You did a good job on this repair, but I have to say you shouldn't have used leaded solder to remove the port, that's likely what caused the traces to lift on the port. Running jumpers from the port instead of the pads is also going to make any future port replacement very difficult for other technicians who can't run jumpers. Also you went straight for the CPU for a reflow, that's not good. The BSOD is a communication issue between the CPU and RAM, so it's not always the CPU at fault and blindly reflowing it could make it a lot worse. That said, I can see you have skill. These are just my personal opinions on things you could have improved on. Keep at it!
You had your work cut out for you with this one but that end result and excitement to see it fully working again must make it worth it! Great job as always! Keep them coming 😊
thank you. below links to the pinouts drive.google.com/file/d/1FklvPdd_5GJaqw28HQ_whcHUpe5pfcLP/view?usp=sharing drive.google.com/file/d/1lxlg4T8lMstvJUtQ7rDYkyJenf2IUDhq/view?usp=sharing
You did a good job on this repair, but I have to say you shouldn't have used leaded solder to remove the port, that's likely what caused the traces to lift on the port. Running jumpers from the port instead of the pads is also going to make any future port replacement very difficult for other technicians who can't run jumpers. Also you went straight for the CPU for a reflow, that's not good. The BSOD is a communication issue between the CPU and RAM, so it's not always the CPU at fault and blindly reflowing it could make it a lot worse.
That said, I can see you have skill. These are just my personal opinions on things you could have improved on. Keep at it!
You had your work cut out for you with this one but that end result and excitement to see it fully working again must make it worth it! Great job as always! Keep them coming 😊
very interesting video do you have a link to the diagram of the alternative points of the USB C? thank you
thank you. below links to the pinouts
drive.google.com/file/d/1FklvPdd_5GJaqw28HQ_whcHUpe5pfcLP/view?usp=sharing
drive.google.com/file/d/1lxlg4T8lMstvJUtQ7rDYkyJenf2IUDhq/view?usp=sharing
@@tvpartsworld806 Thanks 💙
Anyone knows where can I get mine repaired in the US East coast?
Thank you for interest and tips video , You are the best !
cool music finally something that isn't elevator music thank you
Well done.
Good job thanks for help brother
Nice job…. 👍🏽
Niezla Robota, Kanal zapowiada sie extra Sub Polecial.. pozdrawiam z Telford...