any solution plzzz?????
how much km have it until you hear valves ticking ?
Helpful👍🏻👍🏻👍🏻
Please make contents related to R15-MT15
No one in my friends circle have it.
Same video with Gixxer 250 please
Will try, cannot promise.
Tappet clearance engine running ke baad (i mean after starting engine) karna chahiye ya nahi. Ya fir cold condition me karna chahiye.
cold condition mein..
Heating of rear disc plate compared to front is normal with rtr200 bs6?
Yes
Please use front brake more. Ratio of breaking for rtr200 is 65:35 . So front break is more effective for slowing down vehicle. For emergency brakes use both.
Bro my bike is not running to much any suggestions for me
Fzs v3 ke sprocket me kitne teeth hai plzzz help
Superb 👍🏻🤞❤️
I've tried adjust the clearance from 0.05mm to 0.08 mm..
So many times..
Even changed rocker arm
Tappet sound still present.
Any suggestions?
Is this valve clearance same for 1604V??
Hi, are you facing any power Lag or jerks while maintaining constant Speeds in the range 50-60 km/hr in 5th gear..
Many of the 200V riders have reported the same issue, TVS guys are trying to solve the issue with ecu updates.
Sir merko b dikkat aa rahi hai jerks ki .how to solve it???
@@aloneriders2690hi,when I given for 2nd service I have mentioned this problem...they said they have resolved....don't know what they have done...next day it started giving jerks again...even service people don't know the exact cause.better tell them to update/reflash the ECU once.
@@krishnaathkuri I have just bought 3 days back n bike is giving lot of issues
@@aloneriders2690 what happened bro...did you received any damaged piece or what?
What is SZR clearance?
.08mm intake .12mm exhaust
R15v2 ka tappet clearence?
Bro apne ko fzs v3 ka chain sprocket change kia hai usme kitne teeth hai PLZZ bato
14-41
Am facing overheating issue in my bike avenger 160bs6 (10000km).... What is the correct time to adjust the tappet...Plz guide
It is generally recommended to check valve clearance every 5-7k kms, and do necessary adjustments. This can vary if the tappet noise is noticeably high. If you are facing iver heating issue, use one higher grade engine oil, i generally suggest bajaj users to put motul 3100 20w50. Works very well, keeps the engine cool, and reduces noise level.
No you should not use 20w50 engine oil as oil pump can't pump oil to head and various gallery inside engine while designing engine the oil passages are made keeping in mind 10w30 which tvs recommends use only recommend oil from company owners manual ... Or else no warranty or can damage ur engine... For some km the engine may feel no sound or smooth but that would be dancing ur engine from inside
🤝
yamaha SZ RR mei kab karna chahiye???kitne kilometers baad karana chahiye??
Every 6-7k kms k bad,
@@EzMeck ami ekti sz rr service manual peyechi...kintu english e noi....chai ki tomar??
Mail koro kindly, mr.rsphotos@gmail.com
Kitne km p set krna hota u
Every 10k kms.
Bro meri baik ka bhi nois ata hai srvish sentr valo k bola k tepet seting krdo to bolte hai ki bs6 hai itna nois rahega tepet seting karne ki jarurat nahi hai ab me kya kru 🤔
Bro aap kaha se ho
In my opinion, agar koi expert ye kam karna chahe to hi karao, warna noise reduce karne k liye jugaadu mechanic se ye kaam karanese behtar hai ki thora noise sehen karlo.
Mere ko bhi yehi bola service center walo ne..... Lekin ye sound bht irritating hota hai
I doubt service wale itna time deke kar rahe honge. Booklet me clearly mentioned k 1st service me tappet adjust karna hai, aur mere service walo ne completely ignore kar dia.
Nehi karte hai, un logo k pas utna time hota nehi hai, free service k liye to bilkul hi nehi.
मेरी गाड़ी पानी में डूब जाने के कारन सेल स्टार्ट नही हो रहा है
Hii bro Apache RTR 160 2v ka clearance kitna karna hai please tell
Same bro, 0.06mm intake 0.08mm exhaust. Service limit 0.08mm intake 0.10mm exhaust.
Bhai mene 1 month phle li thi or 1200 km chal gyi h..mera engine free nhi chlta h kya prblm hogi
Ride for atleast 2000kms then get it diagnosed.
👌👌
Bro apache 200 4v fuel filter iruka
sorry I dont understand your language
Bro fuel filter
🤗🤗❤️❤️👍👍
এত তাড়াতাড়ি ভালভ ক্লিয়ারেনস চেক 😟🥺
Ha, tappet theke noise aschilo.
in the service manual it is written to check clearance in 1st service and 4 the service..in 1st they didn't do it..so we did it ourselves.. service center is basically useless 😂
Dada plz proper address ta dao amr bike ta the onek prblm a6e FZs v2
DM koro instagram a
@@EzMeck dada bujlam na
Instagram ache tomar? Tahole okhane message koro ami address dichi, video description a facebook instagram links ache, jekahne hok msg kro.
Bhai ek bar appka number send karo
Please contact me on instagram, dm me @ezmeck.yt