Mini Sewing Machine Full Demo Video

Поделиться
HTML-код
  • Опубликовано: 14 янв 2025

Комментарии • 33

  • @anchitasrivastava02g
    @anchitasrivastava02g 3 месяца назад +2

    Best review and guidelines till date
    Bahut acche se samjhaya
    Thanks a lot

  • @sangitamishra9603
    @sangitamishra9603 2 месяца назад

    Thank you, you explained it very well, but in my machine, there is no stitching coming from both the top and bottom. The thread settings are correct, but I'm still facing a problem.

    • @akiara8424
      @akiara8424  2 месяца назад

      Practice while watching until you have put on the face line and the bottom line correctly, and the bottom line is evoked.

  • @_payal01
    @_payal01 Месяц назад +1

    Without electricity ni chlega kya?

  • @mohinmohin5210
    @mohinmohin5210 3 месяца назад

    How loge u have this machine???
    I thought i want to buy but some

    • @akiara8424
      @akiara8424  3 месяца назад

      You only need to use the Mini sewing machine for 20 minutes.

  • @renuagarwal636
    @renuagarwal636 3 месяца назад

    How to put back the bobin screw after filling

    • @akiara8424
      @akiara8424  3 месяца назад

      Please watch the entire video, and if you have any questions, you can ask on the number 7718954565
      ruclips.net/user/shortsEF77x77nSdM?si=YttzULG-jbWJbmXU

  • @pallavipawar8300
    @pallavipawar8300 День назад

    Bobin ka dhaga hi upar nahi ata bahot bar video dekh liya

  • @nashranashra9416
    @nashranashra9416 3 месяца назад

    How to put back bobin screw after filling

    • @akiara8424
      @akiara8424  3 месяца назад

      The process is shown in the video. Please watch it carefully and give it a try.

  • @kriyakabdi
    @kriyakabdi 3 месяца назад

    How much time will it charge

    • @akiara8424
      @akiara8424  3 месяца назад

      You don’t need to charge the Mini machine; you have to use it by connecting it to power

  • @MMnaC
    @MMnaC 3 месяца назад +1

    Why is my thread doesn't show up like that? 🙃 5:01

    • @ayshasithika2851
      @ayshasithika2851 2 месяца назад

      Yes...

    • @booklover930
      @booklover930 Месяц назад

      I, too was stuck at that point. You need to cross the threads and then move the purple knob till the thread crosses, then pull it out from below. Thus the thread from the bobbin underneath comes above and you can start sewing.

  • @swapnavarma5022
    @swapnavarma5022 3 месяца назад

    How much time will charge

    • @akiara8424
      @akiara8424  3 месяца назад

      You don’t need to charge the Mini machine; you have to use it by connecting it to power

  • @jenyjeny7268
    @jenyjeny7268 Месяц назад

    Silai tut rahi hai tension tight kr ne k baad

    • @akiara8424
      @akiara8424  Месяц назад

      We’re sorry to hear that your stitching is breaking even after adjusting the tension. Please try the following steps:
      Recheck Threading: Ensure both the upper thread and bobbin are threaded correctly.
      Needle Check: Ensure the needle is not damaged or bent, and that it's properly inserted.
      Correct Tension Setting: If the tension is too tight, it can cause the thread to break. Try adjusting the tension dial gradually to find the right setting.
      Use the Right Needle and Thread: Ensure you're using the correct needle and thread type for your fabric.
      If the issue continues, please contact us at 7718954565 for further assistance. We’re here to help!
      Best regards,
      Akiara Team

  • @Farha_Naaz
    @Farha_Naaz 3 месяца назад +1

    I am unable to refill babin

    • @akiara8424
      @akiara8424  3 месяца назад

      This video might be helpful to you.
      ruclips.net/user/shortsEF77x77nSdM?si=8jsu1i2CaeXFby_F

  • @ChandraShekhar-pt3bp
    @ChandraShekhar-pt3bp 3 месяца назад

    Silai nhi arhi h tension+ karte h to dhaga Tut rha h

    • @akiara8424
      @akiara8424  2 месяца назад

      Please get in touch with our customer care team at 771-89-54565 between 9 AM and 6 PM. You can also send your issue via WhatsApp, and we will be able to assist you more effectively

  • @alemchangalemchang6620
    @alemchangalemchang6620 3 месяца назад

    Super perfect