This was extremely helpful. My model looked very similar except a few differences in the face plate. I wanted to clean it out, sheesh, lots of work! I am stuck at one point. 1:54 - Upper right hand corner is a white plug. It is attached to the front face plate. Where the heck does that plug into? I think it is to the circuit board. Not sure if at the top or bottom of right side of circuit board. I would be so grateful for a pointer! I have to put this back together tonight and stuck. I cannot see any other place. Thanks in advance. Truly great video and thanks for no music. Very good visuals!!! Keep making them please.
Great informative video. But frankly I got stuck at 3:40. The top plastic plate is much less movable in my case and I am afraid to break it. Any trick to get it detached using the flat screwdriver as seen?
Could you tell me how to reset this model, I have problems configuring the cups, it is stuck at 2x or two cups, and I can't get it to go down to 1x or 1 cup
My machine got stuck in a loop. During the coffee making process it stopped and went into cleaning mode. Now its only pouring water from the steamer after that asking me to unplug. This cycle repeats now. Maybe someone can help me.
@edsonsabadini4135 yes, inside the machine there is a mechanism. This mechanism moves the ground coffee beans into the Litter Box on the left side of the machine. Somehow the ground coffee beans landed in between the moving parts of the machine. Once they accumulated a lot there, they blocked the mechanism and therefore the sensor aswell. So the Machine thinks there are still ground coffee beans that need to be disposed. Because of that the machine doesnt continue with the next step. Open and clean it carefully, i tried it, broke it and bought a new one, maybe you have better luck🤣.
@edsonsabadini4135 sim, dentro da máquina existe um mecanismo. Este mecanismo move os grãos de café moídos para a caixa sanitária no lado esquerdo da máquina. De alguma forma, os grãos de café moídos caíram entre as partes móveis da máquina. Como acumularam muita coisa ali, bloquearam o mecanismo e, portanto, o sensor também. Então a Máquina pensa que ainda há grãos de café moídos que precisam ser descartados. Por causa disso, a máquina não continua com a próxima etapa. Abra e limpe com cuidado, experimentei, quebrei e comprei um novo, talvez você tenha mais sorte🤣.
Priceless!
This was extremely helpful. My model looked very similar except a few differences in the face plate. I wanted to clean it out, sheesh, lots of work!
I am stuck at one point. 1:54 - Upper right hand corner is a white plug. It is attached to the front face plate. Where the heck does that plug into? I think it is to the circuit board. Not sure if at the top or bottom of right side of circuit board. I would be so grateful for a pointer! I have to put this back together tonight and stuck. I cannot see any other place.
Thanks in advance. Truly great video and thanks for no music. Very good visuals!!! Keep making them please.
@mjremy2605 Did you mean 10:54 ? Yes, the white plug goes into the top right of the circuit board.
Merci super pour le démontage ❤
Great informative video.
But frankly I got stuck at 3:40. The top plastic plate is much less movable in my case and I am afraid to break it. Any trick to get it detached using the flat screwdriver as seen?
I was afraid of it myself but fortunately it worked. There had to be some sort of clip. The tool was a spudger from iFixit and plastic itself.
I would like to know how you repaired the contact points (at 13.10).
Soldering with tin or aluminum?
Yeah, thas common issue, the original "solder" is soft as butter. Yes, you can solder it back tin lead solder, it will work perfectly.
Yes, just soldering as @scott88060 mentioned
Could you tell me how to reset this model, I have problems configuring the cups, it is stuck at 2x or two cups, and I can't get it to go down to 1x or 1 cup
Sorry, no idea.
Same problem, couldn't find a solution yet, other than changing the motherboard.
What is the red thing?
Heureusement qu’il a filmé le démontage sinon bonjour le remontage
My machine got stuck in a loop.
During the coffee making process it stopped and went into cleaning mode.
Now its only pouring water from the steamer after that asking me to unplug.
This cycle repeats now.
Maybe someone can help me.
Olá, bom dia, estou seu comentário aqui, e minha máquina está com o mesmo problema, conseguiu descobrir qual foi o problema?
@edsonsabadini4135 yes, inside the machine there is a mechanism. This mechanism moves the ground coffee beans into the Litter Box on the left side of the machine.
Somehow the ground coffee beans landed in between the moving parts of the machine.
Once they accumulated a lot there, they blocked the mechanism and therefore the sensor aswell.
So the Machine thinks there are still ground coffee beans that need to be disposed.
Because of that the machine doesnt continue with the next step.
Open and clean it carefully, i tried it, broke it and bought a new one, maybe you have better luck🤣.
@edsonsabadini4135 sim, dentro da máquina existe um mecanismo. Este mecanismo move os grãos de café moídos para a caixa sanitária no lado esquerdo da máquina.
De alguma forma, os grãos de café moídos caíram entre as partes móveis da máquina.
Como acumularam muita coisa ali, bloquearam o mecanismo e, portanto, o sensor também.
Então a Máquina pensa que ainda há grãos de café moídos que precisam ser descartados.
Por causa disso, a máquina não continua com a próxima etapa.
Abra e limpe com cuidado, experimentei, quebrei e comprei um novo, talvez você tenha mais sorte🤣.
Très compliqué
работа с трупом...очень неприятное видео. познавательного -ноль.