Tech Topics: Replacing Gunite Brake Adjusters with Haldex

Поделиться
HTML-код
  • Опубликовано: 23 янв 2025

Комментарии • 24

  • @PAT111
    @PAT111 5 лет назад +3

    Notice how the clevis pin hole 5/8” to 1/2” spacer magically appears at 2:00. They do everything to make it looks so simple.

  • @brandygarcia3502
    @brandygarcia3502 Год назад +1

    I love the fact that they never start from the beginning by releasing your breaks, they go straight into it😂

  • @deant876
    @deant876 5 лет назад +13

    The joy of replacing NEW PARTS. They always make it seem so easy "slide the slack adjuster off". More like beat the hell out of it with a hammer or use a puller (and say a few choice words because the pulle is not fitting on right)

    • @adrianovergara2942
      @adrianovergara2942 5 лет назад +1

      or cut in half with a oxy-acetylane torch and deal with grease spurting out with fire :P :P

  • @reevertransport3979
    @reevertransport3979 4 месяца назад

    When doing the AA-! Installation how do you know which hole to in the strap to put that over? Nearest or farthest? My problem is the brake is riding to tight.

  • @itsmisterchris
    @itsmisterchris 4 года назад +3

    What is a warsher

  • @richiepecor130
    @richiepecor130 3 месяца назад

    What if you don't have a pointer or slot?
    My haldex has no pointer

  • @Fleet_Tech_Complete_Reefer
    @Fleet_Tech_Complete_Reefer Год назад

    Great video

  • @danbrownellfuzzy3010
    @danbrownellfuzzy3010 3 года назад

    They installed the cotter pin with a push stroke. It's easier to use a pull stroke.

  • @jimmahr.4665
    @jimmahr.4665 Год назад +1

    I wouldn't want to sit here watch a guy drill out pins and stuff, here to see what the goal is, shorter and sweeter the better.
    Good vid, but wish they would explain why or what happens if you don't set the control arm (4:45) correctly.

    • @Thomas-qh3vj
      @Thomas-qh3vj Месяц назад

      If it isn't correctly set the brakes will start dragging

  • @elvinsanchez7962
    @elvinsanchez7962 3 года назад

    Una preguntita

  • @vicpetrishak1077
    @vicpetrishak1077 4 года назад +3

    Install clevis pin head facing brake shoes ,then you will be able to use an air hammer with a punch to drive pin out for future removal .

  • @bulldogblvd
    @bulldogblvd 6 лет назад +12

    WTF is a worsher??

  • @j.m.5995
    @j.m.5995 2 года назад

    That noise doesn't sound right

  • @pichaimanimaruthamuthu9088
    @pichaimanimaruthamuthu9088 3 года назад

    I am a mechanical. soveryusefullmessege.

  • @dieseltechnician6227
    @dieseltechnician6227 6 лет назад +2

    lmao cotter peas?? worshors??

  • @ateeqthekeng1
    @ateeqthekeng1 6 лет назад +1

    😂😂