I would love a sticker for my D4. I never expected to find such a great mix of fun and engineering when I bought my 2012 a couple of weeks back. I love the thing. You make me feel less alone! Chris.
Hello Chris, can you send me an email please?🙏I can't put any email, paypal, or other information here in the comment section, unfortunately. 👍🙋♀️Vera
@@Vera_and_Christian Hello Vera, I did send you a reply with my address etc. Did you see it? I am desperate to have a sticker (even in LR3 format!) , for my disco 4. Where it would be proudly displayed. (even if it does mean thattthe most informative plus hilarious British landrover D3/4 channel is German..). Sorry Jay Tee but you have no vera and I didn't see a lathe yet....All the VERY best, Chris.
Just caught up on this video, great idea for mounting stuff. I have a project suggestion - move the cable of the diag device to the bottom - you could print a new back cover and run the stripped cable inside to come out of the bottom.
👍 But we have gotten a used GAP tool ever since. I still have the icarsoft in my car stored underneath the rear seats, just in case (Philipp knows how to use it, I don't 😅) 🙋♀️Vera
All the way down in Africa... South Africa, I really enjoy you guys, I have had land rovers my whole life, i have had the discovery 3 for 3 years now... It is amazing, love your videos.. And I definitely want a sticker!
Sorry for comment a year later but have only recently caught you on RUclips and are amazed by your attention to detail , not been speechless many times in my life but with you guys it seems to be every time I watch your videos and I am even looking at a discovery for my next car an older one because can’t afford new prices, is there a model that you can put me the correct direction or advise which model to avoid, and I’m making you two honorary British for your British sense of humour.
So you have to watch these videos and then decide for yourself ruclips.net/video/chsGDZ3pZUY/видео.html , ruclips.net/video/fy_0ym793-8/видео.html , ruclips.net/video/9NrrTLJqm-Q/видео.html , ruclips.net/video/zDqd6mmz0l8/видео.htmlWatch them, really. And then go for the best maintained vehicle you can afford. And be sure to know that you either are able to fix it yourself, or have the spare change in your pocket to have it fixed.It is a commitment, but if you are commited and find a well kept, and loved Discovery, you'r going to have a great car and you are going to love it yourself. But first, you really need to know what you are getting into. 😃👍🙋♀️Vera
I just recently started following your channel and subscribe to it and it’s amazingly informative.. I am in Namibia and I am getting my discovery 3 in 2 days … thank you for your helpful advices on dealing with LR..
Awesome idea to use the aircraft channel on the dashboard. I do not know how well the adhesive will work in the Arizona sun when the temperature hits 150 degrees F inside the vehicle during the summer months. Those mounts are just like everything else that you engineer , perfection.
The plastic I used is no good in the sun. I would have to use ABS but this is more difficult to print. Luckily it did not get hot this year. The adhesive actually still works but again, we see nothing above 95 around here and a bit more in the car. Christian
Great video. Accessories always an issue. I am from Africa and use an LR4 and have driven from cap to Nairobi and back. Mods are essential. Thanks for a great video with such an easy going attitude
I’ve become absolutely hooked on your videos! I’m currently off work with an injury, and the majority of my recovery time has been spent watching your LR vids and planning how to implement them on mine 👌🏽 Excellent work.. would definitely love a sticker, but imagine they are all gone.
Looks fab. The only thing I would add to the clamps is some rubber where the clamps touch the phone this will stop the phones etc from getting scratched or moving as I think plastic to plastic might move due to the vibration of the car. Only a thought. Keep up the good work.
great vid.and you always make me laugh.great to see someone working on the d3.very informative.i no longer have mine.miss it every day.best car i have had.thanks again.cheers greg on oz
Hi Christian and Vera, Bindi and David here in Adelaide Australia. We love watching you both , very useful info for our LandRover . We would LOVE one of your stickers to put on our car .xx Bindi & David
Wow you guys are awesome. I also have a discovery three here in the US and I love this thing. Keep up the great work. Also I would love one of those stickers!!!
You guys are amazing and great job on the content. I'm shopping for a LR4 in Germany 🇩🇪 and hopefully soon will be a proud owner of one. The wife and kids are excited to make adventures and memories. Lots of greetings from Sarajevo!
You guys are great! I really enjoy your channel! You are growing and developing the channel so quickly and I really look forward to the more frequent videos. I must have missed the one with the new stickers though... But I would love to display your channel sticker on my LR3 (Discovery 3) here in South Africa.
You two are pretty cool people! I just change the oil with my daughter in the LR2 today and I started to work on a camping shelf project for the trunk. You inspire me. Keep it up and Cheers from Canada. ...Oh, I also started to think about a LR4 lately, not sure why ;o)
Ideas for the future, is a remap out of bounds? What about the dreaded Ford sourced tailgate latch although plenty of others have RUclips videos on it? (I repaired mine with part of an Allen key and a small clamp, also a pull wire in case it fails again!) I enjoy your videos, take us on a tour of your locality sometime, thanks. (In the LR3 of course!)
👍 We adressed the dreaded tailgate problem in our video "15 things you may not know....", I'll leave the link here ruclips.net/video/cQ0zStW7tW8/видео.html (at least I thing we do 😳) It failed on us also and I believe Christian explains what he did to solve the problem. It's also one where we drive around and stop somewhere to film the video. 🙋♀️ Vera
Been watching your channel for quite some time now! You guys are fantastic, and also guided me into buying my very own Land Rover. It is truly a "relation-ship", this vehicle! Would love to display a sticker from you on my car! Cheers, and happy overlanding.
Hello Georgi, we still have stickers, and a patch also, but we have to sell them nowadays. The request is so great that it would be too expensive for us to keep giving them away for free. 🙋♀️Vera
That is a very neat phone holder, I'm off to Thingyverse! Great job with the usual entertaining dialogue. I can't imagine why you would get a thumbs down from anyone.
You guys rock! I literally tell my GF all the things I want to do to our disco 3 and the majority of the ideas are based on your channel! If would be my honor to have an LR time sticker on my disco. :) first time for Mexico?
Very nice idea. I really like the self-adjustable phone holder. Bit of a pain the OBD scanner has that cable out the top. I wouldn't be surprised if we see that modified after the next long trip. :) Also nice to see a D3 without cracks in the dash. I've never seen that before. :) Aus sun cooks ours.
Really nice design! Next time, do a bit research on heat inserts. Much better than woodscrews. Also, do realize temperatures in cars can get very high. Most 3d printed parts in cars develop issues due to this (bluntly spoken, they tend to melt..). Be prepared and have some spares...
What a great idea! Thanks for sharing, we really enjoy the two of you and your channel. Now we just hope your stickers will arrive to go our Disco3 in time for the summers travels around Denmark 🇩🇰...🤞🏻
Man... this is just incredible!! I just saw someone mounting auch thing to a wrangler! But for a Discovery its just unique! Vera... did I mention that such a sticker would perfectly fit on my D4 as well!
Brilliant! Can I suggest if you are making a 3D printing file available for the (left) instrument cluster end of the airlines rail that you also flip/mirror the object print file, for people who have right hand drive Discoverys. Have a LHD version and a RHD version. Thanks.
Lovely work. Well thought out and engineered. You could sell those easily. I’d love a sticker if they are available. Great video as always. Best wishes from Wales
Hello Christian computer thing you used to check the faults on the LR3 could you not swap that over with your phone so the cable is not in your Line of Sight. Now you have done that in your vehicle vera may want it in the Freelander as wellvery nice job 👍 staysafe looking forward to the next video. Ralph
Christian, Vera, I can't find anodized black airline rail (domed profile) in the UK anywhere. I don't suppose you have a link from Germany? Great chanel BTW, vielen dank.
We got them here www.oryxsolutions.de/fahrzeugtechnik/zurrschienen-zubehoer/2379/airlineschiene-schwarz-halbrund-gebohrt-2-meter , shipping was 27€ 🙋♀️ Vera
Vera, where did you get the cell phone mount that fits onto the Garmin ball mount? Did he design it from scratch? I could never design something that complicated. Also what is the orange OBDII thing on the left used for?
Yes, you can find those designs for free on thingiverse. The OBDII is our diagnostic tool, we have it always hooked up, just for fun. Christian likes to play around with it. 👍🙋♀️ Vera
Hiya don’t suppose you have a video on egr valves I’ve been looking and they saying battery out air con de gassed fuel lines of seems a lot for 5 bolts lol
am I too late for the party??? I would love to have your sticker on my LR3. I bought it almost 4 months ago and it's been a love/hate relationship. Lots to fix :( but also good bonding experience with my friends and family driving through the dunes and mountains. A big hug from Dubai. Lastly, you should open an online store, I'll be happy to support buying some merch
Christian designed a Camera mount for my camera, and printed it with his, back then, brand new toy😅. It‘s the best. Here is the link to the videoruclips.net/video/76LCD-4DvEs/видео.html🙋♀️Vera
Wonderful video. I’ve been following since the time I got my 08 discovery last year. How do I get hold of your stickers? I’d love to proudly show it off in my Rover. Cheers.
I used PLA but will try ABS next because my Gadgets may melt in summer 😬. The carbon fiber stuff is a good idea. Hope my cheap printer can handle it. 👍👍
@@Vera_and_Christian petg carbon fiber is easy to print but 100% stronger than pla also not to bad in sun abs needs an enclosure to keep the heat in and it warps if not stuck to the bed
Yes I don‘t want any holes in my dash. And we actually do not use it unfortunately. We do film a lot and if we mount stuff, it‘s just a distraction and obstruction. 👍🙋♀️
Greetings from Scotland. Love the video and what you have done. I don't suppose you would be open to selling some mounts? I don't have access to a printer. Would love to buy one of your stickers for my Land Rover too.
Hello from your neighbours in Luxembourg :) . Very cool design and mounts. . I hope in a few months I will join the LR community (I ordered a Defender that I plan to use for holidays/camping trips to replace a Hilux - I guess that is called overloading now. ). I also have a couple of 3d printers and I learned a bit of 3d design with Fusion360. I have a question : Where do you find the springs you used for the mounts ? - is there a site or a shop in Germany where you can order them ? I needed a few for my projects, and they were a pain to find, I had to disassemble some old locks and pens...:) The defender has some bars already that I plan to use, but I might "borrow" your design for the backplates and adapt it You guys are great. Thank you.
😂So cool that you get the new Defender 👍. We have a sortment of springs like that one from Amazon www.amazon.de/dp/B004CRC0SW/?coliid=I3SN47ZWLQ5DZL&colid=3DR2TINR8PYWV&psc=1&ref_=lv_ov_lig_dp_it at home, but we got ours from a hardware store. I just copied you the link so you can picture what we have, there are cheaper ones on Amazon. All our designs are on thingiverse and we are really happy when people use them. 🙋♀️ Vera
Hello from Downunder. I have only just seen this. It is genius. I love what you two get up to and this mounting rail is just brilliant. Also i would very much appreciate a sticker of your and i will proudly mount it on my D4. I'll send you my address if you can send me one. Keep up the good work.
Hello Robert, when you send me an email, I can forward you the payment info and you can send me your adress. I can't share that info, even the email adress, here in the comment section. You'll find my email in the channel info/about tab. 🙋♀️Vera
Hi chris ...How you doing.. I have issue with range rover transfercase ..after changing the transmetion fluid driving for three days a 3 messge pop up 1. Transmission Range Change Not Available 2. System Fault Special Programs Not Available 3. Special Programs Off I have checked tc module found little oxidation ...clean but still same ...what you think the reason...did we pinch wire when we change tranetion oil coz need lift gear .. Or TC module issue or need just reprograming for TC .. THANKS
@@Vera_and_Christian Hi Chris Thanks for your reply just quick update ...went to pull the code found the TCM below codes lost commucation with TC pcm -actuator issue code -Hi voltage issue code -Clutch pack issue code The shop suggest to reclibrate the TC module then magic happen its working now after clibration procedure I think lost program coz we diconnect battery and jump start after the fluid change .Also all terrain control and shiftting to low gear are ok.. Only issue now there is noise from TC when car moving the low gear like somthing dragging and banging inside ..shop informed to open the TC to check I might go with used one ..do you think is clutch pack issue or chain Thanks
Hello, can I ask you for information? I decided to buy a diagnosis for my discovery4 2.7 manual. Do you use Icarsoft? Does your instrument carry out the service reset? Thank you teacher.
Based on your experience Which specific icarsoft LR reads the instantaneous values of the air mass sensors and fuel pump feed pressures. I ask you this because I have black smoke problems under acceleration. Before changing injectors or other uselessly, I would like to understand the real cause.Maybe some sensor . P.S the EGR valves plugged. They are a distant sad memory. Sorry for the poem.
It should give you a fault code. Google that then on Disco3.co.uk. Also check the intercooler hoses, if there is a hole, that will cause black smoke. There are three of them. 🙋♀️Vera
Hi Vera, Hi Christian... GREAT VIDEO AS ALWAYS... 👍🏻 Wait... you said you work too? 😳 I am shocked! How do you find time for all these projects and work? Just joking. I sent you guys an email already. Let me know if you still have a sticker available. Thanks for making the models available.
I genuinely never thought of using air line railings for putting gadgets on the dashboard... Now, im using a 20mm steel rod for my IPad and a gimbal for a dashcam phone... Its held in place also by a custom 3d printed piece bolted on to the dashboard
That was actually our plan to by using a rod. But Christian picked the oldest and ugliest piece of metal out of our storage. I just couldn't live with it 😅👍🙋♀️ Vera
Hello, I follow on Your channel from one year and You are amazing, keep making this videos 😊 If You have a one stickers free I would be proud to put it on my LR 3 too. Do You have Your printed accesories like that rail on dashboard to sell???
Please send me an email with your adress. We cannot sell our parts yet, we have to register a business first. But hopefully that is going to happen in 2021. 🙋♀️ Vera
Cleanest install i have ever seen in all vehicles. Genius idea.
Two very smart; funny and entertaing people ❤
Hi guys, I got a LR4 and love watching your videos.
Love you two! You guys are so much fun and your humor is hilarious!
I would love a sticker for my D4. I never expected to find such a great mix of fun and engineering when I bought my 2012 a couple of weeks back. I love the thing. You make me feel less alone! Chris.
Hello Chris, can you send me an email please?🙏I can't put any email, paypal, or other information here in the comment section, unfortunately. 👍🙋♀️Vera
@@Vera_and_Christian Hello Vera, I did send you a reply with my address etc. Did you see it? I am desperate to have a sticker (even in LR3 format!) , for my disco 4. Where it would be proudly displayed. (even if it does mean thattthe most informative plus hilarious British landrover D3/4 channel is German..). Sorry Jay Tee but you have no vera and I didn't see a lathe yet....All the VERY best, Chris.
Great video. I have my 4yr old saying “ it’s rover time “... ALL THE TIME!!!!!!!!!
😂💪👍🙋♀️ Vera
Another triumph for Vera! I guess Christian deserves some praise too.
😅👍💪🙋♀️ Vera
The dash rail is a genius idea! I need to make one of these 👍🏻
Just caught up on this video, great idea for mounting stuff. I have a project suggestion - move the cable of the diag device to the bottom - you could print a new back cover and run the stripped cable inside to come out of the bottom.
👍 But we have gotten a used GAP tool ever since. I still have the icarsoft in my car stored underneath the rear seats, just in case (Philipp knows how to use it, I don't 😅) 🙋♀️Vera
I would be proud to display your decal on my LR3!
Same!!!
I'll need your adress 👍🙋♀️ Vera
@Bob Cofer Got you covered already 👍🙋♀️ Vera
Absolutely amazing guys. When over landing, you end up using so many devices. Brilliant idea Vera.😇
All the way down in Africa... South Africa, I really enjoy you guys, I have had land rovers my whole life, i have had the discovery 3 for 3 years now... It is amazing, love your videos.. And I definitely want a sticker!
Email me your adress 👍🙋♀️ Vera
@@Vera_and_Christian your email is not working? What is your email address?
@@SilverSiaramLook here ruclips.net/user/ChristianMuthabout, you have to see which letters are CAPITAL letters. 👍🙋♀️ Vera
Sorry for comment a year later but have only recently caught you on RUclips and are amazed by your attention to detail , not been speechless many times in my life but with you guys it seems to be every time I watch your videos and I am even looking at a discovery for my next car an older one because can’t afford new prices, is there a model that you can put me the correct direction or advise which model to avoid, and I’m making you two honorary British for your British sense of humour.
So you have to watch these videos and then decide for yourself ruclips.net/video/chsGDZ3pZUY/видео.html , ruclips.net/video/fy_0ym793-8/видео.html , ruclips.net/video/9NrrTLJqm-Q/видео.html , ruclips.net/video/zDqd6mmz0l8/видео.htmlWatch them, really. And then go for the best maintained vehicle you can afford. And be sure to know that you either are able to fix it yourself, or have the spare change in your pocket to have it fixed.It is a commitment, but if you are commited and find a well kept, and loved Discovery, you'r going to have a great car and you are going to love it yourself. But first, you really need to know what you are getting into. 😃👍🙋♀️Vera
Wow. I am so impressed. Your enterprise is fantastic. Great job guys
I just recently started following your channel and subscribe to it and it’s amazingly informative.. I am in Namibia and I am getting my discovery 3 in 2 days … thank you for your helpful advices on dealing with LR..
Awesome idea to use the aircraft channel on the dashboard. I do not know how well the adhesive will work in the Arizona sun when the temperature hits 150 degrees F inside the vehicle during the summer months. Those mounts are just like everything else that you engineer , perfection.
The plastic I used is no good in the sun. I would have to use ABS but this is more difficult to print. Luckily it did not get hot this year. The adhesive actually still works but again, we see nothing above 95 around here and a bit more in the car. Christian
I hit the like button as soon as I saw you introduction, you are both such a good team together. Greetings from Australia 👍
👌💪👍😊🙋♀️ Vera
Christian & Vera - your passion, attention to detail, perfection and love for all things Land Rover is superb!! Thanks for the great show!
Great video. Accessories always an issue. I am from Africa and use an LR4 and have driven from cap to Nairobi and back. Mods are essential. Thanks for a great video with such an easy going attitude
I’ve become absolutely hooked on your videos!
I’m currently off work with an injury, and the majority of my recovery time has been spent watching your LR vids and planning how to implement them on mine 👌🏽
Excellent work.. would definitely love a sticker, but imagine they are all gone.
You need to send me an email with your adress, email can be found in the channel info. 😃👍🙋♀️ Vera
@@Vera_and_Christian Thank yoouuuu
Very good. Your Discovery looks like the cockpit of an airplane 😁 A hug from Portugal
Looks fab. The only thing I would add to the clamps is some rubber where the clamps touch the phone this will stop the phones etc from getting scratched or moving as I think plastic to plastic might move due to the vibration of the car. Only a thought. Keep up the good work.
Thanks 😃👍🙋♀️ Vera
Your lr3 has more gadgets than a Swiss army nife very cool
Hmmm. I guess you are right. Looks a bit like a space x mission control center...
great vid.and you always make me laugh.great to see someone working on the d3.very informative.i no longer have mine.miss it every day.best car i have had.thanks again.cheers greg on oz
Ingenious! You've printed a cool device there!
Hi Christian and Vera, Bindi and David here in Adelaide Australia. We love watching you both , very useful info for our LandRover . We would LOVE one of your stickers to put on our car .xx Bindi & David
👍🙋♀️ Email me your adress please.
Not only do I enjoy your videos but I’m also very impressed with your ideas and the finished products 👍🏻👍🏻
Very impressive construction and installation.
I envy (in a good way), we also have LR3 and we learn a lot from you. You are the best! Good wishes from Latvia!
Thanks, same to you 😃👍🙋♀️ Vera
Wow you guys are awesome. I also have a discovery three here in the US and I love this thing. Keep up the great work. Also I would love one of those stickers!!!
Send me an email with your adress, you find it in the About Page 🙋♀️ Vera
You guys are amazing and great job on the content. I'm shopping for a LR4 in Germany 🇩🇪 and hopefully soon will be a proud owner of one. The wife and kids are excited to make adventures and memories. Lots of greetings from Sarajevo!
😀👍 You are going to love it, 🙋♀️ Vera
You guys are great! I really enjoy your channel! You are growing and developing the channel so quickly and I really look forward to the more frequent videos. I must have missed the one with the new stickers though... But I would love to display your channel sticker on my LR3 (Discovery 3) here in South Africa.
👍 send me an email with your adress and I'll be happy to mail you a sticker 🙋♀️ Vera
I'm riding Discovery 3 and it's a great item.
3M adhesive primer is a good recommendation
You two are pretty cool people! I just change the oil with my daughter in the LR2 today and I started to work on a camping shelf project for the trunk. You inspire me. Keep it up and Cheers from Canada. ...Oh, I also started to think about a LR4 lately, not sure why ;o)
Ideas for the future, is a remap out of bounds? What about the dreaded Ford sourced tailgate latch although plenty of others have RUclips videos on it? (I repaired mine with part of an Allen key and a small clamp, also a pull wire in case it fails again!) I enjoy your videos, take us on a tour of your locality sometime, thanks. (In the LR3 of course!)
👍 We adressed the dreaded tailgate problem in our video "15 things you may not know....", I'll leave the link here ruclips.net/video/cQ0zStW7tW8/видео.html (at least I thing we do 😳) It failed on us also and I believe Christian explains what he did to solve the problem. It's also one where we drive around and stop somewhere to film the video. 🙋♀️ Vera
Absolutely brills great one Vera nice print Christian 😀
Brilliant guys ! Really happy for you ! Remind me so much of my parents :)
that looks awesome .... vera your a genius
Awesome tips and videos. Many thanks. From Cape Town South Africa and would display your decal proudly on my disco 3.
Did you already send me an email with your adress? Then yours will be my first letter to Africa 👍😃🙋♀️ Vera
Been watching your channel for quite some time now! You guys are fantastic, and also guided me into buying my very own Land Rover. It is truly a "relation-ship", this vehicle! Would love to display a sticker from you on my car! Cheers, and happy overlanding.
😃🙋♀️ Send me an email with your adress 👍
Excellent idea, keep up the videos. I own a Freelander1 .
Me too 😃👍 and it doesn't break as much,so only two videos are dedicated to the Freelander 🙋♀️ Vera
Great designs! I just wish I had a Disco 3 to with them!
Have you had a chance to test the durability of these mounts in an off-road situation?
👍 We have not had any breaks or ratteling. 🙋♀️ Vera
What a genius idea Vera! Great skills from Christian. Once again you two great vid ;)
👍😃🙋♀️ Vera
All well done, I'm sorry I've missed the stickers.
Hello Georgi, we still have stickers, and a patch also, but we have to sell them nowadays. The request is so great that it would be too expensive for us to keep giving them away for free. 🙋♀️Vera
Excellent job , All you need now is to print a cable tidy.
I had that idea too, I called it a cable duct, but he cut it out of the video. 😂👍🙋♀️ Vera
@@Vera_and_Christian Love LR Time look forward and enjoy every video , well done to you both .👍
@@rogerturk6223 😊🙏🙋♀️ Vera
Another lovely video. Best wishes from Canada
That is a very neat phone holder, I'm off to Thingyverse! Great job with the usual entertaining dialogue. I can't imagine why you would get a thumbs down from anyone.
👍😃🙋♀️ Vera
You guys rock!
I literally tell my GF all the things I want to do to our disco 3 and the majority of the ideas are based on your channel!
If would be my honor to have an LR time sticker on my disco. :) first time for Mexico?
👍Yep, that would be the first one, just email me your adress and I'll be happy to send you one. 🙋♀️ Vera
Excellent ! Loved it ! 10/10
Very nice idea. I really like the self-adjustable phone holder. Bit of a pain the OBD scanner has that cable out the top. I wouldn't be surprised if we see that modified after the next long trip. :)
Also nice to see a D3 without cracks in the dash. I've never seen that before. :) Aus sun cooks ours.
I didn't even know that can happen, just got a long lecture from Christian how the sun can ruin your car 😃 👍🙋♀️ Vera
Really nice design! Next time, do a bit research on heat inserts. Much better than woodscrews. Also, do realize temperatures in cars can get very high. Most 3d printed parts in cars develop issues due to this (bluntly spoken, they tend to melt..). Be prepared and have some spares...
You both are so genius! The ideas are so good! Maybe consider starting a business with LR-TIME accessories. Best Regards from Belgium, David
Hopefully that is going to happen in the future 😃👍🙋♀️ Vera
Hello both, love your videos, they are very helpful, could you tell me what touch screen radio is that, many thanks,
Here is our video to that install and review.👍 ruclips.net/video/hGmF5yhUvG4/видео.html Links are in the description. 🙋♀️ Vera
What a great idea! Thanks for sharing, we really enjoy the two of you and your channel.
Now we just hope your stickers will arrive to go our Disco3 in time for the summers travels around Denmark 🇩🇰...🤞🏻
I already send them out a couple of days ago. 🙋♀️ Vera
@@Vera_and_Christian you’re the best!🙏🏻
Brilliant you two!
I’ll wait for the LR Time patches to I can attach it to my headliner
Me too, hope Christian oders them soon 👍🙋♀️ Vera
Man... this is just incredible!! I just saw someone mounting auch thing to a wrangler! But for a Discovery its just unique! Vera... did I mention that such a sticker would perfectly fit on my D4 as well!
👍 Send me your adress and I'll get one to you 🙋♀️ Vera
@@Vera_and_Christian where do i find your Email address?🤷♂️
@@discoverland on home page mate in about
Brilliant Now I need a 3D printer. Also thank you so much for the sticker it is now on my disco 3.
Would you please send me a picture of your car sometime 🙏🙋♀️ Vera
@@Vera_and_Christian Hi Vera. Yes of course it would be a pleasure. Where shall I send them. Mo.
@@MrBadtoad1 To my email adress please. You find it here ruclips.net/user/ChristianMuthabout 🙏🙋♀️ Vera
Brilliant! Can I suggest if you are making a 3D printing file available for the (left) instrument cluster end of the airlines rail that you also flip/mirror the object print file, for people who have right hand drive Discoverys.
Have a LHD version and a RHD version.
Thanks.
😅 yes of course, we didn't even think of that. Thank you for pointing that out. 😃👍🙋♀️ Vera
Nice one, you should market these. 👍
😃👍🙋♀️ Vera
Very practical. Love the custom 3D prints. Thumbs up from me 👍
👍😃🙋♀️ Vera
Lovely work. Well thought out and engineered. You could sell those easily. I’d love a sticker if they are available. Great video as always. Best wishes from Wales
👍 Send me your adress and I'll get one for you 🙋♀️
@@robgreenhill1426 i wouldnt put address on era there is an email on there about on home page
I got your email 👍🙋♀️ Vera
Hello Christian computer thing you used to check the faults on the LR3 could you not swap that over with your phone so the cable is not in your Line of Sight. Now you have done that in your vehicle vera may want it in the Freelander as wellvery nice job 👍 staysafe looking forward to the next video.
Ralph
The phone mount is for my phone (when I am the passenger), and please don't put the obdii tool close to me, that is too much stress😂 🙋♀️ Vera
Fantastic......very good job.
Start marketing all this kit then you can retire great video guys
Christian, Vera, I can't find anodized black airline rail (domed profile) in the UK anywhere. I don't suppose you have a link from Germany? Great chanel BTW, vielen dank.
We got them here www.oryxsolutions.de/fahrzeugtechnik/zurrschienen-zubehoer/2379/airlineschiene-schwarz-halbrund-gebohrt-2-meter , shipping was 27€ 🙋♀️ Vera
Hi guys. Love your videos. Have you anymore stickers?
Great idea
very good idea!
Another great idea and think you should be able to mount the GoPro there as well 👍🏻👍🏻. Could I be considered for one of your stickers please?
We completely forgot about the camera 😳, yeah that was actually the main reason to make that mount 😂👍🙋♀️ Vera
Vera, where did you get the cell phone mount that fits onto the Garmin ball mount? Did he design it from scratch? I could never design something that complicated. Also what is the orange OBDII thing on the left used for?
Yes, you can find those designs for free on thingiverse. The OBDII is our diagnostic tool, we have it always hooked up, just for fun. Christian likes to play around with it. 👍🙋♀️ Vera
Cant wait to print these:)
👍🙋♀️ Vera
Good Job Guys...another amazing video...I would be happy to to showcase one of your stickers if you have any left 😉
👍 Send me an email with your adress please 🙋♀️ Vera
Am I too late for a sticker? Love your channel, my wife and I really enjoy watching together.
When you email me your adress, I'll be happy to send you one. I have just a couple of stickers left. 😃👍🙋♀️ Vera
Hiya don’t suppose you have a video on egr valves I’ve been looking and they saying battery out air con de gassed fuel lines of seems a lot for 5 bolts lol
Another great project completed Christian & Vera ! I've been watching for sometime now and not sure if I missed it what year is your Discovery 3?
It’s a 2006 and we got it since 2015 😂😳👍
Bonjour...
Simplement genial...
😊👍🙋♀️ Vera
am I too late for the party??? I would love to have your sticker on my LR3. I bought it almost 4 months ago and it's been a love/hate relationship. Lots to fix :( but also good bonding experience with my friends and family driving through the dunes and mountains. A big hug from Dubai. Lastly, you should open an online store, I'll be happy to support buying some merch
Great idea. Please send me an email with your adress and I'll get to you. 🙋♀️ Vera
Brilliant 👍🏻
hi guys, what type of mounts are you using on glovebox door pls? and what were u using it for?
Thank you
Christian designed a Camera mount for my camera, and printed it with his, back then, brand new toy😅. It‘s the best. Here is the link to the videoruclips.net/video/76LCD-4DvEs/видео.html🙋♀️Vera
Wonderful video. I’ve been following since the time I got my 08 discovery last year. How do I get hold of your stickers? I’d love to proudly show it off in my Rover. Cheers.
You have to send me an email with your adress 🙋♀️👍 Vera
are you using ABS or PLA i found PETG carbon fiber very strong and dimensions good
I used PLA but will try ABS next because my Gadgets may melt in summer 😬. The carbon fiber stuff is a good idea. Hope my cheap printer can handle it. 👍👍
@@Vera_and_Christian petg carbon fiber is easy to print but 100% stronger than pla also not to bad in sun abs needs an enclosure to keep the heat in and it warps if not stuck to the bed
Would it be possible to use screws to fasten it on the dash ?
Yes I don‘t want any holes in my dash. And we actually do not use it unfortunately. We do film a lot and if we mount stuff, it‘s just a distraction and obstruction. 👍🙋♀️
@@Vera_and_Christian thank you very much for your answer! 😊
Top Idea!!👍👍
Greetings from Scotland. Love the video and what you have done. I don't suppose you would be open to selling some mounts? I don't have access to a printer. Would love to buy one of your stickers for my Land Rover too.
Send me your adress and I'll get you one 👍🙋♀️ Vera
Hello from your neighbours in Luxembourg :) . Very cool design and mounts. . I hope in a few months I will join the LR community (I ordered a Defender that I plan to use for holidays/camping trips to replace a Hilux - I guess that is called overloading now. ). I also have a couple of 3d printers and I learned a bit of 3d design with Fusion360. I have a question : Where do you find the springs you used for the mounts ? - is there a site or a shop in Germany where you can order them ? I needed a few for my projects, and they were a pain to find, I had to disassemble some old locks and pens...:)
The defender has some bars already that I plan to use, but I might "borrow" your design for the backplates and adapt it
You guys are great.
Thank you.
😂So cool that you get the new Defender 👍. We have a sortment of springs like that one from Amazon www.amazon.de/dp/B004CRC0SW/?coliid=I3SN47ZWLQ5DZL&colid=3DR2TINR8PYWV&psc=1&ref_=lv_ov_lig_dp_it at home, but we got ours from a hardware store. I just copied you the link so you can picture what we have, there are cheaper ones on Amazon. All our designs are on thingiverse and we are really happy when people use them. 🙋♀️ Vera
Hello from Downunder. I have only just seen this. It is genius. I love what you two get up to and this mounting rail is just brilliant. Also i would very much appreciate a sticker of your and i will proudly mount it on my D4. I'll send you my address if you can send me one. Keep up the good work.
Hello Robert, when you send me an email, I can forward you the payment info and you can send me your adress. I can't share that info, even the email adress, here in the comment section. You'll find my email in the channel info/about tab. 🙋♀️Vera
Hi what have you replaced the sat nav with?
We have a video about it here ruclips.net/video/hGmF5yhUvG4/видео.html and all the links are in the video description.👍🙋♀️ Vera
I’m in Africa (South Africa) and I’d love to have your sticker on my Disco 2.
Email me your adress please 🙋♀️ Vera
Email sent. Thank you Vera.
@@ryanhenry21👍 got it
you pair crack me up !!!!!
Hi chris ...How you doing..
I have issue with range rover transfercase ..after changing the transmetion fluid driving for three days a 3 messge pop up 1. Transmission Range Change Not Available
2. System Fault Special Programs Not Available
3. Special Programs Off
I have checked tc module found little oxidation ...clean but still same ...what you think the reason...did we pinch wire when we change tranetion oil coz need lift gear ..
Or TC module issue or need just reprograming for TC ..
THANKS
You need to check the faults with a diagnostic unit. Christian
@@Vera_and_Christian Hi Chris Thanks for your reply just quick update ...went to pull the code found the TCM below codes
lost commucation with TC pcm
-actuator issue code
-Hi voltage issue code
-Clutch pack issue code
The shop suggest to reclibrate the TC module then magic happen its working now after clibration procedure I think lost program coz we diconnect battery and jump start after the fluid change .Also all terrain control and shiftting to low gear are ok..
Only issue now there is noise from TC when car moving the low gear like somthing dragging and banging inside ..shop informed to open the TC to check I might go with used one ..do you think is clutch pack issue or chain
Thanks
i love these videos. i have a discovery 3 2007 manual with 2.7TDV6. i am from South africa. i wouldnt mind a sticker for the rear of my Disco
👍Email me your adress and I'll be happy to send you one. 🙋♀️ Vera
@@Vera_and_Christian
Where do i find your email address?
@@Holidaynet Look here 👍ruclips.net/user/ChristianMuthabout 🙋♀️ Vera
@@Vera_and_Christian
Email sent
Hello, can I ask you for information? I decided to buy a diagnosis for my discovery4 2.7 manual. Do you use Icarsoft? Does your instrument carry out the service reset? Thank you teacher.
Based on your experience Which specific icarsoft LR reads the instantaneous values of the air mass sensors and fuel pump feed pressures. I ask you this because I have black smoke problems under acceleration. Before changing injectors or other uselessly, I would like to understand the real cause.Maybe some sensor . P.S the EGR valves plugged. They are a distant sad memory. Sorry for the poem.
It should give you a fault code. Google that then on Disco3.co.uk. Also check the intercooler hoses, if there is a hole, that will cause black smoke. There are three of them. 🙋♀️Vera
@@Vera_and_Christian thank you so much Miss.Vera
"stupid pipe" 😂 neat idea Vera!
😅🙋♀️ Vera
Just brilliant 😀 - Do you guys continue to speak English after the video stops - You’re both so fluent it probably makes no difference 👍🏻👍🏻
😃 😊🙋♀️ Vera
No Spanish
I believe so
Hey ihr Dieburger, euer Englisch ist der Brüller ... wir sehen uns beim Disco-Treffen!
👍 Das wär mal was🙋♀️ Vera
Hi Vera, Hi Christian... GREAT VIDEO AS ALWAYS... 👍🏻
Wait... you said you work too? 😳 I am shocked! How do you find time for all these projects and work?
Just joking. I sent you guys an email already. Let me know if you still have a sticker available.
Thanks for making the models available.
👍 Send me your adress and I'll get you one. 🙋♀️ Vera
I genuinely never thought of using air line railings for putting gadgets on the dashboard... Now, im using a 20mm steel rod for my IPad and a gimbal for a dashcam phone... Its held in place also by a custom 3d printed piece bolted on to the dashboard
That was actually our plan to by using a rod. But Christian picked the oldest and ugliest piece of metal out of our storage. I just couldn't live with it 😅👍🙋♀️ Vera
@@Vera_and_Christian hahahahaa good for that, because using the air line railings looks absolutely better and doesnt waste a lot of room...
Hello, I follow on Your channel from one year and You are amazing, keep making this videos 😊
If You have a one stickers free I would be proud to put it on my LR 3 too.
Do You have Your printed accesories like that rail on dashboard to sell???
Please send me an email with your adress. We cannot sell our parts yet, we have to register a business first. But hopefully that is going to happen in 2021. 🙋♀️ Vera
@@Vera_and_Christian Great, so I am waiting for opening👍
Im verry interested by your sticker i will be proud of it
You have to send me an email with your adress 👍🙋♀️ Vera