For the miners if you put the drill vertical on the underside of the ship and then just mark the perimeter of the area you want mined, they will just mine down creating a huge open pit, collecting everything inside the zone.
If I'm not mistaken that conveyor converter you attached to the small rotor head at the drone printer is backwards. It has a big port on one side and three small in a line. You got the three small attached to a big port.
i love making hourglass style tanks (the bottom one up right and the top upside down so their tops are touching) with those industrial tanks with some of the grated catwalks on the sides for some detail
As someone else has stated your junction for the drones off the rotor is on backwards it has a large connection on one side and 3 small connections on the other also your drones are significantly under powered. those thrusters require about 1 and a 1/2 small power blocks to be fully powered. This will make your drones sluggish. I would suggest adding another small battery and trimming your thrusters down to one per direction. It could make your drones very slim as they face enemies if you placed the one up thruster on the bottom and took out the wing struts.
Oh noo! I didn't realize! Thank you for letting me know about the connection. For the thruster, yeah if it has trouble I might need to redesign it again. I probably should have actually tested it after the redesign lol
Suggestions: If you're going to have to keep reprogramming the miners, a couple of low profile spotlights on the rear thrusters looking forward might be helpful. Also, instead of hand welding the solar tunnel, you should be able to build a small welding vehicle that fits through the door.
With the PAM path, you need to record pretty much to the job start, or ensure theres a clear path between the end of the recorded path and the point when you choose "start job". And you could tell it do dump the ice itself and just come home with ores 😁 Love that damn script lol
I hope you see this in time but your drones need more batteries!! I'm actually watching this series because you're using them. But that one battery can't handle the amount of thrusters! Also, if you set it up right, you can have the AI Defensive block actually trigger the drones to undock from your base when it detects an enemy, just click on the setup actions and group those three connectors or merge blocks, and using an Event Controller built on the drone can detect the unlock and trigger the AI blocks to activate making them more autonomous. But they need more batteries! Hope you consider this in your next video!
if you want a script supplying your fighter directly you can use Isy inventory manager with his special function you can make it that some inventory item are directly sent to an inventory type block, that's how I keep my fighters resupply after each trip
20:15 LOL that absolutly was a incredible sight to behold! The way the reaver just yeeted himself into the ground was hilarious. Why did he do that tho? He didn't even get hit by the turrets and neither was there any electronic part down there. You have reaver experience from other playthroughs. Do you know why they do this?
They are coded like that because in Firefly, that is how they acted. In the show, they are humans with broken brains, living for violence first and foremost - even at the cost of Self Preservation.
Love the videos! Keep up the amazing work! Would you consider a collaboration with Splitsie and Quantum Chief? I love the videos of all 3 of you and I think a collaborative series where you all either work together as a team or as "opponents" would be amazing! Maybe a custom planet/system/scenario?
That would be a totally awesome setup! Having all 3 in either Collab or Opponents would be great! Although opponents might be a little more *Exciting*!!
Ctrl+Shift+B blueprints subgrids. IE the drone (or random ships at base) while its connected to the base via a connector(merge block off). Also print it with the thrusters off and battery already on recharge. Then use that timer to first turn batteries on auto then turn thrusters on, disconnect, and then AI on, etc. I'd use an event block on the drone build platform to lock the connector. But, only if the merge block is also connected so that you wont get stuck when trying to leave. On this same note use an event block to lock your ingot shuttles' connector instead of the recorder. Just make sure when the event block locks the connector to also have it turn itself off that way you can leave lol. you will find that this will have a lot higher success rate when docking. Cool tip/trick to get an event block to wait for multiple conditions to be met. You even get status lights lol. 1: have event block A turn on a light when battery is charged 2: have event bock B turn on another light when cargo is full. 3: have event block C look at those two status lights then launch the ship/drone via the AND checkbox and launch timer. I use this on my wandering base defense drones and cargo shuttles that go up to my space base.
If you turn on view sensor range on your drones you can view the box it’s creating as the mining job it makes lining up your jobs much easier. Also if you add PAM to a drone that has no drills it goes into transport mode and you just set a path between two connectors and it will move items and it has all of the PAM features of damage detection and keeping battery and fuel full the vanilla blocks don’t have
Honestly i think a mining ship with the mining below instead of infront that does a open pit job will allow you to mine stuff easier since it wont have a "cave" above it.
thanks for another awesome episode Andrewman 🙂 the shaking of the drone was something to do with small grids on connectors being connected while thrusters are on, try deactivating inertial dampeners while they are connected, then disconnect and reactivate the dampeners this should solve the issue... the auto cannon has more damage btw, but the dps is less than that of the gats.... meaning cos of ammo and damage per second is higher for ammo cost but lower for DPS and suggestion for your mk3, might be worth just basing what constitutes an upgraded version by the structural design.... then adding identifiers to the end of the drone version ID... for example "Expresso Mk3 AuC = Autocannon, Expresso Mk3 Gat = Gatling, Expresso Mk3 ReR = Reloadable Rockets, StR = Standard Rockets, ART = Artillery, RaG = Railgun etc and so on this would mean the hull design is the Mk3 but the loadout will be identifiable so you can account for what is out there and what's is more effective..... on the resource base I would say a fair amount of O2/H2 generators on base and some more H2 Engines would ensure the base is more powered up and that excess Ice is not going to waste as those drones aren't able to eject enough of it before they return.... and may be worth placing branched off turret placements and decoy positions about 100-200 metres around the solar tower and your base with welder repairs.... I'd say might be worth branching off underground to get them properly secured so nothing could break the connection on the surface... while having assault cannons on a higher position4 high then having 4 Gat turrets around 4 blocks out so they have more coverage without as much chance they get obliterated by the Cannons, plus the extra distance will mean if you attach a decoy 5 extra blocks on each branch of Gat Turrets, with a subsurface welder it would ensure the Decoy is online and divert any attacks from the turrets... and be able to rebuild when needed and provide more survivability for the Solar Towers to continue to do their jobs.... again thanks for another awesome episode 🙂 I look forward to the next one 🙂
@@AndrewmanGaming May not be a bad idea to set up some backup hydrogen generators too, like in an underground chamber. LOL it's not like you don't have enough ice to get hydrogen from
It would be nice to see you build a small Hydro ship to go explore the area more. Maybe go and see if you can find what's left of the ship that exploded out from under you. Also be cool to see some defence turrets around the solar tower. Have a Great one!!!
If you want to annihilate excess ice without having your dropped item count maxed out (which could end up removing the wrong dropped items), you could try sticking on a "flare stack" made of hydrogen thrusters to remove use up hydrogen so the O2/H2 generators can keep eating it. You'll probably want those to auto-shutoff if hydrogen or ice starts dropping too much, though. Also, that reaver was actually in range of the assault cannon - it has a range of 1400 meters when controlled manually (I think possibly automatically given a locked target too maybe?), though if it were me in control I'd probably miss every shot at that range anyways lol. I'd really recommend the Build Info mod as well, it can tell you stuff like the area of effect of your welders and stuff (really basically everything about the block you're placing), and it also gives air vents a scan for air leaks that can highlight where holes are for you. Just some ideas and info
Or you could use hydrogen engines instead of flaring. That way you get power as well. Flaring would only be necessary if they shut off for some reason. I think they stay on even if at 100% power in battery. They definitely keep running at night when the sun goes down. You could do the same for the miners put a hydrogen engine, tank, and h2o2 gen. That way the ice is used as fuel and batteries won't run out. I think it doesn't spend enough time at base to recharge as it takes off when empty, which with drain all is only a few seconds.
@@warriorsabe1792 they might, but at night they won't as there is no solar power. i always had problems where if i forget to turn it off, it burns through all the ice but that could be because i wasn't drawing anywhere near enough power from solar panels so they would always be on. if nothing else, it should at least drastically reduce the need for a flare stack.
Also, you have the conveyor converter on backwards. Only one side has the big conveyor. I just thought I should let you know before it becomes a problem.
Seeing you place that conveyor converter on backwards brought back some painful memories in my early SE days. Tis the reason I wont play without Build Info/Vision lol
In order to fill in the holes you made in the ground, you could check out the concrete tool mod. It is what it sounds like, it is concrete that you place in the world to repair the ground. Would be nice to see you use it a bit either to fix the holes in the ground, or change the nearby terrain to look like you have actual roads and stuff
I feel like you could make the tunnel easier if you put a welder on a piston and push it through slowly, might make access difficult but then again you could make a maintenance tunnel for construction
I’m guessing the Matya miner or however it was spelled ran out of power because it kept spitting out everything it picked up and never filled but you can change the settings on Pam so that they’ll return to base if they’re full or if their batteries go below a certain amount so they don’t work themselves to death.
My tunneling method is to use a drill and piston system attached to the base. It's slower, but it keeps it level. Works for making underground spaces like bunkers or hangars.
I suggest you put more 'ice poopers' on the back of your mining drones so they don't spend all their time just collecting ice. Also, I think [and I could be wrong] that making their mining path wider, and shorter, would be more efficient, in that they would spend more time in ore bodies, filling up close in first, which would use less power, and collect less waste.
To Totally discard ice/stone what I have done in the past if poke the connector end point underground (getting it far enough, usually about 1/2, is a requirement) , then it drops the materials underground and you don't have to worry about it any more as it falls to the center of the world :)
The double deck hydrogen tanks look like one of those glass french coffee brewers soooo.... fitting? Edit: about the tunnel, no need for ships. Just pistons and a drill. That's it easy fast and cheapo
When I was catering huge tunel I was using small drill, welder and projector on piston and the work was easy. Sometimes I also use small block wedding car.
Ok, maybe im a minimalist, but the underground tunnel can just be the interior blocks of the floor and passage 3 light on top of those. Narrow and cramped, but will save a tone of resources.
As far as I know, hydro thrusters are pretty fast at destroying floating items, so dropping ice into a large hydro thruster flame should be able to destroy it quickly. I have not tested how fast this method is with ore/ice, but I know that it is pretty damn fast at deleting components
the tunnels looks sweert if it was bigger you can do a bike kinda, also you can change the floor to conveyors? so you can put a few guns on the solar , liked to the base. maybe with small conveyors? in your base with a advance rotor small head , conveyor till the towers , then a conveyor converter? and make it large grid again ? , its cheaper on the resources that way ?
I figured out a setting for lights that makes it more like an incandescent bulb, R 255, G 230, B 212. I think it looks quite good and feels more natural or homey.
In the AI and recording stuffs it is kind of important (or not important just a good habit) to place the recording blocks in the middle axis of your connector, because then it doesn't really matter what direction they are coming in but I also like to give them multiple points of straight approach. Another tipp is to record the last waypoint (where it connects) on the connector while thrusting down, so it will HAVE to get into range to reach the last waypoint and so it doesn't miss the range of the connector. I think I didn't butcher this explanation but if I did Splits (who else) has an extremely detailed and easy tutorial on drones. (ruclips.net/video/SqZrD9tmH_E/видео.html) Hope this helps...
What if you have the sorter that dumps ice on "drain all off" My idea is that once the cargo container is full, the ice will be deposited in the connector and be dumped
Heh! Do like Shadow and Splitzie and use hydrogen tanks to bomb enemy installations! (~_^)-b Call it "The Espresso Express" or even "The Exploding Espresso Express" ~( 'w')/
I've never liked the PAM miners. Personally, I prefer building automated mining platforms. May take a little bit of extra investment but you'll be rolling in more ore than you know what to do with once you're done.
The way you see up the money's is completly wrong. And wonder why it doesnt work. Becase your a dummy and dont set it up the way its meant to be set up.and then on the welding setup for the fightjng drones completely outs the conveyor converter on backwards. You would think he is brand new to the game and doesnt know wth hes doing
![Space Engineers Survival (Episode 9) - New Ships!! [2024]](http://i.ytimg.com/vi/enOqHsmQB0o/mqdefault.jpg)
![Space Engineers Survival (Episode 9) - New Ships!! [2024]](/img/tr.png)
For the miners if you put the drill vertical on the underside of the ship and then just mark the perimeter of the area you want mined, they will just mine down creating a huge open pit, collecting everything inside the zone.
I think maybe I'll make a second set of mining ships using that concept. The version 2 of our PAM ships :)
That Reaver kamikaze woke up and chose violence. Like...What the actual "THRUSTER TRUCK" was it thinking?😂
If I'm not mistaken that conveyor converter you attached to the small rotor head at the drone printer is backwards. It has a big port on one side and three small in a line. You got the three small attached to a big port.
Correct.
Hahaha thank you for pointing that out!
Thank you my eyes were burning and my ocd was triggered
Come for the space engineering, stay for the musical performances.
Your singing always brings me joy, you sound like you're having so much fun!
31:28 yeah I enjoy his little music rewriting.
i love making hourglass style tanks (the bottom one up right and the top upside down so their tops are touching) with those industrial tanks with some of the grated catwalks on the sides for some detail
As someone else has stated your junction for the drones off the rotor is on backwards it has a large connection on one side and 3 small connections on the other also your drones are significantly under powered. those thrusters require about 1 and a 1/2 small power blocks to be fully powered. This will make your drones sluggish. I would suggest adding another small battery and trimming your thrusters down to one per direction. It could make your drones very slim as they face enemies if you placed the one up thruster on the bottom and took out the wing struts.
Oh noo! I didn't realize! Thank you for letting me know about the connection. For the thruster, yeah if it has trouble I might need to redesign it again. I probably should have actually tested it after the redesign lol
Suggestions: If you're going to have to keep reprogramming the miners, a couple of low profile spotlights on the rear thrusters looking forward might be helpful.
Also, instead of hand welding the solar tunnel, you should be able to build a small welding vehicle that fits through the door.
Very good points! I think a spotlight is a great idea, and you're right a tiny drone mining ship thing would make my life soooooo much easier.
U can use small grid connectors to throw out all ice faster
The small ones dont really put out that much. I think the larger one is putting out much more per push.
@@AndrewmanGaming what I mean u won't have large bolders u will have small ones that will despawn when you have a certain amount
With the PAM path, you need to record pretty much to the job start, or ensure theres a clear path between the end of the recorded path and the point when you choose "start job".
And you could tell it do dump the ice itself and just come home with ores 😁
Love that damn script lol
It's a little thing, but I always enjoy your spontaneous outbursts of adlibbed songs. Welding to the tune of Take On Me was a fun surprise! :D
I hope you see this in time but your drones need more batteries!! I'm actually watching this series because you're using them. But that one battery can't handle the amount of thrusters! Also, if you set it up right, you can have the AI Defensive block actually trigger the drones to undock from your base when it detects an enemy, just click on the setup actions and group those three connectors or merge blocks, and using an Event Controller built on the drone can detect the unlock and trigger the AI blocks to activate making them more autonomous. But they need more batteries! Hope you consider this in your next video!
if you want a script supplying your fighter directly you can use Isy inventory manager with his special function you can make it that some inventory item are directly sent to an inventory type block, that's how I keep my fighters resupply after each trip
si besoin d'aide pour isy inventory je me ferais un plaisir de t'aider
20:15 LOL that absolutly was a incredible sight to behold! The way the reaver just yeeted himself into the ground was hilarious. Why did he do that tho? He didn't even get hit by the turrets and neither was there any electronic part down there. You have reaver experience from other playthroughs. Do you know why they do this?
They are coded like that because in Firefly, that is how they acted. In the show, they are humans with broken brains, living for violence first and foremost - even at the cost of Self Preservation.
Love the videos! Keep up the amazing work! Would you consider a collaboration with Splitsie and Quantum Chief? I love the videos of all 3 of you and I think a collaborative series where you all either work together as a team or as "opponents" would be amazing! Maybe a custom planet/system/scenario?
That would be a totally awesome setup! Having all 3 in either Collab or Opponents would be great! Although opponents might be a little more *Exciting*!!
@@deanlawson6880 Agreed! I'm gonna ask on Splitsies and Quantum Chief's next videos as well :)
I'm not an expert on space engineers but I think you could get into space by now and could be a millionare
Ctrl+Shift+B blueprints subgrids. IE the drone (or random ships at base) while its connected to the base via a connector(merge block off). Also print it with the thrusters off and battery already on recharge. Then use that timer to first turn batteries on auto then turn thrusters on, disconnect, and then AI on, etc.
I'd use an event block on the drone build platform to lock the connector. But, only if the merge block is also connected so that you wont get stuck when trying to leave. On this same note use an event block to lock your ingot shuttles' connector instead of the recorder. Just make sure when the event block locks the connector to also have it turn itself off that way you can leave lol. you will find that this will have a lot higher success rate when docking.
Cool tip/trick to get an event block to wait for multiple conditions to be met. You even get status lights lol.
1: have event block A turn on a light when battery is charged
2: have event bock B turn on another light when cargo is full.
3: have event block C look at those two status lights then launch the ship/drone via the AND checkbox and launch timer.
I use this on my wandering base defense drones and cargo shuttles that go up to my space base.
If you turn on view sensor range on your drones you can view the box it’s creating as the mining job it makes lining up your jobs much easier. Also if you add PAM to a drone that has no drills it goes into transport mode and you just set a path between two connectors and it will move items and it has all of the PAM features of damage detection and keeping battery and fuel full the vanilla blocks don’t have
Great advice! Thanks for that. I was wondering how to do that!
Good tip, thanks
Great Episode Andrewman! Love the small fighters all lined up and armed and ready to go!
Honestly i think a mining ship with the mining below instead of infront that does a open pit job will allow you to mine stuff easier since it wont have a "cave" above it.
You're right, that would probably play a bit nicer with PAM. We'll make a second set of ships that mine straight down!
thanks for another awesome episode Andrewman 🙂
the shaking of the drone was something to do with small grids on connectors being connected while thrusters are on, try deactivating inertial dampeners while they are connected, then disconnect and reactivate the dampeners
this should solve the issue...
the auto cannon has more damage btw, but the dps is less than that of the gats.... meaning cos of ammo and damage per second is higher for ammo cost but lower for DPS
and suggestion for your mk3, might be worth just basing what constitutes an upgraded version by the structural design.... then adding identifiers to the end of the drone version ID... for example "Expresso Mk3 AuC = Autocannon, Expresso Mk3 Gat = Gatling, Expresso Mk3 ReR = Reloadable Rockets, StR = Standard Rockets, ART = Artillery, RaG = Railgun etc and so on
this would mean the hull design is the Mk3 but the loadout will be identifiable so you can account for what is out there and what's is more effective.....
on the resource base I would say a fair amount of O2/H2 generators on base and some more H2 Engines would ensure the base is more powered up and that excess Ice is not going to waste as those drones aren't able to eject enough of it before they return....
and may be worth placing branched off turret placements and decoy positions about 100-200 metres around the solar tower and your base with welder repairs.... I'd say might be worth branching off underground to get them properly secured so nothing could break the connection on the surface...
while having assault cannons on a higher position4 high then having 4 Gat turrets around 4 blocks out so they have more coverage without as much chance they get obliterated by the Cannons, plus the extra distance will mean if you attach a decoy 5 extra blocks on each branch of Gat Turrets, with a subsurface welder it would ensure the Decoy is online and divert any attacks from the turrets... and be able to rebuild when needed and provide more survivability for the Solar Towers to continue to do their jobs....
again thanks for another awesome episode 🙂 I look forward to the next one 🙂
Welding Way... I don't know what to weld today....excellent episode.
I suggest you add terrain tool / voxel tool to the series. It would fix those holes in the ground with just a bit of assembler mats.
You are talented in changing the lyrics to popular songs to fit what you are doing
The take on me cover sent me 🤣
Right now you're probably thinking "time to put up some defenses around the solar array"
You're right, they're probably warranted at this point.
Definitely some defenses around the Solar Tower! At least a couple Gatling Turrets!
@@AndrewmanGaming May not be a bad idea to set up some backup hydrogen generators too, like in an underground chamber. LOL it's not like you don't have enough ice to get hydrogen from
It would be nice to see you build a small Hydro ship to go explore the area more. Maybe go and see if you can find what's left of the ship that exploded out from under you. Also be cool to see some defence turrets around the solar tower. Have a Great one!!!
If you want to annihilate excess ice without having your dropped item count maxed out (which could end up removing the wrong dropped items), you could try sticking on a "flare stack" made of hydrogen thrusters to remove use up hydrogen so the O2/H2 generators can keep eating it. You'll probably want those to auto-shutoff if hydrogen or ice starts dropping too much, though.
Also, that reaver was actually in range of the assault cannon - it has a range of 1400 meters when controlled manually (I think possibly automatically given a locked target too maybe?), though if it were me in control I'd probably miss every shot at that range anyways lol.
I'd really recommend the Build Info mod as well, it can tell you stuff like the area of effect of your welders and stuff (really basically everything about the block you're placing), and it also gives air vents a scan for air leaks that can highlight where holes are for you.
Just some ideas and info
Or you could use hydrogen engines instead of flaring. That way you get power as well. Flaring would only be necessary if they shut off for some reason. I think they stay on even if at 100% power in battery. They definitely keep running at night when the sun goes down. You could do the same for the miners put a hydrogen engine, tank, and h2o2 gen. That way the ice is used as fuel and batteries won't run out. I think it doesn't spend enough time at base to recharge as it takes off when empty, which with drain all is only a few seconds.
@@thomasmcgrath8353 Do they? I really thought they throttled back with power draw the way reactor did.
@@warriorsabe1792 they might, but at night they won't as there is no solar power. i always had problems where if i forget to turn it off, it burns through all the ice but that could be because i wasn't drawing anywhere near enough power from solar panels so they would always be on. if nothing else, it should at least drastically reduce the need for a flare stack.
32:20 "No, that was not it, that was not it!"
Also, you have the conveyor converter on backwards. Only one side has the big conveyor. I just thought I should let you know before it becomes a problem.
Oops! Thanks for pointing that out!
@@AndrewmanGaming You're welcome.
the base has come a way it looking great
Seeing you place that conveyor converter on backwards brought back some painful memories in my early SE days. Tis the reason I wont play without Build Info/Vision lol
In order to fill in the holes you made in the ground, you could check out the concrete tool mod. It is what it sounds like, it is concrete that you place in the world to repair the ground. Would be nice to see you use it a bit either to fix the holes in the ground, or change the nearby terrain to look like you have actual roads and stuff
I feel like you could make the tunnel easier if you put a welder on a piston and push it through slowly, might make access difficult but then again you could make a maintenance tunnel for construction
you got me back into space engineers
LET HIM COOK💯💯🗣🗣
bro i was looking for something to watch, thanks for dropping a phenomenal video, keep up the good content!
Enjoying your longer episodes!
How about building some of those fighter drones u made in the last season in the ships hangar as a defense? :3
That's not a bad idea. They were a bit more beefy, and if I recall they also supported being launched with 1 button click.
@@AndrewmanGaming And it fits the "lore" of the season cause ure basically the same character from pertam, crashed on an ice moon now :3
Good video! Keep up the good work. Loving your videos :)
Great work sir.
make somekind of defense turret tower between home base and solar cell tower. Btw great video there. can't wait for the next ep.
I’m guessing the Matya miner or however it was spelled ran out of power because it kept spitting out everything it picked up and never filled but you can change the settings on Pam so that they’ll return to base if they’re full or if their batteries go below a certain amount so they don’t work themselves to death.
My tunneling method is to use a drill and piston system attached to the base. It's slower, but it keeps it level. Works for making underground spaces like bunkers or hangars.
I suggest you put more 'ice poopers' on the back of your mining drones so they don't spend all their time just collecting ice.
Also, I think [and I could be wrong] that making their mining path wider, and shorter, would be more efficient, in that they would spend more time in ore bodies, filling up close in first, which would use less power, and collect less waste.
20:42 put some defensive weapons on or next to your solar panels.
need to start pam outside of hole and set depth to the ore
It might be a good idea to add some mass blocks to your rovers so they don't fly as often when you drive anywhere.
The engagement farming is intense
The reaver had a warhead on it. The giant explosion was it detonating.
Ohhh that makes sense!
To Totally discard ice/stone what I have done in the past if poke the connector end point underground (getting it far enough, usually about 1/2, is a requirement) , then it drops the materials underground and you don't have to worry about it any more as it falls to the center of the world :)
The double deck hydrogen tanks look like one of those glass french coffee brewers soooo.... fitting?
Edit: about the tunnel, no need for ships. Just pistons and a drill. That's it easy fast and cheapo
Hahaha you have a good point. Maybe I need to rethink those hourglass tanks
When I was catering huge tunel I was using small drill, welder and projector on piston and the work was easy. Sometimes I also use small block wedding car.
I realize I'm behind, but on that tower, one option might be to put a non-deformable block up the center such as a girder.
Ok, maybe im a minimalist, but the underground tunnel can just be the interior blocks of the floor and passage 3 light on top of those. Narrow and cramped, but will save a tone of resources.
have you use the new corridor blocks from the signal update? They are cool, even have built in lights.
As far as I know, hydro thrusters are pretty fast at destroying floating items, so dropping ice into a large hydro thruster flame should be able to destroy it quickly. I have not tested how fast this method is with ore/ice, but I know that it is pretty damn fast at deleting components
He’s got a really good singing voice ❤
LOLOLO
50:50 Just pooping a little.
Ore detector may need to be facing a certain way due to auto mining, may need three instead of one. don't set max range max! (prospecting or mining)
Did he forget the truck with the huge cargo that was built explicitly to eliminate jetpacking back and forth?
the tunnels looks sweert if it was bigger you can do a bike kinda, also you can change the floor to conveyors? so you can put a few guns on the solar , liked to the base.
maybe with small conveyors? in your base with a advance rotor small head , conveyor till the towers , then a conveyor converter? and make it large grid again ? , its cheaper on the resources that way ?
ICED LATTE!!!
I figured out a setting for lights that makes it more like an incandescent bulb, R 255, G 230, B 212. I think it looks quite good and feels more natural or homey.
Put ejectors on the miners so they dump the ice
yoiu may be able to use drills to get rid of the ice
Is this a sanareo on the work page
There is! It's in the description of episode 1 of this series.
@@AndrewmanGaming I'll look one minute
@@AndrewmanGaming also making a hydrogen ship that can carry a lot of cargo
Every time I leave a tower unwelded it always gets knocked down. usually by my hand but playing the flares is a lot of fun...
Idea: build a bunker, idk why, this idea just came into my head lol
There is a plugin that allows for stone and ice removal. Can't remember the name right now.
theres a trash can mod you could use to get rid of the ice just hook it up to a sorter and should be good to go
Episode 9 coming soon?
do the mining bots ever run out of power?
can you make the tunnel larger and use a welder ship?
Now that's an idea. Maybe as it gets a little farther I'll widen it so that it doesnt extend above the land.
Gaming computers! So our oxygen and hydrogen tanks don't EXPLODE!!!
From BOREDOM!
[HOP HOP HOP!] 🐰🐇
One of his guns sniped him via defense AI. Damn
Is it overusing "Mocha" to call it the "Mocha Monorail"...?
In the AI and recording stuffs it is kind of important (or not important just a good habit) to place the recording blocks in the middle axis of your connector, because then it doesn't really matter what direction they are coming in but I also like to give them multiple points of straight approach. Another tipp is to record the last waypoint (where it connects) on the connector while thrusting down, so it will HAVE to get into range to reach the last waypoint and so it doesn't miss the range of the connector.
I think I didn't butcher this explanation but if I did Splits (who else) has an extremely detailed and easy tutorial on drones. (ruclips.net/video/SqZrD9tmH_E/видео.html)
Hope this helps...
U need turrets around ur solar Tower
Yeah I think so too. I'm starting to think I'll need turrets around everything
@@AndrewmanGaming lol u can add a pipe on the side of the tunnel
Just hear me out. Make a big gunship called Murderaloteé
What if you have the sorter that dumps ice on "drain all off"
My idea is that once the cargo container is full, the ice will be deposited in the connector and be dumped
The reaver decided that you won't get the satisfaction of killing him.
I think you should put wind turbines back on your base
What if u make hydrogen powered ships to fix the huge amount of ice you got
Make a vehicle bay under ground and a cargo door
Heh!
Do like Shadow and Splitzie and use hydrogen tanks to bomb enemy installations! (~_^)-b
Call it "The Espresso Express" or even "The Exploding Espresso Express" ~( 'w')/
Can you please fix up the mining outpost
I've never liked the PAM miners. Personally, I prefer building automated mining platforms. May take a little bit of extra investment but you'll be rolling in more ore than you know what to do with once you're done.
Monorail WOULD be epic! (~_^)-b
Waffle solar tower
if next episode is ships can you pls build an assault ship
Ep 9 plzzzzz
The way you see up the money's is completly wrong. And wonder why it doesnt work. Becase your a dummy and dont set it up the way its meant to be set up.and then on the welding setup for the fightjng drones completely outs the conveyor converter on backwards. You would think he is brand new to the game and doesnt know wth hes doing