My goodness that country is flat,a person can see a rain or storm coming miles away,ole Pablo is loving that jeep ride isn't he,Thankyou for the video,i learn something new or a new way to do something in a lot of your videos.
Thanks Brent. It looks like a farm truck, sounds like a hotrod and runs smooth as a cat walking on a sheet of glass. I enjoyed every “episode” of this build. Can’t wait to see it completed.
Hi Brent. I have to admire how you can laugh when the drive shaft measurements are out . When it goes wrong for me there’s a lot of bad language. But of course we’re on a family show . She’s coming along looking fine .👍🇨🇦🚘
Steering wobbled together, one man front clip without bolts, headlights signals action, running boards boarded, driveshaft 25 er 52 spun n welded her up, radiator steamed n ready to cook, drive'n forward n back again n again n again, practice makes perfect just ask Pablo.
Pablo looks so happy lol riding in the jeep and i never seen a comment about the old cabover chevy if you have one or know someone who does just shout out on ur video so i know to look at comments lol love everything you do man keep it up pablo will at least be happy he keeps his job as quality control
Benefits of the bike ride, bugs in the teeth but four wheels, or training wheels for us old guys, no reference to you Brent. It looks really good. Aluminum is one tuff cookie to get onto but the guys who do it make it look so easy and nice as well. One thing for sure, cleanliness is next to god when doing it. So with that, winter is only three months away... lets hope the water thaws out in the shop! I guess you could burn some old tires over the line to help heat the ground ... i done that once.. heated the ground about a foot if I was generous.
Not that you ever have time but IF you are going through a wrecking yard, wander the foreign section esp the German cars, many have hose fittings that have a smaller port running off them (sort of like regular plumbing fittings going to test ports), some are even slightly angled to help move hose over that bit, anyway, should be able to run the cross over feed to that, saves any welding and reduces total fittings used. Guessing short filler rod gets a little warm on the fingers? Ha, ha
Great progress. Almost done. You're the guy who has taken the mystery out of so many things in a custom build, IE; shortening the drive shaft. I've done engine swaps (not chassis) but never knew how to address all the other components of the chassis. Thanks for the education. Hi Pablo ! (He's a horse in that Jeep!). 👍😎🍺
These video's just get better . Very professional . Have you thought about wearing a head cam ? one of my go to first video channels when im needing to chill . Great work + good tunes
Congrats Brent on almost getting her done. a few things left to do, and take a boot down the road. It was great to see Cool Pablo taken a boot with u in the Jeep. lv ur crazy videos.
Hey Brent, nice progress on the 51, looking good. I would be interested in what happened to the Chev. Anyway, great program as always. Take care my friend 👍
Excellent video Brent :) also wiin for sure also glad your teaching experience your skills new everytime and get surprises too lots also ! Also enjoy Victoria Holiday Weekend too and also nice seeing weather get nicer there too ! But got throw in Brent have you had cut grass first cut yet and last Friday was my first cut of season and boy was thick cut also tall especially ditches and think last winter season was lots water plus salt and sand mix help out Lol!
The old '51 Ford truck is looking great and coming together fast. You keep knocking out these little jobs left and right, making it look so easy when it's not. Boy, Pablo really likes riding in the Jeep doesn't he, throwing you kisses and stuff. Another great tutorial video on building cars and trucks. Take care my friend.
Great progress. You make all your hard work look easy! Im learning. I have a 49 chevy 5 window,an s10 frame and an LS in the works. I know what i want to do. Should be fun. Have to watch in short pieces, wife is making me work. In my shop. 🤣25-1/4 to 52-1/4.tape was up side down.
Great to see the old truck moving under it's own power. Almost there. The clip of you and Pablo in the Jeep reminds of a trip I took with some friends of mine in mid-60s Chev convertible with a St. Bernard sitting in the front seat, top down and 3 of us across the back seat. It was a slobberfest!! Be safe and stay well.
It looks like I'm about a year late from watching this and seeing all the other comments but I really love this video I like this man he is just so cool
Not bad for a fiction repair daily Ford and I'd like to see you do a real truck a 1953 Chevy short bed stepside with a big block 454 but you do one hell of a job on there I love what you do
As always Brent another great video man ,steering, side steps ,rads ,driveshaft awesome work ,I wouldn't mine having that truck , just dreaming, thanks man .
Awesome build here Brent , I had my eye on a Merc at my cousins farm it had some bullet hole Patina etc , doing a clip on it would be very cool so many ideas , no room , must get square footage to co operate
Yeah that turned out really good. I haven't been able to watch your videos here in Ontario where I am. The power's been out since Saturday and we just got it back on tonight so I'm just playing catch up and all the videos. 👍👍♥️🇨🇦🐕
Looking like a driver Brett, great job as usuall,u just go with the flow as they say..lol.cant beleive how plabo luvs riding withe the wind in his face.lookin like a cruzin.pup an best buddy a guy could ask for..lol..tks for another great video.as usuall next ,we will be waiting. Later
Your motivation and your stamina sure do compliment your skills. Nary a one of which I possess. But it is sure fun to watch you build rides that anyone would be proud to own. And I don't even like that style of truck. Unless of course the roof was severely chopped and the nose tips of the front fenders clipped. As usual, thanks so much for including us in your passion.
Great to watch and glad you show its not all about buying new parts for every thing. Make use of what you got. Loved Pablo and the jeep ride. green grass is better than snow for back ground
Thank you Bret for what you do and who you are. You add so much to other peoples lives. Love what you do!
Pablo looked very happy cruising in the Jeep. I am sure he is saying (in his head) "I'm King of the World"!
My thought exactly!
I 2nd that motion!😀
My goodness that country is flat,a person can see a rain or storm coming miles away,ole Pablo is loving that jeep ride isn't he,Thankyou for the video,i learn something new or a new way to do something in a lot of your videos.
I wish auto shop was this cool. No BS shop. Thanks Brent
The Green White North steering to the best channel on here 👍☃️ ☝️
"Ignorance is bliss." You can be bit in the butt and not know it. Wow, what a great sound. The truck looks GREAT!
You’re killing me
“I don’t know judging by the chunks in the pan it’s not good”🤣
damn that's a beautiful build. i can't believe you have the time to do all this and edit so well.
Great episode! BONUS?! Seeing THE JEEP on the road!!! So happy to see that rig get some road and video time! Pablo approves!!!
Pedro is one cool dude. I wish I had a laid back dog, Brent is a lucky guy.
some funky music too
Thanks Brent. It looks like a farm truck, sounds like a hotrod and runs smooth as a cat walking on a sheet of glass. I enjoyed every “episode” of this build. Can’t wait to see it completed.
I never get tired of watching you create something cool from scratch. Thanks!
One sweet ride.
Hi Brent. I have to admire how you can laugh when the drive shaft measurements are out . When it goes wrong for me there’s a lot of bad language. But of course we’re on a family show . She’s coming along looking fine .👍🇨🇦🚘
Steering wobbled together, one man front clip without bolts, headlights signals action, running boards boarded, driveshaft 25 er 52 spun n welded her up, radiator steamed n ready to cook, drive'n forward n back again n again n again, practice makes perfect just ask Pablo.
It's one of those trucks you could chum around town all day in 😉 Lookin' sweet Brent!!
Your videos are the part of my day thanks.
Pablo looks so happy lol riding in the jeep and i never seen a comment about the old cabover chevy if you have one or know someone who does just shout out on ur video so i know to look at comments lol love everything you do man keep it up pablo will at least be happy he keeps his job as quality control
Yeah I don't have any Chevy cab overs.
Cool classic with that boss look, great video thanks once again. Pablo and Buddy on the patrol!
Happy Sunday Brent. Thanks for another great video!🐾🍺
You doing it buddy, just check em off. Wacko a Mole! Looking forward to the Drone footage on that one too. Dennis
More nice work there Brett, maybe next vid we go driving. 🇦🇺🇦🇺👍👍
Thank you, Brent, enjoyed it. Ronnie.
Your shop is a piece of heaven and reminds me of my Motörhead days. Really enjoy your work.
I really like this truck! The owner should be super happy.
Thank you Halfass Kustoms
I like the fitment of the project truck, and I'll catch ya on the next one
The old ford is looking awesome and sounding good 👍👍
Pablo in the Jeep with the windshield down, ....that's a happy dog! You make modifying a drive shaft look easy. Keep up the good work 👍
Always enjoy your videos love the end when you are cruising with the pup and gets you with his slobber
When you get on a roll you sure can get a lot of work done...
You’re real close now!!! Thanks John from Arizona
Loving the build and the blues music, who’s doing that picking Brent,
You'll have to check the description in the video I listed all the artists and their songs there
Bret it's going to be a cool truck. I like the way you tell how you are doing everything.
Man that is coming along fast. Great job
Pablo loves to ride! digging the build good job man!
Benefits of the bike ride, bugs in the teeth but four wheels, or training wheels for us old guys, no reference to you Brent. It looks really good. Aluminum is one tuff cookie to get onto but the guys who do it make it look so easy and nice as well. One thing for sure, cleanliness is next to god when doing it. So with that, winter is only three months away... lets hope the water thaws out in the shop! I guess you could burn some old tires over the line to help heat the ground ... i done that once.. heated the ground about a foot if I was generous.
I love the blues, l hope that you do too.
Glenn Campbell
Not that you ever have time but IF you are going through a wrecking yard, wander the foreign section esp the German cars, many have hose fittings that have a smaller port running off them (sort of like regular plumbing fittings going to test ports), some are even slightly angled to help move hose over that bit, anyway, should be able to run the cross over feed to that, saves any welding and reduces total fittings used.
Guessing short filler rod gets a little warm on the fingers? Ha, ha
I definitely find this truck to be a beauty as much as any other Brent is building.
Looks Great Brent
Great video again. You da Man. Your no doubt one of the best working on anything. And you prove it every day. Thank you Brent for sharing!
Wow! Wow-wow-wow-wow-wow. F-a-s-t !-!-! Instant car. As always, thanks for the amazing work and interesting content.
Great progress. Almost done. You're the guy who has taken the mystery out of so many things in a custom build, IE; shortening the drive shaft. I've done engine swaps (not chassis) but never knew how to address all the other components of the chassis. Thanks for the education. Hi Pablo ! (He's a horse in that Jeep!). 👍😎🍺
I enjoy watching your videos so much! Keep up the good content
The truck is coming along nicely 👍👍🇨🇱
These video's just get better . Very professional .
Have you thought about wearing a head cam ?
one of my go to first video channels when im needing to chill . Great work + good tunes
This one is going so smooth when you don't chop the top! Great job. Like what you do. Thanks
It's got to drive good stop good run good
I think you got all the basic covered here Brent you're badass Rock on.
This build was in and out and driven,good job on the build you make everything look easy.You are the best true blue collar hotrod builder.
Congrats Brent on almost getting her done. a few things left to do, and take a boot down the road.
It was great to see Cool Pablo taken a boot with u in the Jeep. lv ur crazy videos.
I love those big finder trucks.
Hey Brent, nice progress on the 51, looking good. I would be interested in what happened to the Chev. Anyway, great program as always. Take care my friend 👍
Another one looks good man
I love this truck, I had a 1952 F1 with a flathead.. Great truck still sorry I sold it 37 years ago.!
My 49 Chevy truck, I used a set of 53 Chevy turning signal lights ! I got the sockets from my local Napa store for my 1157 lamps.🤗🤗🤗🤗
She's going to look sweet rolling down the road!
Great is this. It sounds really well! Turn key reliability with cool looks. Perfect.
Just sooo awesome Bret...
Great ride with Pablo...👍😎
And now the short list of all the small things that need to make it a finished truck. Nice one
Excellent video Brent :) also wiin for sure also glad your teaching experience your skills new everytime and get surprises too lots also ! Also enjoy Victoria Holiday Weekend too and also nice seeing weather get nicer there too ! But got throw in Brent have you had cut grass first cut yet and last Friday was my first cut of season and boy was thick cut also tall especially ditches and think last winter season was lots water plus salt and sand mix help out Lol!
Thanks for sharing 👍😀
Doing a great job! Really enjoy watching your videos. Love how you laugh off problems and just continue building.
Beautiful job ! Lots of various talents employed to get there !
The old '51 Ford truck is looking great and coming together fast. You keep knocking out these little jobs left and right, making it look so easy when it's not. Boy, Pablo really likes riding in the Jeep doesn't he, throwing you kisses and stuff. Another great tutorial video on building cars and trucks. Take care my friend.
Great progress. You make all your hard work look easy! Im learning. I have a 49 chevy 5 window,an s10 frame and an LS in the works. I know what i want to do. Should be fun. Have to watch in short pieces, wife is making me work. In my shop.
🤣25-1/4 to 52-1/4.tape was up side down.
Great video glad you posted keep them coming thanks
Minty !
Thank You for sharing your video, and letting us hang out .
Later ...
Nice job 👍 so many great tips 😎 this build just keeps getting better 🍺🍺
Looking great man that aluminum tube was prolly to dirty on the inside but great fix !
Thanks for the great video Brent.Going to be a great driver when done.
Brent you can build a awesome ride.
It's coming together very well not long and it will be on the road, great job, all the best to you and your loved ones
Haha...looks like the jeep is Pablos favorite ride. looks like hes living his best life
Great to see the old truck moving under it's own power. Almost there. The clip of you and Pablo in the Jeep reminds of a trip I took with some friends of mine in mid-60s Chev convertible with a St. Bernard sitting in the front seat, top down and 3 of us across the back seat. It was a slobberfest!! Be safe and stay well.
It looks like I'm about a year late from watching this and seeing all the other comments but I really love this video I like this man he is just so cool
Nice job Brent , looking good for sure ..
For those drive lines that taper down on the ends. Try using two pieces of long angle iron to hold it straight with large hose clamps.
Love the build.
Not bad for a fiction repair daily Ford and I'd like to see you do a real truck a 1953 Chevy short bed stepside with a big block 454 but you do one hell of a job on there I love what you do
Awesome job as usual Bret definitely my favorite channel for sure
As always Brent another great video man ,steering, side steps ,rads ,driveshaft awesome work ,I wouldn't mine having that truck , just dreaming, thanks man .
Everything is easy to follow, but would like to see what is involved in unlocking the ecm and reprogramming. Great videos!
I use hp tuners fir that.
Nice truck. Good job.
Awesome build here Brent , I had my eye on a Merc at my cousins farm
it had some bullet hole Patina etc , doing a clip on it would be very cool
so many ideas , no room , must get square footage to co operate
You are one talented and gifted man. Really enjoy this build.
CONGRATULATIONS!!!! YOU HAVE A TOTALLY AWESOME DAILY DRIVER!!! THANKS FOR SHARING AND I LEARNED SO MUCH!!!!
Yeah that turned out really good. I haven't been able to watch your videos here in Ontario where I am. The power's been out since Saturday and we just got it back on tonight so I'm just playing catch up and all the videos. 👍👍♥️🇨🇦🐕
This very neat, enjoyed this build!
Looking like a driver Brett, great job as usuall,u just go with the flow as they say..lol.cant beleive how plabo luvs riding withe the wind in his face.lookin like a cruzin.pup an best buddy a guy could ask for..lol..tks for another great video.as usuall next ,we will be waiting. Later
Your motivation and your stamina sure do compliment your skills. Nary a one of which I possess. But it is sure fun to watch you build rides that anyone would be proud to own. And I don't even like that style of truck. Unless of course the roof was severely chopped and the nose tips of the front fenders clipped.
As usual, thanks so much for including us in your passion.
Great truck project!
Great to watch and glad you show its not all about buying new parts for every thing. Make use of what you got. Loved Pablo and the jeep ride. green grass is better than snow for back ground
I love early ford trucks learnt a lot from this video thanks Brent 🇦🇺👍
I've always liked the look of them Ford trucks but man, I'm luvin what u done to this. This build keep calling my name but I'm not the owner.
Watching you remove and install that front sheetmetal.........all I could think was, it's nice not to have to worry about scratching the paint. LOL
cool getting another one close to out the door well done sir Brent great video thank you
You always amaze me with how fast you can build a truck Brent! Nice work as always! Lookin' forward to the next project!
Wire brush for cleaning before welding should be copper or stainless for all Aluminum welding. Also everything must be super clean.
👍👍