I really can't believe that a guy who has been involved in airsoft for so long and who has had so many airsoft replicas in his hands didn't notice that the Wingun 1877 revolver he is testing has depowered bullet shells: you can clearly see that the bullet shells have a choke to reduce the flow of gas (the hole for the CO2 to pass through is very small); you just need to open the shell and remove the choke (or buy a set of standard power cartridge shells) to make the gun shoot at its normal power; I have that gun and I can assure you that with normal shells it can easily shoot over 2 Joules.
I dont know if its just me, but it also sounds like the CO2 cartridge wasn't full, almost like it wasn't sealed all the way and had slowly leaked out all the CO2 before he could shoot. Even with depowered shells it shouldn't shoot that bad.
@@blind8305 It is possible, as it is also possible that there was a problem with that particular CO2 canister; however, the constriction inserted in the shell is alone sufficient to justify such low values: at minute 10:12 you can see how the lumen of the rear holes of the shells are almost completely obstructed by the reduction cylinders, whose internal hole is really very very small determining a very low gas flow; you should then consider the weight of the bbs used: with 0.20g bbs and NORMAL shells, this replica shoots at just over 2Joules, but using 0.30g bbs the power exceeds 2.5Joules; by increasing the weight of the bbs even further up to at least 0.36 or 0.40g you easily reach values close to 2.8 or even 3Joules due to the Joule creep effect which in this type of replica is always very pronounced; power, accuracy and range are greatly affected by the weight and quality of the bbs used, and there is no information about this in the video.
@@bens_liftsbro stfu you think you’re so cool don’t you. He does it as a joke it’s like an inside joke on his channel. It’s not cringe bro you just think you’re cool and edgy.
I was surpriced. That there was not a review on the utr45. In Europe it is considered a very good gun. It is very easy to upgrade. And the mosfet is a very high quality with light sensor trigger... and use 11.4v lipo
There are 2 listings for slightly different models on evike, the US’s main airsoft site. This one was recently added, so no reviews, but the original one has an overwhelming 5 star rating.
CO2 cartridges are highly compressed cylinders of liquid carbon dioxide. As the liquid CO2 is released, it turns into a gas and makes your cartridge ice cold. This frost-all-over-the-cylinder sort of cold is thermodynamics in action: Changing from a liquid phase to a gas phase requires energy.
I can't lie, the UTR-45 is one of the best budget guns I've ever used… brought one for my daughter, but i've used it to great effect on the field. Outstanding for
Ok hang on the UTR-45 is widely reviewed and probably one of them best starter AEGs on the market. This is what I got to start playing and honestly very happy with it so far.
Price in my country. 1. blue m9 is only 1 bucks, bulk buy is 60 cent. 2. spring m4 is only 4 bucks. 3. co2 revolver is 75 bucks. more of a decorate stuff. 4. urx3 is 150 bucks. 5. H9 is 175 bucks. VFC P320 is a bit more expensive but much better. 6. emg f1 is 290 bucks. with that money, i would buy VFC stuff.
@asu-57tankoffical you mean WE Taiwan ?? Yeah it's good. Durable part, cheap repair but paint job is not the best, recommend gen 5 glock since gen 4 have a god awful finger notches. Or if you have more money, get VFC M18, double the money but superior quality, its basically a replica and its also the same as my service pistol.
For anyone buying the gas blowback M4, a friend had a similiar problem, we didnt knew what was with it and thought it was either a problem with the hopup or mag. Later we tried different mags but still there were problems. Ive had an idea to lube the bolts sides and we got it working. We realised the bolt rubbing against the reciever was causing the jams and the buffer sometimes pushed it into battery but sometimes jammed it. Its common with GBBRs to have this problem if they have looser springs. Also if you put a HPA mag inside the dropoff of FPS isnt an issue anymore so that is needed to take for consideration.
I find it hilarious when airsoft guns have fake pistol brace stocks. A pistol brace is literally for when you can’t legally put a stock on a gun without registering it as an SBR. There’s no reason for a fake look alike lmao
ive got a utr 45 and by only upgrading the spring, barrel, and bucking ive been able to reach the maximum allowed fps at my local field it even goes over it. the only problem with it is accuracy over long range too but that can be fixed with hop up, heavier bbs, or longer barrel
The semi alone is unreal and the full auto is something else. This gun is only $210 for the most expensive model. It does not come with a battery but is still sooooo worth getting.
Speaking to the co2 pistols shooting hot, I bought this weird glock/USP mash up, second hand at a pawnshop. I couldn't bring it to fields, with .20 bbs she was hitting 650+fps, it was terrifying close range. Ended up keeping it around for "home defense" because full metal and looks realistic enough if someone's trying to break into my balcony. Recently sold to a neighbour though
the utr45, company is Double Eagle and I have their Mutant UTR EK47, first airsoft rifle and holy smokes is it lovely to use and shoot. Really happy with the purchase and really recommend their products
i actually have on of those $20 M4’s. you gotta really slam the mag in and it’ll shoot pretty well actually despite feeling like plastic junk. i clocked it with .32g bbs at 325fps which actually is pretty good considering i bought it for 12 bucks on ebay
6:35 as a girl's frontline player, you made me think of a combination of the stats of ump45 (love her, if anyone reading this knows an airsoft ump45 that is not made by umarex, let me know pls) and ST AR-15... it could be an actually great character, high evasion, high acc, high dmg, high RoF, it would be a beast of T-Doll, and if you add crit mod, damn... that would be scary
6:50 - there's no way in hell the DE UTR45 has no reviews. It's one of the better starter guns if the player wants something light and compact. 21:25 - these don't get bought because the inner barrel and hop rubber are proprietary and, unless you're a machinist, cannot be changed. I have their Kar98K and it's the same for that too. I use the shell ejecting rifles at my CQB field because I get someone to 3d print the shells for me rather than losing the stupidly expensive metal ones.
I believe so. Before I spent lots of money on getting more expensive equipment and gear I bought one for a beginner gun. It’s insanely good for the price it has many features and I would recommend as a budget friendly / beginner gun.
The UTR-45 (which is meant to be a replica of the LWRCI SMG-45, btw) is hilarious to me because of the pistol brace... It's not a real gun, so you don't have to bother with a pistol brace due to NFA restrictions like with real ones 😂. Speaking of real guns, I have an actual Hudson H9! I wouldn't depend on it as an actual defensive gun (parts breakage is common in them) but it's fun at the range and for competition. Bought it right after Hudson went under, so only cost me about 3 times what the airsoft one costs for the real thing...
if it was colder than 60 degrees outside thats probably why the gas blowback wasnt working. cold weather and gbbr do not mix, the bolt probably didnt have enough strength to go far enough back to cycle the next round and the range of the bbs could be from not enough consistent gas flow due to the cold
Quick additional note: Airsoft manufacturers (or at least VORSK) do offer gas that works better in colder temperatures (VORSK specifically offering V8 and V12 gas)
I was going to recommend you guys to the KWA Ronins since i have had 2 of them that have lasted me over 5 years, Are easy to modify and used to be priced really great... but they are out of stock on most of their items right now and the price has gone up from 400$ to 460$ since i got mine in 2018. I got a precision barrel and hop up for my rn10 back in 2019 when i was in Japan and that's it. The rest is bone stock running an 11.1 tamiya lipo hard for a couple seasons. it sat for a year but i broke it out of storage and it still runs like new. The simulated recoil is also pretty fun, I spend most of my time at the range with live ammo but the simulated recoil kicks harder than a 9mm, not as much as a 5.56/223 but its still impressive for airsoft.
I own the utr45 but with larger stock for the battery. Such an awesome gun! Could use some upgrades tho. Mine had inconsistent accuracy, but doing research, others did not have that issue
Use the non restricted cartridges for the Model 3. or drill the bottom of the cartridges you alreaddy have with a 3mm drillbit. Power should go up to ca 450 fps with 0,2 gram 😉
With the GBB at the end it seems like you broke the feed arm on the nozzle. Sometimes they're pretty weak and don't take much to snap. The every other round feeding was probably when it was broken, but still attached a little, and then broke off and stopped feeding completely. Pop out the bolt and turn it upside down and you should be able to tell if it's snapped off fairy easily.
Hey guys just a tip, of you are on kobile while watching this video. DON'T SKIP the war thunder ad part but hold the screen and fast forward in 2x it helps put creators when you dont skip ads 😊
i actually have the UTR-45 bought it last year, & after playing with it for a year, it's racked up a total of 2 issues the least of the 2 issues being that the mechanism that holds the stock in place when it's folded snapped after about 3 months, & the more serious one is that recently {within the last 2 or 3 weeks} the trigger spring snapped on me when i pulled it, & when i attempted to remove grip to repair it, one of the screws that hold the grip on is rounded from the factory, & i'm now out of my 1 year warranty period... altho i still think this gun is well worth the money, however seeing as the one in the video looks different to mine, i have to wonder if the one in the video is a newer variant of the same gun? mine came with all the same accessories, but it has a rubber grip rather than the plain plastic one in the video, & mine doesn't have the american flag on the side of the magwell, but has the DE Airsoft logo
Back in the days i was jealous that in most countries full auto is legal....but longtherm wise i prefer to not have to use these orange tips on any airsoft😂
This guy doesn’t know about revolver gas leak. That’s likely why the fps was low on the revolver. You learn real quick when you put your thumb on the cylinder of a .357 mag like I did 😅
I got a Novritsch SSE18 when trying to get into airsoft, gun came broken with a broken trigger, and even after we fixed it it wont feed ANY pellets out of the standard mag. Perhaps its the world saying no xD
the lever action could have some work done to it with the hopup and better barrel, also with the shells not ejecting is most likely on u since u don’t seem to be going all the way with the lever which will cause jams.
🔥Play War Thunder for FREE and get a massive bonus pack! PC, PlayStation and Xbox - wtplay.link/wagwt 💥 WT Mobile - wtm.game/wagwtm
how was this posted 10 hours ago when the video was posted 25 mins ago
@@VRdummy-o3bliterally about to say the same thing
HAPPY 1M BDAY
W
@@Random_p.e.r.s.o.nhello?
I really can't believe that a guy who has been involved in airsoft for so long and who has had so many airsoft replicas in his hands didn't notice that the Wingun 1877 revolver he is testing has depowered bullet shells: you can clearly see that the bullet shells have a choke to reduce the flow of gas (the hole for the CO2 to pass through is very small); you just need to open the shell and remove the choke (or buy a set of standard power cartridge shells) to make the gun shoot at its normal power; I have that gun and I can assure you that with normal shells it can easily shoot over 2 Joules.
I dont know if its just me, but it also sounds like the CO2 cartridge wasn't full, almost like it wasn't sealed all the way and had slowly leaked out all the CO2 before he could shoot. Even with depowered shells it shouldn't shoot that bad.
@@blind8305 It is possible, as it is also possible that there was a problem with that particular CO2 canister; however, the constriction inserted in the shell is alone sufficient to justify such low values: at minute 10:12 you can see how the lumen of the rear holes of the shells are almost completely obstructed by the reduction cylinders, whose internal hole is really very very small determining a very low gas flow; you should then consider the weight of the bbs used: with 0.20g bbs and NORMAL shells, this replica shoots at just over 2Joules, but using 0.30g bbs the power exceeds 2.5Joules; by increasing the weight of the bbs even further up to at least 0.36 or 0.40g you easily reach values close to 2.8 or even 3Joules due to the Joule creep effect which in this type of replica is always very pronounced; power, accuracy and range are greatly affected by the weight and quality of the bbs used, and there is no information about this in the video.
He's not very bright he'll just grab and go rather than actually giving anything a try or actually looking at them, pump and dump video production.
just, watching this man from an outside perspective, knows nothing about guns, even less about airsoft. its just a wallet warrior.
He did the same thing with the danwesson
9:36 “Arthur, I have a plan” ahh revolver
This one looks more like a scholfield than a volcanic Dutch
It is the Schofield
@@QuandaleDingle5752 Which is in rdr
Comment with most likes it gay
English or Spanish?
Ur gay…
Cringe
Just for this lets make you the most liked
The most commentary with gay is like
Utr45 is one of the most bought beginner guns at my home field 😅
I actually hpad a utr45
its not review prolly cuz it looks so weird
1:24 that devil snail still haunt me
I’m top tier in. Russian German and us ground and top tier in air in us and Russia and rank 5 in French air and ground and rank 5 in German air
Can’t even escape the snail on RUclips
What does that. Mean
@@Mrbananavr87 War thunder’s developer. Gaijin’s logo is a snail.
@ oh I don't play much war thunder
The snail never dies....
the moment you sold your soul you should have known this would happen
WHO CALLS IT A CARCAGE 😂
Him always
🤣😭😭glad someone brought it up, it’s so dumb and cringe isn’t he supposed to know abt airsoft and terms for the guns/how to pronounce
@@bens_liftsbro stfu you think you’re so cool don’t you. He does it as a joke it’s like an inside joke on his channel. It’s not cringe bro you just think you’re cool and edgy.
@@bens_lifts lets not mention him calling blowback/recoil "kick back"
@ oh gosh… yeah that too is terrible 🤣
14:10 , the police probably opened it up to check it
I was surpriced. That there was not a review on the utr45. In Europe it is considered a very good gun. It is very easy to upgrade. And the mosfet is a very high quality with light sensor trigger... and use 11.4v lipo
There are 2 listings for slightly different models on evike, the US’s main airsoft site. This one was recently added, so no reviews, but the original one has an overwhelming 5 star rating.
I think he’s using the US version of the website
Also im quite sure hes using mostly 0,2g bbs
Double Eagle is a rather unknown brand here in America, but theyre good from what i have seen
2:58 to skip the sponsor
Thanks
Thx bro👌👍👌
Thanks mate
Thanks Bruv
thank you
I wonder how many CARCAGES he brought with him 😂😂😂
... what in the seven hells is a co2 carcage........?
CO2 cartridges are highly compressed cylinders of liquid carbon dioxide. As the liquid CO2 is released, it turns into a gas and makes your cartridge ice cold. This frost-all-over-the-cylinder sort of cold is thermodynamics in action: Changing from a liquid phase to a gas phase requires energy.
@@the-flaming-forest13He was joking.. he said carcage instead of cartridge
@@KidsBrown89 oh ok lol
@@KidsBrown89 Multiple times, which means he actually doesn't know how to pronounce the word.
It's what Kim Jong Un loads his pistol with. 😂
9:36 "Who amongst you is with me and who is betraying me"
I can't lie, the UTR-45 is one of the best budget guns I've ever used… brought one for my daughter, but i've used it to great effect on the field. Outstanding for
Ok hang on the UTR-45 is widely reviewed and probably one of them best starter AEGs on the market. This is what I got to start playing and honestly very happy with it so far.
Easy to hpa as well
@@Callsign_Magman
Everything standarized is easy to hpa lol
@ fair enough after doing so many installs it’s just second nature
Price in my country.
1. blue m9 is only 1 bucks, bulk buy is 60 cent.
2. spring m4 is only 4 bucks.
3. co2 revolver is 75 bucks. more of a decorate stuff.
4. urx3 is 150 bucks.
5. H9 is 175 bucks. VFC P320 is a bit more expensive but much better.
6. emg f1 is 290 bucks. with that money, i would buy VFC stuff.
I heard their Glocks are good, that true? Since I want one.
@asu-57tankoffical you mean WE Taiwan ?? Yeah it's good. Durable part, cheap repair but paint job is not the best, recommend gen 5 glock since gen 4 have a god awful finger notches.
Or if you have more money, get VFC M18, double the money but superior quality, its basically a replica and its also the same as my service pistol.
Say Cart - “Cart”
Say Ridge - “Ridge”
Say Cartridge - “Carcage”
Gets me every time🤦🏻♂️
Same lol
@@bens_lifts he has a speech defect
@ yeah I can see that now
The UTR45 has my heart
Edit: did you not install the charging handle in the UTR????
I swear bro this guy gets a new property for filming every year
It's all that carcage money he has lying around.
snail takes another victim
For anyone buying the gas blowback M4, a friend had a similiar problem, we didnt knew what was with it and thought it was either a problem with the hopup or mag.
Later we tried different mags but still there were problems.
Ive had an idea to lube the bolts sides and we got it working.
We realised the bolt rubbing against the reciever was causing the jams and the buffer sometimes pushed it into battery but sometimes jammed it.
Its common with GBBRs to have this problem if they have looser springs.
Also if you put a HPA mag inside the dropoff of FPS isnt an issue anymore so that is needed to take for consideration.
the snail is already trying to take me back because I havent played War Thunder for 2 days💀
I find it hilarious when airsoft guns have fake pistol brace stocks. A pistol brace is literally for when you can’t legally put a stock on a gun without registering it as an SBR. There’s no reason for a fake look alike lmao
I’m diggin these unreviewed experimental airsoft weapons using top secret carcages.
this sort of content gives a good perspective of what the lower end of airsoft offers
2:51 to skip sponsor
Underrated comment ong
W man
6:10 but you got a magazine at least
ive got a utr 45 and by only upgrading the spring, barrel, and bucking ive been able to reach the maximum allowed fps at my local field it even goes over it. the only problem with it is accuracy over long range too but that can be fixed with hop up, heavier bbs, or longer barrel
I get happiness when wag posts a new vid
Best feeling when you realise wag uploaded❤
The semi alone is unreal and the full auto is something else. This gun is only $210 for the most expensive model. It does not come with a battery but is still sooooo worth getting.
he stopped giving 5 star honest reviews..
28:30 That is straight up a full bolt lmao
Best way to start my morning.
Speaking to the co2 pistols shooting hot, I bought this weird glock/USP mash up, second hand at a pawnshop. I couldn't bring it to fields, with .20 bbs she was hitting 650+fps, it was terrifying close range. Ended up keeping it around for "home defense" because full metal and looks realistic enough if someone's trying to break into my balcony. Recently sold to a neighbour though
the utr45, company is Double Eagle and I have their Mutant UTR EK47, first airsoft rifle and holy smokes is it lovely to use and shoot. Really happy with the purchase and really recommend their products
Revolvers have a cylinder gap the loose fps on firearms too. It also might be that bullet system it was using
I am never bored of your videos
28:01 Bro had to process the stats 😅
i actually have on of those $20 M4’s. you gotta really slam the mag in and it’ll shoot pretty well actually despite feeling like plastic junk. i clocked it with .32g bbs at 325fps which actually is pretty good considering i bought it for 12 bucks on ebay
Oh No Not the Snail, i already got 3000+ hours. Pls have mercy
Go gamble your life away to the snail
He everywhere. I think he wants me to buy another pack
7:11 ALRIGHT I MIGHT HAVE TO GET THIS IT'S ACTYUALLY HELLA SWEET FOR THAT PRICE TOO
Put lighter BBs through the Schofield model 3 revolver. That will increase your fps and your hopup.
6:35 as a girl's frontline player, you made me think of a combination of the stats of ump45 (love her, if anyone reading this knows an airsoft ump45 that is not made by umarex, let me know pls) and ST AR-15... it could be an actually great character, high evasion, high acc, high dmg, high RoF, it would be a beast of T-Doll, and if you add crit mod, damn... that would be scary
Girls don't play video games
@JordanColeman-r8w wut?
@Elizabeth_BLux I'm just being StEwPiD, sorry
@@JordanColeman-r8w haha, that's fine while it's just a joke
the snail is the sponsor of this video no way😂🔥
I cant even escape the snail while watching airsoft
Damn, this dude managed to put so much product placement yet so smoothly. 'Merica hell yeah
I think revolver has small FPS because there is free unsealed space between cylinder and rest of the gun, which causes gases to escape
The notification made me lose my game💀
Lol
Same
How so relatable
@@DuckDenis idk
do not disturb.
putting the de utr45 in the thumbnail is wild
10:33
If you will look at the automatic lyrics, it will say not 0.56 Joules, but 0.56 Jews🤣🤣🤣
I miss old wag videos 😭😭😭
6:50 - there's no way in hell the DE UTR45 has no reviews. It's one of the better starter guns if the player wants something light and compact.
21:25 - these don't get bought because the inner barrel and hop rubber are proprietary and, unless you're a machinist, cannot be changed. I have their Kar98K and it's the same for that too. I use the shell ejecting rifles at my CQB field because I get someone to 3d print the shells for me rather than losing the stupidly expensive metal ones.
make a video with aliexpress guns , that could be interesing
Many airsoft RUclipsrs have done that, they buy airsoft from wish, temu, and aliexpress. It’s just beating a dead horse of content
Was this a Double Eagle UTR 45?
I believe so. Before I spent lots of money on getting more expensive equipment and gear I bought one for a beginner gun. It’s insanely good for the price it has many features and I would recommend as a budget friendly / beginner gun.
@Octyn_ yeah I got one too, I am bery proud of it, since it looks so cool compared to every boring M4 I see on the field...
@@Pita fire bro 🔥 enjoy it
Why do i enjoy watching this guy testing toy guns.. 100 channels with real guns, but nooo somehow i end up watching this guy 😂
9:20 soild not solid. Thats why i love this channel lmao
The UTR-45 (which is meant to be a replica of the LWRCI SMG-45, btw) is hilarious to me because of the pistol brace... It's not a real gun, so you don't have to bother with a pistol brace due to NFA restrictions like with real ones 😂. Speaking of real guns, I have an actual Hudson H9! I wouldn't depend on it as an actual defensive gun (parts breakage is common in them) but it's fun at the range and for competition. Bought it right after Hudson went under, so only cost me about 3 times what the airsoft one costs for the real thing...
if it was colder than 60 degrees outside thats probably why the gas blowback wasnt working. cold weather and gbbr do not mix, the bolt probably didnt have enough strength to go far enough back to cycle the next round and the range of the bbs could be from not enough consistent gas flow due to the cold
Quick additional note: Airsoft manufacturers (or at least VORSK) do offer gas that works better in colder temperatures (VORSK specifically offering V8 and V12 gas)
@@british35 I always end up with American V8 gas after eating tacobell.
I was going to recommend you guys to the KWA Ronins since i have had 2 of them that have lasted me over 5 years, Are easy to modify and used to be priced really great... but they are out of stock on most of their items right now and the price has gone up from 400$ to 460$ since i got mine in 2018. I got a precision barrel and hop up for my rn10 back in 2019 when i was in Japan and that's it. The rest is bone stock running an 11.1 tamiya lipo hard for a couple seasons. it sat for a year but i broke it out of storage and it still runs like new. The simulated recoil is also pretty fun, I spend most of my time at the range with live ammo but the simulated recoil kicks harder than a 9mm, not as much as a 5.56/223 but its still impressive for airsoft.
HAPPY 1M BDAY!😊
UTR-45 has me scratching my head. First ATF compliant airsoft gun I've ever seen. Why did they do her dirty with that brace??? 🤣
I own the utr45 but with larger stock for the battery. Such an awesome gun! Could use some upgrades tho. Mine had inconsistent accuracy, but doing research, others did not have that issue
Use the non restricted cartridges for the Model 3. or drill the bottom of the cartridges you alreaddy have with a 3mm drillbit. Power should go up to ca 450 fps with 0,2 gram 😉
“I Rated Airsoft Guns with 0 Reviews!“
The thumbnail be like: oh so now you’re lying huh?
H9 is a real nice pistol love to have that in my loadout.Good accuracy,nice iron sights,just what I’m looking for!
😮
You out here doing us a service thanks man !
I have a utr45...it's cool when it works...the mags tend to jam if you fill them to capacity so I only load to about 80%
i am always happy when wag posts a new video
Honey wake up wag entertainment dropped a new video
@@BradyDaniel-hl4hv YEAHHHHH
You should try upgrading one of these to see if you can exponentially improve it
“0 reviews” proceeds to show a review on the thumbnail, smart fella we got here
With the GBB at the end it seems like you broke the feed arm on the nozzle. Sometimes they're pretty weak and don't take much to snap. The every other round feeding was probably when it was broken, but still attached a little, and then broke off and stopped feeding completely. Pop out the bolt and turn it upside down and you should be able to tell if it's snapped off fairy easily.
All love Wag, but you gotta use the right batteries with the right replicas! Utr is way better off 11.1
It’s nice to see that even 20 years later g&p still unbox the same as they use too lol
Bro some of those guns were CRAZY!!!!!!😂
Hey guys just a tip, of you are on kobile while watching this video. DON'T SKIP the war thunder ad part but hold the screen and fast forward in 2x it helps put creators when you dont skip ads 😊
Jump ahead button!
Watched this and got my skull crushed by thighs, 10/10 video
I was actually thinking of the Winchester 1892. Thank you
Damn if I ever have enough I'll probably get the utr 45 as a CQB option turn my Lancer Tactical Gen 2 into a outdoor long-range weapon
I was thinking about getting that lever action too
11:28 the voice crack😂
i actually have the UTR-45
bought it last year, & after playing with it for a year, it's racked up a total of 2 issues
the least of the 2 issues being that the mechanism that holds the stock in place when it's folded snapped after about 3 months, & the more serious one is that recently {within the last 2 or 3 weeks} the trigger spring snapped on me when i pulled it, & when i attempted to remove grip to repair it, one of the screws that hold the grip on is rounded from the factory, & i'm now out of my 1 year warranty period...
altho i still think this gun is well worth the money, however seeing as the one in the video looks different to mine, i have to wonder if the one in the video is a newer variant of the same gun? mine came with all the same accessories, but it has a rubber grip rather than the plain plastic one in the video, & mine doesn't have the american flag on the side of the magwell, but has the DE Airsoft logo
You should do a review of the AAPO one
9:49 Co2 Car-ka-gis 😹
i risked buying a gunstock for vr with 0 reviews
So true bro it really does look like a law enforcement training pistol😂😂
Back in the days i was jealous that in most countries full auto is legal....but longtherm wise i prefer to not have to use these orange tips on any airsoft😂
Shadowless super combat equipment NO:126T please review this gun please 😢
the lever action was for squirle hunting thats why it was shooting high
UTR is actually my main aeg in the arsenal. works perfectly at my local indoor field and the falcon control system is an excellent titan replica
UTR 45 is a replica of LWRC SMG-45. I quite like Double Eagle one with ACR style stock
This guy doesn’t know about revolver gas leak. That’s likely why the fps was low on the revolver. You learn real quick when you put your thumb on the cylinder of a .357 mag like I did 😅
I got a Novritsch SSE18 when trying to get into airsoft, gun came broken with a broken trigger, and even after we fixed it it wont feed ANY pellets out of the standard mag. Perhaps its the world saying no xD
the lever action could have some work done to it with the hopup and better barrel, also with the shells not ejecting is most likely on u since u don’t seem to be going all the way with the lever which will cause jams.
in germany it is normal to use at least 2J for sniperrifles on bigger fields lol
My favourite part is war thunder emptying my pockets
If you want to see some Reviews about the Double Eagle utr 45, then you find a lot of on european Channels!😅
23:08 Kentucky ballistics "you just got jammed"
You should try them with heavier bbs so the accuracy would increase