Yes I tried with the 2135. It is a very good combo aswell. It runs soomther on the bottom with this pipe and it is a bit faster. The 2135 makes more torque
As you can see a few seconds later in the video, I leaned the low and drop to idle was perfect. The sound from a lean high speed needle setting is different.
@MrBoomtheroom A perfect single stage idle requires a perfect ratio beween the idle gap and the low speed needle. If I lean the low and dont close the idle gap it surely cause a dual stage idle. Thats why some people tune by measuring the idle gap, I dont. JQ made a very intersting video on tuning with the idle gap
Thanks for the video I really enjoyed seeing your buggies and a bit of track driving very cool 😎
Thanks for the comment ✌️
Hello from Denmark. Great video.
I love these rc nitro videos
Hello! Thanks for stopping by 👋
Best run amd sound champ😍
Thank you my friend ✌️
@TastyBRC also welcome to suport champ..
Nice!!!!! Sounding good. Did you run a long or short manifold on the 2108?
Hey Kings. Awsome combo! It says 48 on the manifold.
@@TastyBRC yes, that's a S48. (short)You also try it with a L50
Thats the one that came with the 2135, I will try it 👍
That motor looks like it rips! Very fast! I would think that slower with 2135 seem like a better combo. Have you tried yet?
Yes I tried with the 2135. It is a very good combo aswell. It runs soomther on the bottom with this pipe and it is a bit faster. The 2135 makes more torque
im first but this engine have really power and high rpms
My favorite offroad engine!
What filter oil you use?
Donuts racing bleu air filter oil 👍
3:15 to rich on the low speed? or to lean on the high speed?
As you can see a few seconds later in the video, I leaned the low and drop to idle was perfect. The sound from a lean high speed needle setting is different.
@@TastyBRC so if you had just leaned the bottom and not closed the gap what would the effect have been ?
@MrBoomtheroom A perfect single stage idle requires a perfect ratio beween the idle gap and the low speed needle. If I lean the low and dont close the idle gap it surely cause a dual stage idle. Thats why some people tune by measuring the idle gap, I dont. JQ made a very intersting video on tuning with the idle gap
ruclips.net/video/mUY1aQTC21A/видео.htmlsi=-XwLM9-n9xHrnpge